Instruction/ maintenance manual of the product MP3207 Memorex
Go to page of 17
POR T ABLE STEREO SYSTEM WITH CD PLA YER, AM/FM RADIO AND CASSETTE RECORDER MODEL: MP3207 BEFORE OPERA TING THIS PRODUCT , PLEASE READ THESE INSTRUCTIONS COMPLETEL Y .
1 Thank you for purchasing the Memorex audio system. The serial number of your unit can be found on a label on the bottom of the cabinet. We suggest that you record the serial number in the space provided below in case this information is ever needed at a future date.
2 Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1.
3 PREP ARA TION FOR USE Unpacking and Setup • Carefully remove the unit from the display carton and remove all packing material from the unit itself. • The detachable AC power cord is packed in the carton separately from the unit. Make sure that the AC power cord is not accidentally discarded with the carton or packing material.
4 LOCA TION OF CONTROLS 1 2 5 6 7 3 4 8 9 10 11 19 20 22 23 18 17 17 21 12 13 14 15 16 1. BASS BOOST Button 2. PHONES (Headphones) Jack 3. Carrying Handle 4. AC Power Jack (Rear of Unit) 5. FM Rod Antenna 6. POWER OFF/TAPE Button 7. MEMORY Button 8. STOP ( ■ ) Button 9.
5 OPERA TING INSTRUCTIONS Press the TUNER Function button to turn the unit on and select the Tuner mode. 1 If you press and hold the TUNING/Skip/Search UP ❶ or TUNING/Skip/Search Down ❷ button for one second, then release, the unit will automatically scan to the next broadcasting station.
6 Press the TUNER Function button to turn the unit on and select the Tuner mode. 1 Select the desired preset number (up to 15) by repeatedly pressing the PLAY/PAUSE ( )/MEM-UP button. 4 Press the MEMORY button again to set the preset. Repeat steps 2 through 4 to set more presets.
7 PLA YING COMP ACT DISCS NORMAL PLAYBACK Press the CD Function button to turn the unit on and select the CD mode. 1 Press the PLAY/PAUSE ( )/ MEM-UP button to begin playback; the current track and elapsed playing time will appear in the display. 4 Press the POWER OFF/TAPE button to turn the CD off.
8 During CD playback, if you wish to pause the disc momentarily, press the PLAY/PAUSE ( )/ MEM-UP button. Playback stops but the disc continues to spin and the track number blinks in the display. 1 Press the PLAY/PAUSE ( )/ MEM-UP button again to release pause and resume normal CD playback.
9 To repeat a single track, press the REPEAT/FM MONO button ❶ once while in the Stop mode; “ ” will blink in the display. Press the TUNING/Skip/Search Up ❷ or Down ❸ button to select the specific track that you wish to repeat.
10 Press the TUNING/Skip/Search Up ❶ or Down ❷ button to select the first track that you wish to program. When the desired track number (Example: Track 5) appears in the display, press the MEMORY button ❸ again.
11 Press the STOP/EJECT ( ■ ) button to open the cassette compartment. 1 For an enhanced Bass sound, press the BASS BOOST button ❶ . Adjust the VOLUME control ❷ as desired. 2 1 4 Press the POWER OFF/TAPE button ❶ , then press the PLAY ( ¥ ) button ❷ to begin playback.
12 Open the Cassette Door and insert a good quality blank cassette tape into the slots on the door, with the open end facing up and the full reel on the right side. Close the Cassette Door. 1 When you are ready to begin recording, press the RECORD () b utton.
SAFEGUARD AGAINST ACCIDENT AL ERASURE When a new recording is made, any program material previously recorded is automatically erased and only the new recording remains. To safeguard valuable recordings from being erased accidentally, the cassette and the deck are equipped with a special device.
Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc.
15 TROUBLESHOOTING GUIDE FOR ADDITIONAL SET -UP OR OPERA TING ASSIST ANCE, PLEASE VISIT OUR WEBSITE AT WWW .MEMOREXELECTRONICS.COM OR CONT ACT CUSTOMER SERVICE A T 1-800-919-3647 PLEASE KEEP ALL P ACKAGING MA TERIAL FOR A T LEAST 90 DA YS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www .memorexelectronics.com MP3207.O/M.QXD 3/26/03 10:20 AM Page 16.
An important point after buying a device Memorex MP3207 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Memorex MP3207 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Memorex MP3207 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Memorex MP3207 you will learn all the available features of the product, as well as information on its operation. The information that you get Memorex MP3207 will certainly help you make a decision on the purchase.
If you already are a holder of Memorex MP3207, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Memorex MP3207.
However, one of the most important roles played by the user manual is to help in solving problems with Memorex MP3207. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Memorex MP3207 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
