Instruction/ maintenance manual of the product NAS 4300 Maxtor
Go to page of 2
MaxAttach NAS 4000 Series Quick Start Card Thank you for choosing a Maxtor MaxAttach™ NAS 4000 Series file server. Take a moment to verify the contents in your box and note the serial number of your MaxAttach for future reference. The procedures out- lined here assume that you are familiar with networking and system administration basics.
Connect the MaxAttach to your Network 1. Connect one of the enclosed CAT-5 Ethernet cables to either 10/100 Base T Ethernet port on the back of your MaxAttach. Insert the other end of this cable into a 10/100 Ethernet connection on your network hub or switch.
An important point after buying a device Maxtor NAS 4300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxtor NAS 4300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxtor NAS 4300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxtor NAS 4300 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxtor NAS 4300 will certainly help you make a decision on the purchase.
If you already are a holder of Maxtor NAS 4300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxtor NAS 4300.
However, one of the most important roles played by the user manual is to help in solving problems with Maxtor NAS 4300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxtor NAS 4300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
