Instruction/ maintenance manual of the product XT4861 MaxTech
Go to page of 10
USER'S MANUAL 14 INCH COLOR MONITO R XT4861 Features: • 1024 x 768, Non-Interlaced • .28 mm Dot Pitch • 72 Hz Refresh Rate (VGA/SVGA) • Power Saving Operation (VESA DPMS) • Full Screen Display • Easy Access Front Controls • Unlimited Palette of Colors • Plug and Play Part #MAN098 Rev 1.
1 T able of Contents Section 1 - General Information ............................................................ 2 Section 2 - Installation ........................................................................... 3 Section 3 - Monitor Controls and LEDs .
2 Section 1 - General Information Congratulations on purchasing the 14 inch Color Monitor. The monitor uses one of the finest CRTs available in the industry.
3 signal is re-enabled the monitor returns to normal operation. The monitor enters DPMS OFF mode when the computer turns off both the Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s power consumption to 3W. When the synchronization signals are re-enabled the monitor returns to normal operation.
4 connector on the rear of your computer system. The video output connector on your computer may be either in a location similar to Figure 2-2 or on an expansion board. Secure the cable to the computer using the thumbscrews on the 15-pin connector. · Attach the power cord to the monitor and plug it into an AC outlet.
5 9. Brightness Control: Adjusts the display brightness. Turn clockwise to increase the brightness. 10. Contrast Control: Adjusts the contrast. Turn clockwise to increase the contrast. Section 4 - Troubleshooting No picture, power indicators A, and B off • Check AC cord is plugged into outlet and monitor.
6 8514A 1024 x 768 87 Hz 35.52 KHz Ultra VGA 1024 x 768 60 Hz 48.36 KHz Front controls Power, Brightness, Contrast, Horizontal-Size, Hori- zontal-Position, Vertical-Size, Vertical-Position, Pincushion, Trapezoid Power saving Display Power Management Signaling (DPMS) STAND-BY mode 15W (Max.
7 warranty: 1. Any product which is not distributed in North America by MAXTECH or which is not purchased in North America from an authorized MAXTECH Dealer. 2. Any product on which the serial number has been defaced, modified or removed. 3. Damage, deterioration or malfunction resulting from: a.
8 There are no user serviceable parts inside the unit. Do not remove any components or attempt to service the unit by any unauthorized service center. This warranty is voided if the product has been abused, misused, modified, or repaired by an unauthorized service center.
9 Notice: Shielded cables, if any, must be used in order to comply with the emission limits. Any change or modification not expressly approved by the Grantee of the equipment authorization could void the user’s authority to operate the equipment.
An important point after buying a device MaxTech XT4861 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MaxTech XT4861 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MaxTech XT4861 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MaxTech XT4861 you will learn all the available features of the product, as well as information on its operation. The information that you get MaxTech XT4861 will certainly help you make a decision on the purchase.
If you already are a holder of MaxTech XT4861, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MaxTech XT4861.
However, one of the most important roles played by the user manual is to help in solving problems with MaxTech XT4861. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MaxTech XT4861 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
