Instruction/ maintenance manual of the product XT4862 MaxTech
Go to page of 10
USER'S MANUAL 14 INCH COLOR MONITO R XT4862 Features: • 1024 x 768, Non-Interlaced • .28 mm Dot Pitch • 72 Hz Refresh Rate (VGA/SVGA) • Power Saving Operation (VESA DPMS) • Non-Glare Screen • Full Screen Display • Easy Access Front Controls • Unlimited Palette of Colors • Plug and Play Part #MAN094 Rev 1.
1 Table of Contents Section 1 - General Information ......................................... 2 Section 2 - Installation ........................................................ 3 Section 3 - Monitor Controls and LEDs .............................. 4 Section 4 - Troubleshooting .
2 Section 1 - General Information Congratulations on purchasing a MaxTech 14-inch Color Monitor. The monitor has one of the finest CRTs available in the industry, providing a full range of video display resolutions and complies with the MPR-I standard to reduce electromagnetic emissions.
3 The monitor enters DPMS OFF mode when the computer turns off both the Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 5W. When the synchronization signals are re-enabled the monitor returns to normal operation.
4 • Make sure that power to the monitor and the computer is off. • Connect the cable from the back of the monitor to the video connector on the computer. • Attach the power cord to the monitor and plug it into an AC outlet. • The monitor is now ready for use.
5 8. Contrast Control: Adjusts the contrast. Turn clockwise to increase the contrast. 9. Brightness Control: Adjusts the display brightness. Turn clockwise to increase the brightness. Section 4 - Troubleshooting No picture, power indicator off • Check AC cord is plugged into outlet and monitor.
6 Deflection Geometric distortion H.<=2.5mm, V.<=2.5mm Linearity distortion H<=10%, V<=8% Pincushion distortion <=2mm High voltage regulation H<=4mm, V<=4mm(0-25FL) Low radiation .
7 Appendix C - Three Year Warranty MaxTech warrants to the original buyer of this product against defects in material and workmanship for three years from the date of purchase. Except as specified below, this warranty covers all defects in material or workmanship in this product.
8 address provided by the technician when you call. We recommend that the unit be insured. This warranty is valid for products sold in North America only. Contact your local authorized distributor or dealer for the warranty offered in other areas. All warranty services must be performed by Authorized Service Centers.
9 • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment into an outlet on a circuit different from that to which t.
An important point after buying a device MaxTech XT4862 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MaxTech XT4862 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MaxTech XT4862 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MaxTech XT4862 you will learn all the available features of the product, as well as information on its operation. The information that you get MaxTech XT4862 will certainly help you make a decision on the purchase.
If you already are a holder of MaxTech XT4862, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MaxTech XT4862.
However, one of the most important roles played by the user manual is to help in solving problems with MaxTech XT4862. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MaxTech XT4862 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
