Instruction/ maintenance manual of the product TEM-6-24 Master Bilt
Go to page of 6
ITEM NO. __________________________________________________ PROJECT __________________________________________________ LOCA TION _________________________________________________ DA TE _________________________ QTY .
TEM/TEL SERIES ENDLESS REMOTE GLASS DOOR MERCHANDISERS WITH TOP MOUNTED COIL 2 TECHNICAL SPECIFICA TIONS MODEL 120 VOL T - 1 PHASE 230 VOL T - I PHASE LIGHTS HEA TERS FANS FANS DEFROST MEDIUM TEMP 24" WIDE DOORS TEM-3-24 2.3 2.3 1.0 N/A N/A TEM-4-24 2.
3 MODULES REQUIRED FOR 30" WIDE DOOR LINEUPS & BTU PERFORMANCE DA T A NO. OF DOORS MODULES REQUIRED TOT AL OVERALL LENGTH WITH ONE P AIR OF 2" ENDS +20°F SUCTION MIN. BTUs (75°F STORE, 55% RH, +35°F A VER- AGE PRODUCT TEMP .) -11°F SUCTION MIN.
4 TECHNICAL DRA WINGS ELEV A TION VIEW PLAN VIEW SIDE VIEW.
5 TEM/TEL SERIES ENDLESS REMOTE GLASS DOOR MERCHANDISERS WITH TOP MOUNTED COIL REQUIRED CONDENSING UNITS Use this chart to determine the correct condensing unit for your endless lineup. Unless already indicated, add sufx "B" for one phase or "C" for three phase model.
BID SPECIFICA TIONS NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity . All specications subject to change without notice. Item no. TEM-_______ and/or TEL-_______. Provide__________( ) End- less Remote Glass Door Merchan- disers - T op Mounted model no.
An important point after buying a device Master Bilt TEM-6-24 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Master Bilt TEM-6-24 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Master Bilt TEM-6-24 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Master Bilt TEM-6-24 you will learn all the available features of the product, as well as information on its operation. The information that you get Master Bilt TEM-6-24 will certainly help you make a decision on the purchase.
If you already are a holder of Master Bilt TEM-6-24, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Master Bilt TEM-6-24.
However, one of the most important roles played by the user manual is to help in solving problems with Master Bilt TEM-6-24. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Master Bilt TEM-6-24 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
