Instruction/ maintenance manual of the product MEP 191 XN Meireles
Go to page of 21
1 Hood User Manual 3110-3112-3113-3115-3120-3122-3123-3130-3131-3140 3141-3143-3150-3151-3152-3153-3155-3157-3158-3160 3161-3170-3171-3173-3174-3175-3176-3210-3272-3321 3322-3324-3325-3326-3350-3351 M.
2 DESENHOS TÉCNICOS.
3 W ARNINGS AND SAFETY PRECAUTIONS A VISOS E PRECAUÇÕES DE SEGURANÇA * Este produto está destinado a uso doméstico. * O seu produto usa voltagem de 220-240V/50Hz * O fio terra é usado na ligação eléctrica do produto. Este cabo deve ser definitivamente ligado a uma tomada segura.
4 Posição do aparelho A distância entre o aparelho e o fogão não deve ser menor a 65cm se usar uma placa eléctrica e menor do que 75cm se usar uma placa a gás. (Figura 1) Figura 1 Instalação, retire o produto da embalagem: * V erifique que não existe nenhuma deformação no produto.
5 ALERT AS DE SEGURANÇA Risco vital, risco de envenenamento! Há um risco vital de ser evenenado devido a sucção de gases combustíveis. Não opere o aparelho juntamente com aparelhos de circulação de ar quente a não ser que tenho uma boa entrada de ar garantida.
6 Operating modes Y ou may operate this appliance with discharge air mode and circulated air mode. Discharge air mode Intake air is cleaned with oil filters and discharged through a pipe system.
7 FIL TROS DE CARBONO ACTIVO Os filtros de carbono activo devem ser usados para filtrar o ar da sala sem a necessidade de tubagem, retornando o ar para a sala. Desligue o aparelho antes de colocar os filtros. Os filtros devem ser mudados de cada 3 a 5 meses de acordo com o uso.
8 Com referência ao min e max de altura do aparelho perfure os buracos D e E usando um berbequim 6mm. Instale tampões de 6mm nos buracos que furou. Figura 5 D E Figura 4 Figura 5 A B C D E Aperte os parafusos apoiantes Fixe o produto à parede nos pontos A e B com os parafusos 5,5X60.
9 Nota: se o exaustor estiver aparafusado, ajuste o alinhamento do mesmo ao soltar ligeiramente os parafusos M5 que suspendem a placa. Figura 1 1 Figura 1 1 Instalar o T ubo de Alumínio Flexível Conecte o tubo de alumínio flexível à saída de ar no produto e parede da cozinha.
10 Operação Fan level indicator Fan On/Off Fan Level Reduction Fan Level Increase Timer Lam On/Off p Ligar a V entilação Pressione no botão On/Off Aumente no + e diminua no - Ilumincação Pode ligar ou desligar a iluminação.
11 Antes de contactar o serviço técnico Assegure-se que o produto está ligado à tomada e que os fusíveis estão a funcionar . Se a Luz não funciona: .Assegure-se que o aparelho está desconectado. .V erifique os bulbos. Aperte-os ou substitua-os.
12 Hood User Manual 3110-3112-3113-3115-3120-3122-3123-3130-3131-3140 3141-3143-3150-3151-3152-3153-3155-3157-3158-3160 3161-3170-3171-3173-3174-3175-3176-3210-3272-3321 3322-3324-3325-3326-3350-3351 .
13 TECHNICAL DRA WINGS.
14 W ARNINGS AND SAFETY PRECAUTIONS *This appliance is intended for home usage. *Operating voltage of your appliance is 220-240 V olt~50 Hz. *A grounded plug is installed on the power cord of your appliance. This cord shall always be plugged to a grounded outlet.
15 APPLIANCE POSITION The distance between the appliance and the stoves should not be less than 65 cm in electric stoves and not less than 75 cm in gas and other types of stoves when the hood installation is completed. (Figure 1) Figure 1 Installation Removing the Appliance from its Package: * Check that your appliance is not deformed.
16 Vital risk, risk of poisoning! There is a vital risk of being poisoned due to the combustion gases sucked back. Do not operate the appliance together with the air-circulated fire appliances unless adequate air intake is ensured. Air-circulated fire appliances (e.
17 Carbon Filter Active carbon filters shall be used for filtering the air inside the room and giving it back to the room in environments without a flue connection. Y ou may procure the active carbon filter from your authorized dealer or service. De-energize the appliance before replacing the carbon filter .
18 Drill the D, E points with a Ø 6mm drill bit to screw the flue installation plate referring to the min. and max. heights of the appliance. Figure 5 Install 6 mm dowels to the holes you have drilled. D E Figure 4 Figure 5 A B C D E Tightening the suspension screws: Tighten 5.
19 NOTE: If the hood seems skewed, adjust the alignment of the hood by loosening the M5 screws that the suspension plates on the top are installed to. Figure 1 1 Figure 1 1 Installation of aluminum pipe: Install the flexible aluminum pipe to the plastic flue.
20 Operation This manual applies to several appliance variants. Some specifications described here may not apply to your appliance. Note: T urn on the hood when you start cooking and turn it off only after a few minutes later than you have finished cooking.
21 Before Contacting Authorized Dealer • Ensure that the appliance is plugged in the outlet and that the fuses are OK. If the Lighting Does Not Operate: • Ensure that the appliance is plugged in the outlet and that the fuses are OK. • Check the bulbs.
An important point after buying a device Meireles MEP 191 XN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meireles MEP 191 XN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meireles MEP 191 XN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meireles MEP 191 XN you will learn all the available features of the product, as well as information on its operation. The information that you get Meireles MEP 191 XN will certainly help you make a decision on the purchase.
If you already are a holder of Meireles MEP 191 XN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meireles MEP 191 XN.
However, one of the most important roles played by the user manual is to help in solving problems with Meireles MEP 191 XN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meireles MEP 191 XN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
