Instruction/ maintenance manual of the product XT5888 MaxTech
Go to page of 10
Part #MAN074 Rev. 1.0 M1588L Features • 0.28 mm Dot Pitch • 1024 x 768, Non-Interlaced • 90 Hz Refresh Rate (VGA/SVGA) • Power Saving Operation (VESA DPMS) • Non-Glare Screen • Full Screen.
1 T able of Contents Section 1 - General Information ............................................................ 2 Section 2 - Installation ........................................................................... 3 Section 3 - Monitor Controls and LEDs .
2 Section 1 - General Information Congratulations on purchasing a MaxTech 15-inch Color Monitor. The monitor has one of the finest CRTs available in the industry, providing a full range of video display resolutions and complies with the MPR-I standard to reduce electromagnetic emissions.
3 Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 8W. While in this mode the Power Indicator LED is amber. When the synchronization signals are re-enabled the monitor returns to normal operation.
4 • Attach the power cord to the monitor and plug it into an AC outlet. • The monitor is now ready for use. Section 3 - Monitor Controls and LEDs 1. Power Indicator: LED green: The monitor is in normal operating mode. LED amber: The monitor is in power saving mode.
5 7. Vertical-Size Adjusts the display height. 8. Vertical-Position Adjusts the vertical position. 9. Pincushion Adjusts the shape of the left and right sides of the display. 10. Rotation Control (rear of unit) Adjusts display tilt. Section 4 - Troubleshooting No picture, power indicator off • Check AC cord is plugged into outlet and monitor.
6 Synchronization Horizontal: 30-60 KHz Vertical: 50-90 Hz Deflection Geometric distortion H<=2.5mm, V<=2.5mm Linearity distortion H<=10%, V<=8% Pincushion distortion <=2mm High voltage.
7 Except as specified below, this warranty covers all defects in material or workmanship in this product. The following are not covered by the warranty: 1. Any product which is not distributed in North America by MaxTech or which is not purchased in North America from an authorized MaxTech Dealer.
8 device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
9.
An important point after buying a device MaxTech XT5888 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MaxTech XT5888 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MaxTech XT5888 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MaxTech XT5888 you will learn all the available features of the product, as well as information on its operation. The information that you get MaxTech XT5888 will certainly help you make a decision on the purchase.
If you already are a holder of MaxTech XT5888, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MaxTech XT5888.
However, one of the most important roles played by the user manual is to help in solving problems with MaxTech XT5888. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MaxTech XT5888 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
