Instruction/ maintenance manual of the product MB3201 McCulloch
Go to page of 24
® McCulloch Corporation P .O. Box 31567 • T ucson, AZ 85751-1567 U.S.A. McCulloch Corporation P. O . Box 31567 Tu c s on, AZ 85751-1567 USA McCulloch Canada 525 Southgate Drive - Unit #2 Guelph, ON N1G 3W6 Canada MEXICO Imported by / Importe par: Comercializadora Marvel S.
E N G L I S H PLEASE READ The W ARRANTY SYMBOL indicates that unless instructions or procedures are followed any damage caused will void the warranty and repairs will be at owner ’s expense. A CAUTION may also accompany the W ARRANTY SYMBOL . Service other than user maintenance should be performed by a McCulloch Authorized Service Center .
E N G L I S H PLEASE READ The W ARRANTY SYMBOL indicates that unless instructions or procedures are followed any damage caused will void the warranty and repairs will be at owner ’s expense. A CAUTION may also accompany the W ARRANTY SYMBOL . Service other than user maintenance should be performed by a McCulloch Authorized Service Center .
3 4 E N G L I S H * 3-1. WHA T T O DO READ YOUR USER MANUAL AND ALL SUPPLEMENTS (IF ANY ENCLOSED) THOROUGHL Y BEFORE OPER- A TING YOUR UNIT . 1. WEAR CLOSE FITTING, T OUGH WORK CLOTHING that will prov.
3 4 E N G L I S H * 3-1. WHA T T O DO READ YOUR USER MANUAL AND ALL SUPPLEMENTS (IF ANY ENCLOSED) THOROUGHL Y BEFORE OPER- A TING YOUR UNIT . 1. WEAR CLOSE FITTING, T OUGH WORK CLOTHING that will prov.
6 E N G L I S H 5. DUE TO THE DANGER of exhaust fumes, never operate blower in a confined or poorly ventilated area. 6. NEVER POINT BLOWER in the direction of people, animals, buildings, automobiles, or windows, etc. 7. DO NOT operate unit without inlet cover installed to prevent contact with impeller .
6 E N G L I S H 5. DUE TO THE DANGER of exhaust fumes, never operate blower in a confined or poorly ventilated area. 6. NEVER POINT BLOWER in the direction of people, animals, buildings, automobiles, or windows, etc. 7. DO NOT operate unit without inlet cover installed to prevent contact with impeller.
8 E N G L I S H 4-1. BLOWER A TT ACHMENT ASSEMBL Y INSTRUCTIONS 1. Twist blower nozzle (A) clockwise into the straight blower tube (B) until tight (Figure 4-1A). 2. Insert the straight blower tube (B) into the blower housing (C). Align tabs (D) on tube with grooves (E) in the housing (Figure 4-1B).
8 E N G L I S H 4-1. BLOWER A TT ACHMENT ASSEMBL Y INSTRUCTIONS 1. Twist blower nozzle (A) clockwise into the straight blower tube (B) until tight (Figure 4-1A). 2. Insert the straight blower tube (B) into the blower housing (C). Align tabs (D) on tube with grooves (E) in the housing (Figure 4-1B).
10 9 E N G L I S H 3. Hold inlet cover open. Insert tube aligning tabs (L) and notches (M). Turn clockwise to lock tube into position (Figure 4-3F) . 4. Install cover screw (K) through tube tab and into housing. Tighten screw (Figure 4-3G). 4-4. SIDE HANDLE (MB3201 Blower / Vac Model) 1.
10 9 E N G L I S H 3. Hold inlet cover open. Insert tube aligning tabs (L) and notches (M). Turn clockwise to lock tube into position (Figure 4-3F) . 4. Install cover screw (K) through tube tab and into housing. Tighten screw (Figure 4-3G). 4-4. SIDE HANDLE (MB3201 Blower / Vac Model) 1.
12 11 E N G L I S H 5-4. FUEL MIXING T ABLE 5-5. RECOMMENDED FUELS Some conventional gasolines are being blended with oxygenates such as alcohol or an ether compound to meet clean air standards. Y our McCulloch engine is designed to operate satisfactorily on any gasoline intended for automotive use including oxygenated gasolines.
12 11 E N G L I S H 5-4. FUEL MIXING T ABLE 5-5. RECOMMENDED FUELS Some conventional gasolines are being blended with oxygenates such as alcohol or an ether compound to meet clean air standards. Y our McCulloch engine is designed to operate satisfactorily on any gasoline intended for automotive use including oxygenated gasolines.
14 13 E N G L I S H 7. Once engine starts leave the choke in the ST ART “ ” position for 10 seconds, then move the choke to RUN “ ” position (Figure 6-1F). Squeeze trigger to release throttle lock. 8. If engine fails to start, repeat steps 1 through 7.
14 13 E N G L I S H 7. Once engine starts leave the choke in the ST ART “ ” position for 10 seconds, then move the choke to RUN “ ” position (Figure 6-1F). Squeeze trigger to release throttle lock. 8. If engine fails to start, repeat steps 1 through 7.
16 E N G L I S H 7-2. V ACUUM OPERA TIONS (MB3201 Blower / V ac Models only) Blower Units If your unit is vac-capable and was not equipped with a vacuum kit, a vacuum attach - ment accessory kit is available for purchase at your nearest McCulloch Authorized Service Center .
16 E N G L I S H 7-2. V ACUUM OPERA TIONS (MB3201 Blower / V ac Models only) Blower Units If your unit is vac-capable and was not equipped with a vacuum kit, a vacuum attach - ment accessory kit is available for purchase at your nearest McCulloch Authorized Service Center .
18 17 E N G 8-1. AIR FIL TER CAUTION NEVER operate blower without the air filter or dust and dirt will be sucked into the engine and damage it. The air filter must be kept clean.
18 17 E N G 8-1. AIR FIL TER CAUTION NEVER operate blower without the air filter or dust and dirt will be sucked into the engine and damage it. The air filter must be kept clean.
20 19 E N G L I S H 8-6. V ACUUM BAG CLEANING A dirty bag will obstruct airflow , thereby reducing vacuum efficiency . To Clean Bag: 1. Detach vacuum bag from unit. 2. Open zipper and remove contents. 3. Turn bag INSIDE OUT and shake vigorously . This procedure should be performed on a regular basis.
20 19 E N G L I S H 8-6. V ACUUM BAG CLEANING A dirty bag will obstruct airflow , thereby reducing vacuum efficiency . To Clean Bag: 1. Detach vacuum bag from unit. 2. Open zipper and remove contents. 3. Turn bag INSIDE OUT and shake vigorously . This procedure should be performed on a regular basis.
22 21 E N G 9. Store unit in a cool, dry place away from any source of ignition such as an oil burner , water heater , etc. 8-8. REMOVING A UNIT FROM ST ORAGE 1. Remove spark plug. 2. Pull starter rope briskly to clear excess oil from combustion chamber.
22 21 E N G 9. Store unit in a cool, dry place away from any source of ignition such as an oil burner , water heater , etc. 8-8. REMOVING A UNIT FROM ST ORAGE 1. Remove spark plug. 2. Pull starter rope briskly to clear excess oil from combustion chamber.
® McCulloch Corporation P .O. Box 31567 • T ucson, AZ 85751-1567 U.S.A. McCulloch Corporation P. O . Box 31567 Tu c s on, AZ 85751-1567 USA McCulloch Canada 525 Southgate Drive - Unit #2 Guelph, ON N1G 3W6 Canada MEXICO Imported by / Importe par: Comercializadora Marvel S.
An important point after buying a device McCulloch MB3201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought McCulloch MB3201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data McCulloch MB3201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, McCulloch MB3201 you will learn all the available features of the product, as well as information on its operation. The information that you get McCulloch MB3201 will certainly help you make a decision on the purchase.
If you already are a holder of McCulloch MB3201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime McCulloch MB3201.
However, one of the most important roles played by the user manual is to help in solving problems with McCulloch MB3201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device McCulloch MB3201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
