Instruction/ maintenance manual of the product HX-5 MaxTech
Go to page of 4
1 HX-5 User ’ s Guide Section 1 - Introduction The MaxT ech HX-5 is a 5-port ethernet hub compliant with the IEEE 802.3 10Base-T standard. The five RJ-45 ports connect workstations or other devices together on a 10Base-T network using unshielded twisted-pair cable.
2 the cable into an open port (1 through 5 except the crossover port) on the hub (See Figure 1). The length of the cable must be less than 328 feet (100 meters). A proper network connection between the hub and an active workstation is indicated by a steady green LINK LED for that port.
3 Appendix A - Specifications Network Standard: IEEE 802.3 Ethernet 10Base-T T ransfer rate: 10 Mbps T opology: Star Max. cable length: 328 ft. (100 meters) Ports: 5 RJ-45 jacks Crossover connector: 1 (port 5) Auto-partition: Y es Polarity correction: Y es Dimensions: 5.
4 paired by an unauthorized center . In the event the product requires service, follow the procedure outlined in T echni- cal Support . When you are instructed by the T echnical Support Representative to return the product to MaxT ech for repair , you will be given an RMA (Return Mer- chandise Authorization) number .
An important point after buying a device MaxTech HX-5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MaxTech HX-5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MaxTech HX-5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MaxTech HX-5 you will learn all the available features of the product, as well as information on its operation. The information that you get MaxTech HX-5 will certainly help you make a decision on the purchase.
If you already are a holder of MaxTech HX-5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MaxTech HX-5.
However, one of the most important roles played by the user manual is to help in solving problems with MaxTech HX-5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MaxTech HX-5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
