Instruction/ maintenance manual of the product HRX40DERT Maytag
Go to page of 32
FOR POT ABLE W A TER HEA TING ONL Y NOT SUIT ABLE FOR SP ACE HEA TING Caution: Read and Follow All Safety Rules and Operating Instructions Before First Use of This Product.
2 W ARNING At the time of manufacture this water heater was pr o- vided with a combination temperature-pr essures r elief valve certified by a nationally recognized testing labora- tory that maintains.
CAUTION WA TER HEA TERS EVENTUALL Y LEAK: Installation of the water heater must be accomplished in such a manner that if the tank or any connections should leak, the flow of water will not cause damage to the structure. For this r eason, it is not advisable to install the water heater in an attic or upper floor .
4 Sa fe ty Instructions .................................................................................................................................... 2,3 T able of Contents .......................................................................
5 Customer Information T hank Y ou for purchasing a Maytag water heater . Pr oper ly installed and maintained, it should give you years of trouble free service. It is strongl y suggested that this new water heater be professionally installed, c all a Maytag S er vice S pecialist at 1-800-365-0024 for recommended installers.
*S tandard element wattages are shown. Other element wattages (up to the maximum sho wn) are available when specified. ** W iring size based on standard 60°C copper wire. If distance from fuse box to water heater is mor e than 90 f eet, refer to your local electrical code.
7 EXP ANSION T ANKS FOR THERMAL EXP ANSION CONDITIONS A V AILABLE IN 2 GALLON (P ART NUMBER ETC2X) AND 5 GALLON (P ART NUM- BER ETC5X) CAP ACITY Accessories and T ools Needed Accessories To simplify the installation May tag has available the installa- tion parts shown below .
8 Instructions for Installation Attach a hose to the water heater drain valve and put the other end in a floor drain or outdoors. Open the water heater drain valve. Open a near by hot water faucet which will relieve pressure in the water heater and speed draining.
9 Locating The New W ater Heater Y ou should carefully c hoose an indoor location for the new water heater , bec ause the placement is a ver y impor tant con- sideration for the safet y of the occupants in the building and for the most economical use of the appliance.
10 TEMPERA TURE- PRESSURE RELIEF VA LV E COLD INLET WA TER LINE HOT OUTLET TO HOUSE THREADED TO SWEA T COUPLING 3/4 ″ THREADED NIPPLE 3/4 ″ THREADED NIPPLE FLOOR DRAIN DISCHARGE PIPE (Do not cap o.
COLD HOT 11 TEMPERA TURE- PRESSURE RELIEF V AL VE FLOOR DRAIN 6 ″ AIR GAP DISCHARGE PIPE (Do not cap or plug) CONDUIT HOT COLD WARNING “RELIEF V AL VE OPENING” This water heater is provided with.
12 Instructions for Installation (cont’d) Filling the W ater Heater To fill the water heater with water: 1. Close the water heater drain valve by turning the hand le to the right (c lockwise). The drain val ve is on the lower front of the water heater .
Wiring 13 Instructions for Installation (cont’d) 1. Pr ovide a way to easily shut off the electric power when working on the water heater . This could be with a circuit breaker or fuse block in the entrance box or a separate dis- connect switch. 2. Install and connect a circuit directly from the main fuse or circuit breaker bo x.
MODEL RA TING PLA TE FLOOR DRAIN DISCHARGE PIPE (Do not cap or plug) 6 ″ AIR GAP HOT 14 COLD TEMPERA TURE- PRESSURE RELIEF V AL VE CONDUIT HOT COLD Installation Checklist 1. Whether or not the element conversion is made, the model rating plate must be marked.
UPPER THERMOST A T ADJUST ABLE BEHIND UPPER ACCESS P ANEL 15 Service and Maintenance The thermostats of this water heater have been factor y set at a position which approximates 120°F (HOT) to reduce the risk of scald injur y .
16 Service and Maintenance (cont’d) T emperatur e-Pr essure Relief V alve Operation The temperature-pressure r elief val ve must be manually oper- ated at least once a year .
17 Service and Maintenance (cont’d) Draining The water heater should be drained if being shut down during freezing temperatures. Also periodic draining and cleaning of sediment from the tank may be necessar y . 1. Before beginning turn “OFF ” the electr ic power supply to the water heater .
18 Service and Maintenance (cont’d) 5. Remove the block of insulation to expose the terminal cover . 3. Attach a hose to the water heater drain valve and put the other end in a floor drain or outdoors. Open the water heater drain valve. Open a near by hot water faucet which will relieve pressure in the water heater and speed draining.
19 Service and Maintenance (cont’d) CAUTION Never use this water heater unless it is completely full of water . T o prevent damage to the tank and heating element, the tank must be filled with water . W ater must flow from the hot water faucet befor e turning “ON” power .
20 Drain V alve W asher Replacement NOTE: F or replacement, use a 17 ⁄ 32 ″ x 13 ⁄ 64 ″ x 1 ⁄ 8 ″ thick washer available at your nearest hardware store. F or order ing a replacement washer , refer to the “ Repair P arts” section. 1. Before beginning turn “OFF ” the electr ical power supply to the water heater .
21 Start Up Conditions THERMAL EXP ANSION W ater supply systems may , bec ause of such events as high line pressure , frequent cut-off s, the effects of water hammer among others, have installed devices such as pressure reducing valves, check val ves, back flow preventers, etc.
22 5. Replace the insulation block and pad so that it completely covers the thermostat and element. 6. Replace the access panel. 7. T urn “ON” electr ic power to the water heater .
Tr oubleshooting (cont’d) *NOTE: T o chec k where threaded portion enters tank, inser t cotton swab between jacket opening and fitting. If cotton is wet, follow “Draining ” instr uctions in the “S er vice and Maintenance ” sec- tion and then remove fitting.
24 3 7 6 8 9 11 10 13 17 16 15 12 14 18 5 10 NOTE: LO WER EL EME N T and UPPER EL EME NT : T hese water heaters have 5500 watt lower and upper elements as standard. Order par t no . 9000396 replacement element. However , your specific model may be equipped with non- standard elements.
25 MA YT AG ELECTRIC WA TER HEA TERS MODEL NUMBERS HRX40DERS 40 GALLON HRX52DERS 50 GALLON Repair Parts List (cont’d) MODEL NUMBERS KEY P ART HRX40DERS HRX52DERS NO.
MA YT AG ELECTRIC WA TER HEA TERS MODEL NUMBERS HRX30DERT 30 GALLON HRX40DERT 40 GALLON HRX52DERT 50 GALLON HRX66DERT 66 GALLON HRX82DERT 80 GALLON 26 Repair Parts List (cont’d) 3 7 6 8 9 11 10 13 1.
27 MA YT AG ELECTRIC WA TER HEA TERS MODEL NUMBERS HRX30DERT 30 GALLON HRX40DERT 40 GALLON HRX52DERT 50 GALLON HRX66DERT 66 GALLON HRX82DERT 80 GALLON Repair Parts List (cont’d) MODEL NUMBERS KEY P ART HRX30DERT HRX40DERT HRX52DER T HRX62DER T HRX82DERT NO.
Repair Parts List (cont’d) ST A TE / MA YT AG PA RT NUMBER CONVERSION KEY ST A TE MA YT AG 9000308 66001053 9000309 66001054 9000396 66001087 9000399 66001112 9000507 66001201 9000509 66001202 90009.
29 Notes.
30 Notes.
31 Notes.
Wa rranty FU LL ONE YEAR W ARRANT Y F or One Y ear from the date of Original Retail Purchase, any part whic h fails in normal home use will be repaired or r eplaced free of charge. If a leak occurs in the T ank, a new water heater of the c losest capacit y and quality then available, will be replaced free of charge.
An important point after buying a device Maytag HRX40DERT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maytag HRX40DERT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maytag HRX40DERT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maytag HRX40DERT you will learn all the available features of the product, as well as information on its operation. The information that you get Maytag HRX40DERT will certainly help you make a decision on the purchase.
If you already are a holder of Maytag HRX40DERT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maytag HRX40DERT.
However, one of the most important roles played by the user manual is to help in solving problems with Maytag HRX40DERT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maytag HRX40DERT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
