Instruction/ maintenance manual of the product MBC1 Maxxsonics
Go to page of 9
BASS CREATOR DIGITAL BASS RESTORATION THE MBC1 MA XXSONIC S.
MBC1 BASS CREA TOR DIGIT AL BASS RESTORA TION INDEX P AGE Congratulations on purchasing the MBC1! Y ou are now the proud owner of the finest and most accurate bass enhancing and restoration system available. Specifications and Feature Descriptions ...
MBC1 SPECIFICA TIONS MBC1 FEA TURES 1 Maximum Input Level.............................................................................................15V rms Maximum Output Level.........................................................................
MBC1 DRA WING 2 FREQUENCY RANGE CENTER FREQUENCY OUTPUT LEVEL CONTROL WIDE NARROW 9V .2V 4.5V 7V 2.5V GROUND ISOLA TION GROUND 200-Ohms ISOLA TED RCA INPUT BALANCED UNBALANCED INPUT OUTPUT R L R L REM.
3 CENTER FREQUENCY : This knob allows you to select the frequency you want the MBC1 bass restoration circuit to maxximize. FREQUENCY RANGE: This knob allows for you to adjust the range of frequencies from your center point.
MBC1 WIRING DIAGRAM 4 FREQUENCY RANGE CENTER FREQUENCY OUTPUT LEVEL CONTROL WIDE NARROW 9V .2V 4.5V 7V 2.5V GROUND ISOLATION GROUND 200-Ohms ISOLATED RCA INPUT BALANCED UNBALANCED INPUT OUTPUT R L R L.
5 TROUBLESHOOTING A SYSTEM The key to finding the problem in a troubled sound system is to isolate parts of that system in a logical fashion to track down the fault. The diagnostic system will not shut down the MBC1 or the amplifier(s), although the amplifier(s) own protection circuitry may shut the amplifier(s) down should a fault status occur .
6 As the manufacturer of Maxxsonics, MB Quar t, Hifonics, Cr unch and A utotek car audio products, Maxxsonics USA Inc. War rants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Y ear fr om da te of pur chase.
P ART # F81 1.
An important point after buying a device Maxxsonics MBC1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxxsonics MBC1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxxsonics MBC1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxxsonics MBC1 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxxsonics MBC1 will certainly help you make a decision on the purchase.
If you already are a holder of Maxxsonics MBC1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxxsonics MBC1.
However, one of the most important roles played by the user manual is to help in solving problems with Maxxsonics MBC1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxxsonics MBC1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
