Instruction/ maintenance manual of the product 7900 Meco
Go to page of 24
Aussie ® ® b b y y M M e e c c o o ® LP Gas Grill Assembly and Use Manual Koala T T M M For Customer Service, call 1-800-251-7558 or visit our web site at www .
2 I. Assembly Instructions.......................................................2 Parts Illustrations................................................................3 Parts List.........................................................................
3 P ARTS ILLUSTRA TIONS If you need replacement parts, refer to the Parts Illustrations and the Parts List to find the exact parts you need. If you have any questions which require help, contact Customer Service and be sure to mention the model number of your grill.
(37) Heat Shield (38) Handle Spacer (39) Hood Handle (40) Flame Diffuser (41) Cooking Grid (43) Fabric Panel (45) LP Cylinder Heat Shield (44) Main Burner (46) Main Burner Electrode (47) Control Panel.
5 0 0 3 3 . . 6 6 2 2 2 2 2 2 . . 0 0 2 2.
6 STEP 1) Cart Assembly: Att ach the Legs to the Bottom Shelf with M5 x 35 Bolt s threaded into the Bottom Shelf holes. Position legs with the holes exactly as indicated .
STEP 2) Assemble Axle, Wheels & Wheel Covers: 7 Step 3) Assemble Hood/Bowl to Cart: · With Cart upright, align Bowl Bracket legs with Cart legs. (FIG . 3A) NOTE: REQUIRES 2-PERSONS · Lower Hood/Bowl to allow ends of Cart legs to insert into Bowl Bracket legs.
8 Step 4) Install Drip Cup: Insert Drip Cup into Drip Cup Holder ring until the cup flange is flush with the ring and the notch in the lip of the cup fit s the vertical hanger wire. (17) Drip Cup Step 5) Assemble Sidebraces and Rear Crossbrace: · Att ach Right and Lef t Sidebraces (19 & 20) to legs with ST4.
(28) Screw, M6x15 8 pcs (28) Screw , M6X15 FIG . 6A FIG . 6B (28) Screw , M6x15 (27) Lef t Side T able (26) Right Side T able Step 6) Assemble Side T ables: Align bracket holes of Lef t and Right Side T ables with holes in Bowl Leg Brackets. Att ach Side T ables with M6X15 Screws underneath.
10 Step 8) Assemble Side Burner Electrode and Side Burner: · Feed Electrode wire through upper lef t hole from large center hole in Side Burner Reflector . (FIG . 8A) Allow electrode to follow wire into hole and lie flat. (8B) FIG . 8A (32) Side Burner Electrode 1 pc (33) Side Burner 1 pc (23) Wingnut, M4 1 pc FIG .
11 (37) Heat Shield (38) Handle Spacer (38) Handle Spacer 2 pcs (37) Hood Heat Shield 1 pc (39) Hood Handle FIG . 9 (36) Bolt, M6x75 (36) Bolt, M6x75 2 pcs Step 9) Att ach Hood Handle and Shield: Open Hood. Insert M6 Bolt s through Heat Shield, Hood, through large end of Handle Sp acers and to the Handle.
Step 1 1) Install Warming Rack/Cooking Grid: Position W arming Rack as shown. (FIG . 1 1A) Insert legs 1 and 2 in holes on right side of grill Bowl and Hood respectively . While holding leg 3, insert leg 4 into hole on hood. Carefully position leg 3 into hole in grill Bowl and allow it to spring outward into position.
13 T o reduce the risk of serious bodily injury or death: · Use only propane gas in this LP gas grill. · Do not attempt to convert an LP unit to natural gas. · Any use or alteration of this unit not intended could be unsafe and will void your warranty .
Cylinder Ret ainer Clip Cylinder Carry Handle T o avoid pinching, keep fingers and hands near corners of Cylinder Ret ainer Clip when swinging Clip over cylinder . 4) Swing the Cylinder Ret ainer Clip over round shoulder of the LP cylinder . Exert pressure at ends of clip until it stop s at the cylinder carrying handle.
15 T o reduce the risk of serious bodily injury or death: · This outdoor cooking appliance shall be used only out doors and shall not be used in a building, garage, or any other enclosed area. Locate out door cooking appliance in an area with good ventilation on a level st able surface clear of combustible and flammable material.
Side Burner fittings under Side T able 16 FIG . 14C 1. Open the Hood. 2. Import ant: Make sure all control knobs are turned “Off”. (FIG . 15A) 3. T urn the LP Gas Cylinder valve open counter clockwise until it stops. (FIG . 15B) 4. Push the left control knob in and turn counter clockwise to the High flame position.
17 MANUAL LIGHTING THE GRILL 1. Open the Hood. 2. Import ant: Make sure control knobs are turned “Off”. (See FIG . 15A) 3. T urn the LP Gas Cylinder valve open counter clockwise until it stops. (See FIG . 15B) 4. Insert a lit match through match-lighting hole underneath the grill bowl on the right side.
18 GRILL COOKING ROASTING COOKING W ARMING RACK W arming racks are a convenient way to keep cooked food warm or to warm items such as bread or rolls. When opening the hood, be alert of dripping fat from the warming rack which could then drip onto the barbecue causing a mess.
3) T urn off the gas at the LP cylinder valve by turning the handle clockwise until it stops. 4) W ait until the grill is cool before closing the hood, cleaning or putting on the cover . 5) Regularly clean your LP gas grill between uses and after extended storage periods.
5) Use a pipe cleaner to clear insect nests from the inlet hole of main burner (FIG . 20C ) and side burner ventilation hole. (FIG . 20D) Open up the main burner holes and the side burner holes with a small nail or wire.Normal wear and corrosion may enlarge some holes, however , if large cracks or holes are found, replace the Burner .
STORAGE T o reduce the risk of serious bodily injury or death: · Store your LP gas grill in a cool dry place. Do not store an LP gas cylinder in a space greater than 125 degrees Fahrenheit. Do not store an LP gas cylinder in a building ,garage or any enclosed area.
LP gas cylinder is empty LP Excess flow valve tripped in regulator LP Coupling nut is not fully connected to regulator Obstructions in burner T ake LP gas cylinder to licensed LP gas supplier to be refilled. T urn control knobs to “off” position and turn LP gas cylinder handle clockwise until it stops.
I I M M P P O O R R T T A A N N T T N N O O T T I I C C E E This Gas Grill must be used with a LP Gas Cylinder equipped with an OPD (Overfill Prevention Device). This is a secondary device to prevent the overfill of your LP Gas cylinder . The proper methods for the filling of your LP Gas cylinder are by weight or volume, as described in NFP A 58.
24 P/N 03.6577.00 REV 2/23/07 MECO CORPORA TION LIMITED W ARRANTY This product is warranted to the original consumer purchaser against defects in material and workmanship under normal outdoor household use and correct assembly (if assembled by the consumer-purchaser).
An important point after buying a device Meco 7900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meco 7900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meco 7900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meco 7900 you will learn all the available features of the product, as well as information on its operation. The information that you get Meco 7900 will certainly help you make a decision on the purchase.
If you already are a holder of Meco 7900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meco 7900.
However, one of the most important roles played by the user manual is to help in solving problems with Meco 7900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meco 7900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
