Instruction/ maintenance manual of the product XT7800 MaxTech
Go to page of 10
USER'S MANUAL Part #MAN061 Rev. 1.0 XT7800 17 INCH COLOR MONIT OR Features • 0.28 mm Dot Pitch • 1280 x 1024, Non-Interlaced • 90 Hz Refresh Rate (VGA/SVGA) • Power Saving Operation (VESA.
1 T able of Contents Section 1 General Information ......................................................... 2 Section 2 Installation ........................................................................ 3 Section 3 Monitor Controls and LEDs ......
2 Section 1 - General Information Congratulations on purchasing the MaxTech 17-inch Color Monitor. The monitor has one of the finest CRTs available in the industry, providing a full range of video display resolutions and complies with the MPR-II standard to reduce electromagnetic emissions.
3 Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 5W. While in this mode the first and second LEDs in the Power Indicator (LEDs A and B in Figure 3-1) are off. When the synchronization signals are re-enabled the monitor returns to normal operation.
4 on the computer. • Connect the supplied power cord into the AC connector on the back of the monitor and the other end into an AC outlet. • The monitor is now ready for use. Section 3 - Monitor Controls and LEDs 1. Power Indicator LEDs A, B, and C (See Figure 3-1) indicate the operational state of the monitor.
5 5. Contrast Control Adjusts the display contrast. 6. Memory Recall Push to reset the display to the default parameters. 7-10 On-Screen Display Controls The On-Screen Display (Refer to Section 3.1) is controlled using buttons 7 through 10. The On-Screen Display is enabled by pressing any of these buttons.
6 C. Horizontal-Position Adjusts the horizontal position. The ADJ+ button moves the display to the right. The ADJ- button moves the display to the left. D. Vertical-Position Adjusts the vertical position. The ADJ+ button moves the display up. The ADJ- button moves the display down.
7 Data Area 12.75 x 9.625 in. Preset Display Modes Mode Resolution V. Frequency H. Frequency VGA 640 x 350 70 Hz 31.47 KHz VGA 640 x 400 70 Hz 31.47 KHz VGA 640 x 480 60 Hz 31.47 KHz SVGA 800 x 600 56 Hz 35.16 KHz 8514A 1024 x 768 87 Hz 35.52 KHz VGA 640 x 350 84 Hz 37.
8 2. Any product on which the serial number has been defaced, modified or removed. 3. Damage, deterioration or malfunction resulting from: a . Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature, commercial or industrial use, unauthorized product modification, or failure to follow instructions supplied with the product.
9 particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tr.
An important point after buying a device MaxTech XT7800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MaxTech XT7800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MaxTech XT7800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MaxTech XT7800 you will learn all the available features of the product, as well as information on its operation. The information that you get MaxTech XT7800 will certainly help you make a decision on the purchase.
If you already are a holder of MaxTech XT7800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MaxTech XT7800.
However, one of the most important roles played by the user manual is to help in solving problems with MaxTech XT7800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MaxTech XT7800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
