Instruction/ maintenance manual of the product MPD8853 Memorex
Go to page of 24
User’ s Guide Personal AM/FM Stereo Compact Disc MP3 Player MPD8853 Befor e operating this pr oduct, please r ead these instructions completely ..
1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2 INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
4 LOCA TION OF CONTROLS 13 12 14 11 2 3 4 5 6 7 8 9 10 1 15 21 16 18 19 20 17 1. LINE OUT Jack 2. Display 3. PLAY/PAUSE ( ®p )/POWER ON Button 4. Skip/TUNING DN ( o ) Button 5. DC 4.5V Jack (Rear of Unit) 6. Skip/TUNING UP ( n ) Button 7. MODE/ Ã Button 8.
5 This CD player requires either two (2) “AA” batteries (not included) or the AC adapter (not included). BATTERY INSTALLATION “Low Battery” will light in the display when batteries are low (when using battery power). 1. Open the battery compartment door on the bottom of the unit by sliding it out and then lifting it.
6 RADIO OPERA TION Set the VOLUME control 1 to minimum and plug the headphones into the PHONES jack. Press the PLAY/PAUSE ( ®p )/POWER ON button 2 to turn the unit on. 1 2 1 TO LISTEN T O THE RADIO Slide the FUNCTION switch 1 to the RADIO position. Press the MENU/ESP/BAND button 2 to select a band (AM or FM).
7 RADIO OPERA TION (CONTINUED) Tune a desired station as described in the previous section. Press the PROG. button; the preset number will blink. 1 TO SET AND RECEIVE A ST A TION INTO MEMOR Y Within ten seconds, select the desired preset using the PRESET UP ▲ 1 or DOWN ▼ 2 button to set the memory.
8 CD OPERA TION Press the PLAY/PAUSE ( ®p )/POWER ON button 1 to turn the unit on. Open the CD door by sliding the CD Door Open switch 2 . Gently press a disc, label side up, onto the spindle until it locks in place.
9 CD PLAYBACK NOTES: • See page 16 for more information on MP3’s. • When recording (“burning”) CDs, make sure the session is “finalized”, or simply record “burn” only one session. You can find more information in your recorder’s manual.
10 CD OPERA TION (CONTINUED) After you insert the disc into the CD player and the total number of tracks appear on the display, you may press either the Skip/TUNING DN o 1 or UP n 2 button to select a specific track for playback.
11 CD OPERA TION (CONTINUED) During playback, depress and hold eit her th e Skip/TUNING DN o 1 or UP n 2 button to move the player forward or backward within a track to locate a specific musical passage. The player will move forward or backward at high speed as long as the buttons are depressed.
12 CD OPERA TION (CONTINUED) To repeat all the tracks on the CD, press the MODE/ Ã button twice; “REP A” will appear in the display. 1 REPEA T PLA YBACK OF ALL TRACKS Press the PLAY/PAUSE ( ®p )/POWER ON button to begin playback.
13 CD OPERA TION (CONTINUED) While in the Stop mode, press the MODE/ Ã button 3 times (4 times if an MP3 CD with multiple directories is inserted); “INTRO” will appear in the display. 1 INTRO PLA YBACK (Will play the first 10 seconds of each track) Press the PLAY/PAUSE ( ®p )/POWER ON button to begin Intro playback.
14 CD OPERA TION (CONTINUED) While in the Stop mode, press the PROG. button. The track number will blink and “P-01” will appear in the dis- play. 1 TO PROGRAM THE MEMOR Y (UP T O 24 TRACKS) Programming is the ability to preselect the order in which a series of tracks will be played.
NOTES ON PROGRAM PLA YBACK • You can review the program by pressing the PROG. button repeatedly while in the Stop mode. • To add a track to the program memory, simply press the PROG.
MP3 F AQs–Frequently Asked Questions Please read before playing an MP3 CD. Does the unit support packet write CD-RW? Y es, it can. Y ou can add or delete MP3 files without reformatting. It appears like a PC hard drive. Can the unit read regular music CDs? Y es, it can.
17 Press the MENU/ESP/BAND button; the alphabet will appear in the display. 1 SELECTING SONGS BY MP3 TITLE You can search for a song by title as follows: Select the first letter of a file you would like to listen to using the MODE/ Ã 1 and/or RESUME/ ¨ 2 buttons.
18 Press the MENU/ESP/BAND button twice; the first directory will appear in the display, as well as its contents. 1 SEARCHING THROUGH MP3 DIRECTORIES You can search the contents of the directories (if burned on CD) as follows: To select a file from the directory, use the MODE/ Ã 1 and/or RESUME/ ¨ 2 buttons.
19 SINGLE SESSION The chart below is an example of a Windows Explorer display that will appear on your computer monitor for a single session MP3 CD ROM with directories/albums. Check the added notes to help you understand the MP3 CD unit display and the playback sequence of directories/ albums and tracks on a single session MP3 CD.
20 CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc.
21 TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not Dead batteries, or not Replace batteries, and install turn on. installed properly. properly. Weak or dead Re- Recharge or replace chargeable batteries.
Power Requirement DC ............................2 x AA (LR6) Alkaline batteries Power Requirement AC .................DC IN 4.5 V adapter (Center positive) Output level (Line out) ..............................................0.6VMS (47K Ohms) Output level (Headphone) .
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www .memorexelectronics.com.
An important point after buying a device Memorex MPD8853 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Memorex MPD8853 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Memorex MPD8853 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Memorex MPD8853 you will learn all the available features of the product, as well as information on its operation. The information that you get Memorex MPD8853 will certainly help you make a decision on the purchase.
If you already are a holder of Memorex MPD8853, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Memorex MPD8853.
However, one of the most important roles played by the user manual is to help in solving problems with Memorex MPD8853. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Memorex MPD8853 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
