Instruction/ maintenance manual of the product te923w-m Meade
Go to page of 12
FIVE-CHANNEL REMOTE THERMO-HYGROMETER For Professional W eather Station TE923W-M USER MANUAL (TS34C-M).
TABLE OF CONTENTS INTRODUCTION 3 STANDARD PACKAGE CONTENTS 3 INSTALLATION 3 BEFORE YOU BEGIN 4 FEATURES 5 TROUBLESHOOTING 7 PRECAUTIONS 7 SPECIFICATIONS 8 FCC STATEMENT 8 DECLARATION OF CONFORMITY 9 B.
Intr oduction Thank you for selecting a Meade Instruments 5-channel thermo-hygro sensor! Meade Instruments is the world’ s leading designer and manufacturer of telescopes for professional and amateur astronomers – famous for its innovative, high performance telescopes at af fordable prices.
Note: It is critical to power up and test communication between the remote sensor and the main unit BEFORE permanently mounting them outside. Befor e you begin • W e recommend using alkaline batteries for the remote thermo-hygrometer when temperatures are above 32ºF (0ºC) and lithium batteries when temperatures are below 32ºF (0ºC).
Featur es • LCD display of measured temperature and humidity • Five (5) transmission channels selection • Case can be wall mounted using built-in hanger A. LED INDICA TOR • Flashes once when the remote sensor transmits a reading to the main unit.
Battery installation • Remove the screws from the battery compartment with a small Phillips screwdriver . • Set the channel 1 through 5. The switch is located in the battery compartment. Channel 1 is typically selected if only one remote thermo-hygrometer is being used.
T roubleshooting Q: "The r emote sensor display shows dashes "---"" A: Press the RESET opening with a paper clip or similar tool. If this does not work, check the batteries and replace them.
Specifications Radio Fr equency: 433 MHz RF Reception range: 328 feet (100 m) T emperatur e Range: -40ºF to 122ºF (-40ºC to 50ºC) Resolution: 0.2ºF (0.
There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn.
BA TTER Y SAFETY INSTRUCTIONS • Always purchase the correct size (2 x 1.5V AA, 15A/15AC ANSI, LR6 IEC), (2 x ANSI/NEDA-5004LC, IEC-CR2032) and grade of battery most suitable for the intended use. • Replace all batteries of a set at the same time. • Clean the battery contacts and also those of the device prior to battery installation.
STANDARD WARRANTY INFORMATION This product is warranted by Meade Instruments Corp. (MIC) to be free of defects in materials and workmanship for a period of ONE YEAR from date of original retail purchase in the U.
Meade Instruments Corp. 27 Hubble Irvine, CA 92618 U.S.A. © 2010 Meade Instruments Corporation. All Rights Reserved. All user manual contents and information are subject to change.
An important point after buying a device Meade te923w-m (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meade te923w-m yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meade te923w-m - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meade te923w-m you will learn all the available features of the product, as well as information on its operation. The information that you get Meade te923w-m will certainly help you make a decision on the purchase.
If you already are a holder of Meade te923w-m, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meade te923w-m.
However, one of the most important roles played by the user manual is to help in solving problems with Meade te923w-m. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meade te923w-m along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
