Instruction/ maintenance manual of the product AC 3000 Maxell
Go to page of 10
AC 30 0 0 Digital Camera AC/DC Power Adapter User Manual.
INTRODUCTION Congratulations! Y ou have purchased one of the most innovative products on the market today . It is designed to output DC voltage from 3.3 to 8.4v by applying input voltage 100-240Vac or 12Vdc. • Compatible to a wide range of DC camera adapters - refer to the compatibility list.
Figure 1 A F E D B C AC 3000 Parts and Components A. Voltage Indicator D. Car Cigarette Plug input (12Vdc ) B. Power and polarity indicator E. AC input blades (100-240Vac ) C.
AB C D E F G ACCESSORIES United Kingdom / Hong Kong adapter European adapter Output Plugs Tips Tips Dimension : Outer diameter * Inner Diameter * Length A 4.75 mm * 1.70 mm * 10.8 mm B 4.00 mm * 1.70 mm * 10.8 mm C 3.75 mm * 1.10 mm * 10.8 mm D 3.00 mm * 1.
OPERA TING INSTRUCTIONS IMPORT ANT : The following instructions must be read before using the adapter for the first time. This section explains how to select the output T ips and set the output voltage / polarity and power up the Adapter . Select the output Tips • Select the appropriate adapter tip for your digital camera.
Voltage Selector Knob • After confirming the polarity and voltage required, rotate the Voltage Selector Knob at the bottom to the appropriate volta ge range.
LED ST A TUS INDIC A TOR LED Status Blue / Green Power up with Positive Output DC Voltage RED Power up with Negative Output DC V oltage LED Dim Output over current No Light NO Power or Output short circuit AD APTER FITTING Installing the Adapter Insert the Adapter in the direction indicated by Arrow A until it snaps into the Main Housing.
SAFETY PRECAUTIONS & MAINTENANCE: • DO NOT use this Ada pter unit inside a drawer , closed cabinet, or cover with a cloth. The heat generated from operation may damage Adapter or equipment connected. • DO NOT attempt to open the unit. Doing so will void your warranty .
TECHNICAL SPECIFIC A TIONS: T echnology: Switching Mode Operation Power Source: AC Input: 100 – 240 V AC ( 50-60Hz) DC Input: 10 –14 VDC Input Current: AC Input: 300 mA Max. DC Input: 1.4 A Max. Output Voltage: 3.3Vdc 4.3Vdc 5.0Vdc 6.5Vdc 7.0Vdc 8.
Maxell Limited Warranty Maxell Corporation of America warrants this product to the original purchaser against defects in material and workmanship for a period of one year from the date of purchase. Maxell will, at its option, repair or replace the defective product at no cost to you during the warranty period.
An important point after buying a device Maxell AC 3000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxell AC 3000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxell AC 3000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxell AC 3000 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxell AC 3000 will certainly help you make a decision on the purchase.
If you already are a holder of Maxell AC 3000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxell AC 3000.
However, one of the most important roles played by the user manual is to help in solving problems with Maxell AC 3000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxell AC 3000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
