Instruction/ maintenance manual of the product 20050412 Masterbuilt
Go to page of 12
Masterbuilt Manufacturing, Inc. 1 Masterbuilt Ct. Columbus, GA 31907 Customer Service 1-800-489-1581 www .masterbuilt.com Manual Code: 9805100023 08161 1-04SS T ools needed for assembly: Adjustable W .
• Unit is for outdoor use only . • Never use inside enclosed areas such as patios, garages, buildings or tents. • Never use inside recreational vehicles or on boats. • Never operate unit under overhead construction such as roof coverings, carports, awnings, or overhangs.
• When outside temperature is cooler than 65°F (18°C) and/or altitude is above 3,500 feet (1067m), additional cooking time may be required. T o insure that meat is completely cooked use a meat thermometer to test internal temperature. • Opening smoker door during cooking process may extend cooking time due to heat loss.
3 SOAPY W A TER TEST W ARNINGS & PROCEDURES W ARNINGS • Soapy W ater T est MUST be performed each time gas cylinder is connected to burner/hose or each time it is used.
RECIPES MAPLE GLAZED HAM 5-7 lbs Ham Shank or Butt (fully cooked, bone in) 1 ½ cup Maple Syrup 1 tsp Ginger ¼ tsp Nutmeg ½ tsp Allspice 16 Whole Cloves 1 can Pineapple Slices (canned) 1 jar Maraschino Cherries Hickory or Mesquite Chips Remove thick skin and trim fat leaving no more than ½” thick covering on ham.
P ARTS LIST P ART NO QUANTITY DESCRIPTION P ART NO QUANTITY DESCRIPTION 1 1 Smoker Body 16 1 Control Knob (pre-assembled) 2 1 Large Smoker Door w/ Logo Plate 17 1 Burner (pre-assembled) 3 2 Air Damper.
17 DUAL SMOKER OPERA TION 1. Fill flame disk bowl with up to 8lbs (3.6kgs) of charcoal. Stack briquets in a pyramid. 2. Add lighter fl uid following directions on fl uid container . Before lighting, place lighter fl uid at least 25 ft (8m) away from unit.
7 ASSEMBL Y • BEFORE ASSEMBL Y READ ALL INSTRUCTIONS CAREFULL Y . • ASSEMBLE UNIT ON A CLEAN, FLA T SURF ACE. • TOOLS NEEDED: ADJUST ABLE WRENCH, PHILLIPS HEAD SCREWDRIVER Do not tighten screws all the way . Leg frames may need to be adjusted during assembly .
15 1 STEP 18 Hang matchstick (22) on side of smoker body (1) as shown. Assembly is complete! Perform soapy water test to check for gas leaks before use (see pg 3). Note: Soapy Water T est MUST be performed each time gas cylinder is connected to burner/hose or each time it is used.
9 ASSEMBL Y STEP 5 Attach heat shield (20) to burner box (6) using screws (B) as shown. G 1 30 STEP 6 Mount drip cup bracket (30) to smoker body (1) using screws (G). B 20 B 6 14 ASSEMBL Y STEP 15 Slide cooking grates (12), onto cooking grate supports (21).
13 ASSEMBL Y 1 31 A E STEP 14 Insert cooking grate supports (21) into smoker body (1). STEP 13 Attach tank retainer (31) to smoker body (1) using screws (A) and nuts (E) as shown. Position propane tank as shown below . Insert and tighten wing screw (I) to secure propane tank to tank retainer (31).
11 ASSEMBL Y Carefully position smoker as shown. STEP 9 Attach air damper - square (29) to smoker body (1) using screw (A) and lock nut (D). 1 A D 29 STEP 10 Attach body handle (8) to smoker body (1) using screws (F) as shown. 8 1 F F 12 ASSEMBL Y STEP 11 Insert temperature gauge w/ beauty ring (13) into smoker door (2).
An important point after buying a device Masterbuilt 20050412 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Masterbuilt 20050412 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Masterbuilt 20050412 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Masterbuilt 20050412 you will learn all the available features of the product, as well as information on its operation. The information that you get Masterbuilt 20050412 will certainly help you make a decision on the purchase.
If you already are a holder of Masterbuilt 20050412, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Masterbuilt 20050412.
However, one of the most important roles played by the user manual is to help in solving problems with Masterbuilt 20050412. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Masterbuilt 20050412 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
