Instruction/ maintenance manual of the product 80RD Marvel Industries
Go to page of 12
Marvel 80RD Inst allation Operation & Maintenance Instructions.
Remove Packaging Y our drawer refrigerator has been packed for ship- ment with all parts that could be damaged by movement securely fastened. Before installing the drawer refrigerator , be sure all packing materials and tape have been removed.
Select Location The proper location will ensure peak perform- ance of your drawer refrigerator . Choose a loca- tion away from heat and out of direct sunlight.
Control Panel The temperature of your drawer unit ranges from 32°F to 47°F (0°C to 8°C). The temperature can be adjusted using the control panel located on the inside of the top drawer . T o change the tempera- ture setting, press the warmer or cooler pads until the display shows the desired temperature.
CARE AND CLEANING OF YOUR DRA WER REFRIGERA T OR Condenser The condenser tubing inside the cabinet does not require frequent cleaning; however , satisfactory cooling depends on adequate ventilation over the coils. Be sure that nothing obstructs the required air flow openings in front of the cabinet.
FULL OVERLA Y P ANEL INST ALLA TION INSTRUCTIONS 6 Pilot Hole Drill Sizes for Wood Screws Wood Screw Size Hardwood Softwood Work Material 8 3/32 5/64 5/16 PHILLIPS HEAD SCREWS HOLDING DRA WER FRONT GA.
Step 3: Sizing the Overlay Panel Step 4: Attaching the Overlay Panel to the Door 1. Set overlay panel on drawer front face and align edges. Clamp panel in position and mark pilot hole locations. See step 3 for nominal size and hole locations. Drill pilot holes (remove panel if necessary , re-align and re-clamp overlay to drawer face).
TROUBLESHOOTING POSSIBLE CAUSE • Unit interior needs cleaned. • Unit not level. • Unit not level. • Weak floor . • LED light burned out. • No power at outlet. • Control Panel turned “OFF”. • Line Cord not plugged into power source.
Before Calling for Service Before calling for service, check the following items: • Make sure unit is plugged into outlet. • Check the outlet for power . T est outlet with lamp to make certain outlet has power . • Make sure drawer refrigerator is “ON”.
Entire Product Limited One Y ear Parts and Labor Warranty Marvel warrants that it will supply all necessary parts and labor to repair or replace in the end user's home or office, any component wh.
NOTES 11.
41009146A WWW .MAR VELINDUSTRIES.COM Phone: (765) 962-2521 Fax: (765) 962-2493 MAR VEL INDUSTRIES 233 Industrial Parkway P .O. Box 997 Richmond, IN 47375-0997.
An important point after buying a device Marvel Industries 80RD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marvel Industries 80RD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marvel Industries 80RD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marvel Industries 80RD you will learn all the available features of the product, as well as information on its operation. The information that you get Marvel Industries 80RD will certainly help you make a decision on the purchase.
If you already are a holder of Marvel Industries 80RD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marvel Industries 80RD.
However, one of the most important roles played by the user manual is to help in solving problems with Marvel Industries 80RD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marvel Industries 80RD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
