Instruction/ maintenance manual of the product MP3223 Memorex
Go to page of 16
POR T ABLE STEREO SYSTEM WITH CD PLA YER AND AM/FM RADIO MODEL: MP3223 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y . OPERA TING INSTRUCTIONS MP3223.
1 Thank you for purchasing the Memorex audio system. The serial number of your unit can be found on a label on the bottom of the cabinet. We suggest that you record the serial number in the space provided below in case this information is ever needed at a future date.
2 Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1.
3 PREP ARA TION FOR USE Unpacking and Setup • Carefully remove the unit from the display carton and remove all packing material from the unit itself. • The detachable AC power cord is packed in the carton separately from the unit. Make sure that the AC power cord is not accidentally discarded with the carton or packing material.
4 LOCA TION OF CONTROLS 2 1 21 20 19 23 24 22 18 3 4 5 6 7 8 12 14 15 16 17 11 9 10 13 1. CD Function Button 2. TIMER/SLEEP Button 3. RADIO Function Button 4. AC Power Jack (Rear of Unit) 5. REPEA T/MEM-UP (Memory Up) Button 6. MEMORY/CLOCK ADJ (Adjust) Button 7.
5 With the power on, press the X- BASS button to enhance the overall bass sound; “X-BASS” will appear in the display. 1 X-BASS Press and hold the COLOR Cycle button until RHYTHM appears in the display, then release. The display color will then change according to the rhythm of the music.
6 Press the POWER ON/OFF button to turn the unit on. 1 If you press and hold the TUNING/SKIP/Search UP ❶ or TUNING/SKIP/Search DOWN ❷ button for one second, then release, the unit will automatically scan to the next broadcasting station. 1 2 4 For an enhanced Bass sound, press the X-BASS button ❶ .
7 Press the POWER ON/OFF button ❶ to turn the unit on. Press the RADIO Function button ❷ to select the Tuner mode. 1 2 1 Select the desired preset number (up to 10) by repeatedly pressing the REPEAT/MEM-UP button. 4 Press the MEMORY/CLOCK ADJ button again to set the preset.
8 PLA YING COMP ACT DISCS NORMAL PLAYBACK Press the POWER ON/OFF button ❶ to turn the unit on. Press the CD Function button ❷ to select the CD mode. 2 1 1 Press the PLAY/PAUSE ( ) button to begin playback; the current track and elapsed playing time will appear in the display.
9 During CD playback, if you wish to pause the disc momentarily, press the PLAY/PAUSE ( ) button. Playback stops but the disc continues to spin and the time blinks in the display. 1 Press the PLAY/PAUSE ( ) button again to release pause and resume normal CD playback.
10 To repeat a single track, press the REPEAT/MEM-UP button ❶ once while in the Stop mode; REPEAT will blink in the display. Press the TUNING/SKIP/Search UP ❷ or DOWN ❸ button to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE ( ) button ❹ to begin playback.
11 Press the TUNING/SKIP/Search UP ❶ or DOWN ❷ button to select the first track that you wish to program. When the desired track number (Example: Track 5) appears in the display, press the MEMORY/CLOCK ADJ button ❸ again.
12 With the power off, press and hold the TIMER/SLEEP button ❶ until “TIMER” blinks in the display. Immediately press and hold the MEMORY/CLOCK ADJ button ❷ until the hours blink in the display. 2 1 1 Within a few seconds, “TIMER” will light in the display to indicate that the timer is set.
Caring for Compact Discs • Treat the disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label.
14 Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly for Retune the AM or FM broadcast on radio broadcasts. AM or FM. station. FM: Telescopic antenna is not Reorient FM telescopic antenna. properly adjusted. AM: Unit is not positioned Rotate unit until best reception is correctly.
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www .memorexelectronics.com MP3223.QXD 3/3/03 9:53 AM Page 15.
An important point after buying a device Memorex MP3223 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Memorex MP3223 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Memorex MP3223 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Memorex MP3223 you will learn all the available features of the product, as well as information on its operation. The information that you get Memorex MP3223 will certainly help you make a decision on the purchase.
If you already are a holder of Memorex MP3223, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Memorex MP3223.
However, one of the most important roles played by the user manual is to help in solving problems with Memorex MP3223. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Memorex MP3223 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
