Instruction/ maintenance manual of the product MAX9850 Maxim
Go to page of 2
REVISION A ERRA T A The errata listed below describe situations where the MAX9850 components perform differently than expected or dif- ferently than described in the data sheet (this Errata corresponds to Rev 1 of the MAX9850 data sheet). This errata sheet applies to all MAX9850 devices until further notice.
Figure 2 shows digital audio data formatted using the I 2 S standard. I 2 S-formatted digital audio is identified by the MSB of the data word clocked into the decoder on the second BCLK pulse following an LRCLK transition. Figure 2 shows two channels of audio data being clocked into the decoder.
An important point after buying a device Maxim MAX9850 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxim MAX9850 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxim MAX9850 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxim MAX9850 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxim MAX9850 will certainly help you make a decision on the purchase.
If you already are a holder of Maxim MAX9850, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxim MAX9850.
However, one of the most important roles played by the user manual is to help in solving problems with Maxim MAX9850. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxim MAX9850 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
