Instruction/ maintenance manual of the product MSP-CR1100 Memorex
Go to page of 14
SPHERE TIMEBALL (CLOCK RADIO WITH ALARM) MODEL: MSP-CR1 100 BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS COMPLETELY. OPERA TING INSTRUCTIONS CR1100.
1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.
type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
5 LOCA TION OF CONTROLS 3 4 2 1 5 1. SLEEP Button (Top of Unit) 2. Snooze (ZZZ) Button (Top of Unit) 3. Display 4. ALARM Indicator 5. PM Indicator 6. TUNING Control 7. VOLUME Control 8. AM/FM Dial Scale and Pointer 9. AM/FM Switch 10. ON/OFF/AUTO/BUZZ Switch 11.
6 INST ALLA TION Unravel the AC cord and connect it to a conveniently located AC outlet having 120V and 60Hz only. The Clock Display will illuminate and “12:00” will blink in the window. NOTE: If the AC plug does not fit into a nonpolarized outlet, do not file or cut the wide blade.
7 OPERA TION Slide the ON/OFF/AUTO/BUZZ switch ❶ to the ON position to turn the unit on. Slide the AM/FM switch ❷ to the AM or FM position. 1 2 1 Tune a station by turning the TUNING control ❶ . Adjust the VOLUME control ❷ as desired. 1 2 2 TO LISTEN TO THE RADIO Antennas FM: Extend the FM antenna wire for best reception.
8 OPERA TION (CONTINUED) Press and hold the ALARM SET/AL. OFF button. 1 While holding the ALARM SET/AL. OFF button ❶ , press the HOUR button ❷ to set the desired alarm hour and the MIN button ❸ to set the desired alarm minute. 3 1 2 2 TO SET OR RESET THE ALARM TIME Set the alarm time as previously instructed.
9 OPERA TION (CONTINUED) Set the alarm time as previously instructed. Slide the ON/OFF/AUTO/ BUZZ switch to the BUZZ position. When the actual time matches the selected preset alarm time, the unit automatically turns on. To shut off the alarm, see TO SHUT THE ALARM OFF section below.
10 OPERA TION (CONTINUED) Tune the desired radio station as previously instructed. Slide the ON/OFF/AUTO/BUZZ switch to the OFF OR AUTO position. 1 Press the SLEEP button and “59” will appear on the clock display, then release the button. The unit will turn on for 59 minutes and then turn off.
11 TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM POSSIBLE POSSIBLE CAUSE SOLUTION GENERAL Power does AC line cord not Insert plug firmly not come on. plugged in. into AC outlet.
12 SPECIFICA TIONS AUDIO Frequency Range (AM) ..................................................530–1710KHz Frequency Range (FM) ......................................................88–108MHz GENERAL Power Supply..................................
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memcorpinc.com CR1100.O/M.QXD 4/16/02 3:51 PM Page 13.
An important point after buying a device Memorex MSP-CR1100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Memorex MSP-CR1100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Memorex MSP-CR1100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Memorex MSP-CR1100 you will learn all the available features of the product, as well as information on its operation. The information that you get Memorex MSP-CR1100 will certainly help you make a decision on the purchase.
If you already are a holder of Memorex MSP-CR1100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Memorex MSP-CR1100.
However, one of the most important roles played by the user manual is to help in solving problems with Memorex MSP-CR1100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Memorex MSP-CR1100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
