Instruction/ maintenance manual of the product MMV5208WS Maytag
Go to page of 12
MICR O W A V E HOOD COMBINATION INSTALLATION INSTRUCTIONS MICR OW A VE HOOD COMBINATION SAFETY This pro duct is suitable for us e above electric or gas cooking products up to and incl uding 36" (91.4 c m) wide. See “Installa ti on Requirements” section for further notes.
2 INSTALLATION REQUIR EMENTS T ools and P arts T ools Needed Gather the r equired tools and part s before starting installation. Read and follow the instructio ns provided with a ny tools listed here. Parts Supplied For reor der information, see “Replacement Parts” section.
3 Installation Dimensions NOTE: The grounded 3 prong outlet must be inside the upper cabinet. See “Electrical Requir ements” section. * 30" (76.2 cm) is typical for 66" (167.6 cm) install ation height. Exact dimensions may vary depend ing on type of range/cooktop below .
4 INSTALLATION INSTRUCTIONS Remov e Mounting Plate Depending on your model, the moun ting plate may be in the foam packaging, or it may be attached to the back of the micr owave oven. NOTE: T o avoid possible damage to the work surface, cover the work surface.
5 7. Reattach damper plate. Make sur e damper plate tabs are inserted into the slots in the top of th e microwave oven . 8. Secure damper plate with 2 scr ews removed in Step 1. Roof V enting Installation Only 1. Repeat Step 1 fr om “Wa ll V enting Installation Only .
6 Locate W all Stud(s) NOTE: If no wall studs exist within the cabin et opening, do not install the microwave oven. See illustrat ions in “Possible W all Stud Configuratio ns.” 1. Using a stud finder , locate the ed ges of the wa ll stud(s) with in the opening.
7 Mark Rear W all The microwave oven must be inst alled on a minimum of 1 wall stud, preferably 2 , using a minimum of 1 lag screw , preferably 2. 1. Using measuring tape, find an d clearly mark the vertical centerlin e of the open ing. A. Centerline 2.
8 Installation for W all Stud at One End Hole (Figure 3) 1. Drill a 3/16" (5 mm) hole into the wall stud at th e end hole marked in Step 3 of “Mark Rear W all.” 2. If installing on a second wall stud, drill a 3/16" (5 mm) hole in to the wall stud at the other hole marked in Step 6 of “Mark Rear W all.
9 5. Cut the 1 ¹⁄₂ " (3.8 cm) diameter hole at the circu lar shaded area “G” on the template. This hole is for the power supply cor d. NOTE: If upper cabinet is metal, the supply cord bushing needs to be installed ar ound the supply cor d hole, as shown.
10 NOTE: If microwave ove n does not need to be adjusted, skip steps 7-9. 7. If adjustment is requir ed, ro tate micr owave oven downward. Using 2 or more people, lift microwave oven off of mounting plate, and set aside on a cover e d surface. 8. Loosen mounting plate screws.
11 V ENTING DESIGN SPECIFICATIONS This section is intended for ar chitectural designer and builder/ contractor reference onl y . NOTES: ■ V ent materials needed for instal lation are not pr ovided with microwave h ood combination. ■ W e do not recommend using a flexible metal vent.
Recommended V ent Le ngth A 3 ¹⁄₄ " x 10 " (8.3 x 25.4 cm) r ectangular or 6 " (15.2 cm) round vent should be used. The total lengt h of the vent sys tem includin g straight vent , elbow(s), transitions and wall or roof caps must not exc eed the equivalent of 140 ft (42.
An important point after buying a device Maytag MMV5208WS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maytag MMV5208WS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maytag MMV5208WS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maytag MMV5208WS you will learn all the available features of the product, as well as information on its operation. The information that you get Maytag MMV5208WS will certainly help you make a decision on the purchase.
If you already are a holder of Maytag MMV5208WS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maytag MMV5208WS.
However, one of the most important roles played by the user manual is to help in solving problems with Maytag MMV5208WS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maytag MMV5208WS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
