Instruction/ maintenance manual of the product 20040211 Masterbuilt
Go to page of 8
Failure to follow these warnings and instructions properly could result in fire or explosion, which could cause property damage, personal injury , or death. Burning charcoal gives off carbon monoxide, which has no odor and can cause death. DO NOT burn charcoal inside homes, vehicles, tents, garages or any enclosed areas.
14 LIMITED W ARRANTY INFORMA TION Masterbuilt warrants its products to be free from defects in material and workmanship under proper assembly , normal use and recommended care for 90 days from the date of original retail purchase. Masterbuilt warranty does not cover paint finish as it may burn off during normal use.
T ANGY PEANUT -SAUCED RIBS 4 lbs meaty pork spareribs or pork loin back ribs ¼ cup hot water ¼ cup peanut butter 2 tbsp lime juice 2 tbsp sliced green onion ½ tsp grated fresh ginger or ¼ tsp ground ginger ¼ tsp ground red pepper T rim fat from ribs.
3 12 (D) 1/4-20 Serrated Flange Nut qty-14 (E) 5/16” Nylon Hex Lock Nut qty-2 (F) 1/4” Aluminum Flat W asher qty-8 (H) Heat Insulation W asher qty-6 (I) Heat Insulation W asher qty-4 (J) 1/4” Lo.
11 4 DO NOT RETURN TO RET AILER For Assembly Assistance, Missing or Damaged Parts Call: MASTERBUIL T Customer Service at 1-800-489-1581 or EMAIL us at Customerservice@masterbuilt.
10 5 • Avoid bumping or impacting grill. • Keep your hands, hair and face away from burning charcoal. • This grill has an open flame. Be careful of loose hair and clothing during operation. They may catch fire. • Use protective gloves when handling this grill or working with fire.
9 6 Carefully reposition grill as shown. Tighten all hardware on legs and storage shelf before continuing. STEP 4. Place heat insulation washers (H) on base handle (9) as shown. Insert screws on base handle (9) into kettle base (2). Secure with aluminum flat washers (F) lock washers (J) and hex nuts (D).
7 STEP 7. Place heat insulations washers (H) on ash can handle as shown. Insert handle (6) into ash can (5) and secure using aluminum flat washers (F) and hex nuts (D). 6 STEP 6. Place heat insulation washers (H) on lid handle (10) as shown. Insert screws on lid handle (10) into holes in kettle lid (1).
An important point after buying a device Masterbuilt 20040211 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Masterbuilt 20040211 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Masterbuilt 20040211 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Masterbuilt 20040211 you will learn all the available features of the product, as well as information on its operation. The information that you get Masterbuilt 20040211 will certainly help you make a decision on the purchase.
If you already are a holder of Masterbuilt 20040211, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Masterbuilt 20040211.
However, one of the most important roles played by the user manual is to help in solving problems with Masterbuilt 20040211. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Masterbuilt 20040211 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
