Instruction/ maintenance manual of the product 20043111 Masterbuilt
Go to page of 10
CARBON MONOXIDE HAZARD Masterbuilt Manufacturing, Inc. 1 Masterbuilt Court Columbus, Georgia 31907 Customer Service 1-800-489-1581 Failure to follow these warnings and instructions properly could result in fire or explosion, which could cause property damage, personal injury , or death.
• Keep a fire extinguisher accessible at all times while operating grill. • Never leave grill unattended while in use. • Never use inside an enclosed area such as a patio, garage, building or tent. • Never use inside a vehicle, not even a recreational vehicle such as a motorhome, camper , or truck bed.
17 ITEM NO. QUANTITY DESCRIPTION 1 1 Grill Lid 2 1 Grill Body 3 3 Cooking Grate 4 2 Air Damper 5 1 W arming Rack 6 1 Front Shelf 7 2 Front Shelf Bracket 8 2 Right Short Leg 9 2 Left Long Leg 10 2 Leg Bracket 11 1 Axle 12 2 Axle Cap P ARTS LIST 2 20 23 22 21 17 7 16 11 14 18 15 6 5 2 1 ITEM NO.
3 16 (B) M6x45 Phillips Head Screw qty-14 (C) M6x70 Phillips Head Screw qty-2 (G) M6 Flat W asher qty-2 HARDW ARE LIST (H) M6 Lock W asher qty-2 (I) Cotter Clip qty-2 (A) M6x12 Phillips Head Screw qty.
REPLACEMENT P ARTS LIST ITEM NO. DESCRIPTION 9904100070 Grill Lid Kit 9904090084 Grill Body Kit 9904090033 Logo Plate Kit 9904090029 Lid Handle Kit 9904090032 T emperature Gauge Kit 990050018 Air Damp.
14 T ools needed for assembly: Adjustable Wrench Phillips Head Screwdriver Before assembly read instructions carefully . This unit is heavy . Do not assemble without assistance. Assemble grill on a clean, flat surface. 5 9 8 CAUTION: Use caution during the assembly process.
6 13 STEP 3. Attach leg bracket (10) to right short legs (8) as shown using phillips head screws (B) and hex flange nuts (D). Do not fully tighten screws at this time. B 8 D 10 STEP 18b. Position charcoal tray lifter (16) on side supports in grill body as shown.
12 7 STEP 5. Note: Attach only using hardware shown. Use phillips head screws (B) and hex flange nuts (D) on second hole in leg bracket (10) to attach left long leg (9). Do not attach hardware to first hole. This will be used for side shelf attach- ment in STEP 9.
8 11 4 A E 2 Carefully reposition grill as shown. STEP 7. Note: Do not over tighten. Air dampers should move freely . Attach air damper (4) to body (2) using phillips head screw (A) and lock nut (E) as shown. Repeat step on opposite side for remaining air damper .
10 A D 10 9 17 D B 2 18 STEP 9. Align holes on assembled side shelf (18) with holes on grill body (2) and leg bracket (10) as shown. Insert phillips head screw (A) through holes on body (2) into side shelf (18). Secure using hex flange nuts (D). Attach shelf support brackets (17) to top holes in leg bracket (17) using phil- lips head screws (B).
An important point after buying a device Masterbuilt 20043111 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Masterbuilt 20043111 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Masterbuilt 20043111 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Masterbuilt 20043111 you will learn all the available features of the product, as well as information on its operation. The information that you get Masterbuilt 20043111 will certainly help you make a decision on the purchase.
If you already are a holder of Masterbuilt 20043111, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Masterbuilt 20043111.
However, one of the most important roles played by the user manual is to help in solving problems with Masterbuilt 20043111. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Masterbuilt 20043111 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
