Instruction/ maintenance manual of the product MC352 McIntosh
Go to page of 12
McIntosh Laboratory , Inc. 2 Chambers Street Binghamton, New Y ork 13903-2699 Phone: 607-723-3512 F AX: 607-724-0549 OWNERS MANUAL MC352 MC352 Power Amplifier.
2 Thank Y ou ......................................................................... 2 Please T ake a Moment ...................................................... 2 T echnical Assistance ......................................................... 2 Customer Service .
3 IMPOR T ANT SAFETY INSTRUCTIONS! PLEASE READ THEM BEFORE OPERA TING THIS EQUIPMENT . Safety Intructions General: 1. Read all the safety and operating instructions, con- tained in this owner s manual, before operating this equipment. 2. Retain this owner s manual for future reference about safety and operating instructions.
4 Performance Features Safety Instructions cont, Introduction and Performance Features Introduction · Power Output The MC352 consists of two separate power amplifier chan- nels, each capable of 350 watts into 2, 4 or 8 ohm speakers with less than 0.
5 Installation The MC352 can be placed upright on a table or shelf, standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The required panel cutout, ventilation cutout and unit dimensions are shown.
6 MC352 Rear Panel Controls and Connections Connect the MC352 power cord to a live AC outlet. Refer to information on the back panel to deter- mine the correct voltage BALANCED INPUTS for audio cables.
7 McIntosh C42 Audio Control Center How to Connect the MC352 1. Connect the MC352 power cord to a live AC outlet. 2. Connect a power control cable from the control center Power Control Out to the MC352 Power Control In. 3. Prepare the loudspeaker hookup cables as follows: A.
8 MC352 Front Panel Displays and Controls MC352 Front Panel Displays and Controls METER indicates the Left Channel Power Output of the amplifier METER Switch selects the display modes of the power out.
9 How to Operate the MC352 How to Operate the MC352 Power On T o have the MC352 automatically turn on or off when a control center turns on or off, rotate the power switch to the remote position. For manual operation, rotate the power switch to the on or off position as desired.
10 Specifications Specifications Power Output S tereo 350 watts into 2, 4 or 8 ohm loads is the minimum sine wave continuous average power output per channel both channels operating. Power Output Mono Parallel 700 watts into 1, 2 or 4 ohm loads is the minimum sine wave continuous average power output.
11 Packing Instructions In the event it is necessary to repack the equipment for shipment, the equipment must be packed exactly as shown below . It is very important that the four plastic feet are at- tached to the bottom of the equipment. Four 1/4-20 x 2-1/ 4 cap screws and washers must be used to fasten the unit securely to the shipping skid.
McIntosh Part No. 040626 McIntosh Laboratory , Inc. 2 Chambers Street Binghamton, NY 13903.
An important point after buying a device McIntosh MC352 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought McIntosh MC352 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data McIntosh MC352 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, McIntosh MC352 you will learn all the available features of the product, as well as information on its operation. The information that you get McIntosh MC352 will certainly help you make a decision on the purchase.
If you already are a holder of McIntosh MC352, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime McIntosh MC352.
However, one of the most important roles played by the user manual is to help in solving problems with McIntosh MC352. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device McIntosh MC352 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
