Instruction/ maintenance manual of the product PALERMO 29002 Mellerware
Go to page of 11
Model: 29002 1800W PLEASE READ ALL INSTRUCTIONS BEFORE USE complies with INTERNATIONAL IEC60355 SAFETY SPECIFICATIONS 2 year guarantee P ALERMO 3-IN-1 COFFEE BAR MW_EX29002_Palermo_IM.
Description A Boiler unit cover (water for espresso coffee) B Brew strength control knob C Steam control knob D Steam pipe E Drip tray cover F Steam nozzle G On/Off Switch (for espresso coffee) H Espr.
Fig. 1 Fig. 5 Fig. 9 Fig. 13 Fig. 17 Fig. 2 Fig. 6 Fig. 10 Fig. 14 Fig. 18 Fig. 3 Fig. 7 Fig. 1 1 Fig. 15 Fig. 19 Fig. 4 Fig. 8 Fig. 12 Fig. 16 Fi 16 MW_EX29002_Palermo_IM.
IMPORT ANT SAFEGU ARDS Before using the electrical appliance, the following basic precautions should always be followed. 1. Before using the coffee maker for the first time check that the voltage of wall socket and mains corresponds to coffee maker’s rating label.
the heating plate. 4. Keep your hands and the cord away from hot parts of the coffee maker during its operation. 5. Never clean with scouring powders or hard implements.
permanent nylon filter with a measuring spoon (Fig. 6). Use one spoon (15g) of ground coffee powder per cup. Y ou can adjust according to your taste. 4. Close the tank cover . Place the large jug on the warming plate directly under the drip filter coffee section.
3. Place the permanent filter into the filter holder(Fig. 1) and fill it with espresso coffee powder , according to your requirement by using the measuring spoon (marked with 2 and 4 cups)(Fig. 11) and tap down the coffee powder . This compresses the coffee for stronger flavour .
ensure the steam nozzle is immersed in the milk, and then carefully turn the steam control knob in an anti- clockwise direction for it to begin frothing milk (Fig. 17). When satisfied with the frothed milk then turn off the steam control knob to stop producing steam.
F or the section of making drip filter coffee Note: the switch referring on the following section is the switch for drip filter coffee. 1. Fill the tank with water and descaler to the MAX level (Approximate 1.25L , the scale of water to descaler is 4:1).
TROUBLE SHOOTING Symptom W ater leaking out of the Glass Jug Espresso coffee drops out too slowly (Not only for the coffee maker with pump) The metal parts in the tank have rust. W ater leaks from the bottom of coffee maker . The coffee maker does not work any more.
27 Nourse Avenue Epping 2 Cape T own P .O. Box 975 Eppindust 7475 South Africa T el: +27 21 534 8114 Fax: +27 21 534 8086 Service Centre Share Call: 086 111 5006 web: ww w .
An important point after buying a device Mellerware PALERMO 29002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mellerware PALERMO 29002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mellerware PALERMO 29002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mellerware PALERMO 29002 you will learn all the available features of the product, as well as information on its operation. The information that you get Mellerware PALERMO 29002 will certainly help you make a decision on the purchase.
If you already are a holder of Mellerware PALERMO 29002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mellerware PALERMO 29002.
However, one of the most important roles played by the user manual is to help in solving problems with Mellerware PALERMO 29002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mellerware PALERMO 29002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
