Instruction/ maintenance manual of the product SP-320 Maxon Telecom
Go to page of 16
Operating Instructions SP - 300 Series Synthesized Scanning R adio (Models SP-310, SP-320, SP-330 & SP-340).
About Your SP-300 Series Radio Maxon's SP-300 Series radios feature 4 / 16 channel operation with superior performance and reliability. Operation and functions for Maxon's SP-300 Series radios are described in this manual. We urge you to thoroughly read this manual before operating the radio.
Table of Contents Safety Information..................................................................... Unpacking Information............................................................ SP-300 Series Features.........................................
Safety Information The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromag- netic energy emitted by FCC regulated equipment.
Unpacking Information Remove and carefully inspect the contents of your package(s) for the following items: Radio Battery Pack Antenna Spring Belt Clip Operating Instructions If any items are missing, please contact your Dealer or Maxon.
4 23 4 5 6 7 8 9 10 1 Description of Radio Components Front view: 1) Antenna Receptacle 2) Channel Selector Knob 3) On/Off - Volume Control 4) Busy/TX/BT Indicator (top plate of radio) 5) Accessory Co.
Antenna Installation Attach the antenna by turning clockwise into the antenna receptacle on top of the radio. Installing and Removing the Battery Pack Hold the radio face down in your hand. To attach the battery pack, pick up the pack by the sides and hold it so that the latch is facing upward.
6 Battery Charging and Care To ensure maximum performance from your radio, the battery pack must be fully charged before initial use. For continued performance, periodically discharge the battery completely and then fully recharge the pack. Proper care and charging will extend life of your battery pack.
7 NOTE: Federal Communications Commission Rules and Regulations require that you monitor a channel for activity before transmitting. NOTE: The tri-color LED located on the top panel can help with channel monitoring.
Status Indicators and Audible Alert Tones Your SP-300 Series has a sophisticated microprocessor control which provides a series of audible alert tones. Upon initial power up, a quick melody indicates that the self-test of the microprocessor functions has been completed satisfactorily.
Scan Modes Scanning is a Dealer programmable feature that allows you to monitor a number of channels. Your Dealer will help you define a channel "scan list" to be programmed into a scan channel (any channel, 1- 4 on models SP-310 or 320) or (any channel, 1-16 on models SP-330 or SP-340).
10 Other Scanning Features • Look Back: Any channel, when not in the scan mode, can be programmed to "look back" at the "Priority" channel.
Licensing and Service Information FCC Licensing The Federal Communications Commission requires that the operator of this radio be properly licensed under the applicable Part and / or Parts of the FCC Rules and Regulations. Consult with your Maxon Dealer, or contact the nearest FCC Field Office for information about obtaining a license.
12 Software Copyrights The Maxon product(s) described in these operating instructions may include copyrighted Maxon software programs stored in semi- conductor memories or other media.
Limited Warranty Topaz3 warrants the Products and included accessories sold herein will be free from defects in workmanship or materials under normal use and service for a period of two (2) years from the date of purchase by the original end user, provided that the buyer has complied with the requirements stated herein.
For more information, contact: Topaz3, LLC 10828 NW Air World Drive Kansas City, Missouri 64153 (Within USA) Phone: 1-800-821-7848, Ext. 399 (Outside USA) Phone: 1-816-891-6320, Ext.
An important point after buying a device Maxon Telecom SP-320 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxon Telecom SP-320 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxon Telecom SP-320 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxon Telecom SP-320 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxon Telecom SP-320 will certainly help you make a decision on the purchase.
If you already are a holder of Maxon Telecom SP-320, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxon Telecom SP-320.
However, one of the most important roles played by the user manual is to help in solving problems with Maxon Telecom SP-320. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxon Telecom SP-320 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
