Instruction/ maintenance manual of the product 61ARMBSFR Marvel Industries
Go to page of 20
Installation Operation and Maintenance Instructions R efrigerator Models 30ARM 61ARM 3O ARM 6O ARM 6AD AM MARVEL.
1 T ABLE OF CONTENTS Unpacking your refrigerator ........................ ......... ..2 Removing the packaging...................... ............ ..2 W arranty Registration..................... ................. ....2 Installing your refrigerator ....
UNP A CKING Y OUR REFRIGERA T OR 2 Remove P ackaging Y our refrigerator has been packed for shipment with all parts that could be damaged by movement securely fastened. Cut the banding material at the bottom of the carton, unfold the carton at the bottom and remove the carton from the appliance.
INST ALLING Y OUR REFRIGERA T OR 3 Figure 2 Do not splash or spray water from a hose on the re- • frigerator! Doing so may cause an electrical shock, which may result in severe injury or death. This unit should not, under any circumstances, be • ungrounded.
4 USING Y OUR MicroSentry ™ REFRIGERA T OR CONTROL Figure 3 Control Door Switch During initial startup, or anytime power is interrupted, there will be an approximate 5 minute delay before the refrigerator starts.
5 USING Y OUR MicroSentry ™ REFRIGERA T OR CONTROL Alarm Mute Press any key to mute the audible portion of an alarm,. NO TE- This action will only mute the alarm. If the condition that caused the alarm continues, the alarm code will contin- ue to flash and will sound for 20 seconds every 60 minutes.
DIMENSIONS FOR MODELS 30ARM & 3O ARM 14-7/8” (37.78 cm) 21-3/16” (53.82 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 23-9/32” (59.13 cm) 25-7/32” (64.06 cm) 37-5/32” (94.39 cm) 16-9/16” (42.06 cm) 6 * Depth dimension may vary depending on each individual installation.
DIMENSIONS FOR MODELS 30ARM WITH O VERLA Y DOOR 14-7/8” (37.78 cm) 34-1/4” to 34-1/2” (87 to 87.6 cm) 37-5/32” (94.39 cm) 23-1/4” (59.06 cm) 22-17/32” (57.23 cm) 21-3/16” (53.82 cm) * Depth dimension may vary depending on each individual installation.
8 R ecommended R ough in Opening Dimensions, Models 6O ARM & 61ARM *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 34-1/2” (87.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max.
R ecommended R ough in Opening Dimensions, Model 61ARM Overlay Door *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 34-1/2” (87.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max.
10 *24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 32-1/2” (82.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required.
*24” (61 cm) standard cabinet depth * Depth dimension may vary depending on each individual installation. 32-1/2” (82.6 cm) Electrical Requirements: 115 volts, 3.3 amps running max. 15 amp dedicated circuit required. 3 prong grounded receptacle required.
12 FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 1: V erify door alignment The door should be parallel to the sides and top of the refrigerator . If alignment is necessary the door may be adjusted by loosening the 2 screws which secure the hinge adapter brackets to the door and adjusting the door side to side.
FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 6: Drill holes in overlay panel Remove the hinge adapter bushings from the top and bottom door hinge adapters. (See Figure 8).Using the holes in the hinge adapters drill 5/16” (8mm) diameter clearance holes into the overlay panels 3/4” (20mm) deep.
14 FULL O VERLA Y P ANEL INST ALLA TION INSTRUCTIONS Step 9: Secure overlay panel to the door . With the #8 wood screws provided fasten the overlay panel to the door . (See Figure 7). Step 10: Install lock cam (Models with locks only). Attach the lock cam to the back of the lock assembly with the phillips head machine screw provided.
Condenser Air Flow The machine compartment located beneath the cabinet does not require frequent cleaning; however , satisfactory performance depends on adequate ventilation. Be sure nothing obstructs the required air flow openings in front of the cabinet.
16 TROUBLESHOO TING Y OUR REFRIGERA T OR Problem P ossible Cause Remedy Unit not cold enough Adjust temperatures (See “Set the de- sired temperature” on page 13) Control set too warm • Airflow to front grille blocked. • Excessive usage or prolonged door • openings.
P arts or Service Not Supplied or Designated by Marvel The above warranties also do not apply if: The original bill of sale, deliver date, or serial number • cannot be verified. Defective parts are not returned for inspection if so • requested by Marvel.
18 APPENDIX A , ADDITIONAL MicroSentry ™ FEA TURES Information Menu: The following features are available on the Information Menu. • CurrentT emperature • MaximumStoredT emperatur.
All specifications and product designs subject to change without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, replacements or compensation for previously purchased products. www .marvelrefrigeration.
An important point after buying a device Marvel Industries 61ARMBSFR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marvel Industries 61ARMBSFR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marvel Industries 61ARMBSFR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marvel Industries 61ARMBSFR you will learn all the available features of the product, as well as information on its operation. The information that you get Marvel Industries 61ARMBSFR will certainly help you make a decision on the purchase.
If you already are a holder of Marvel Industries 61ARMBSFR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marvel Industries 61ARMBSFR.
However, one of the most important roles played by the user manual is to help in solving problems with Marvel Industries 61ARMBSFR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marvel Industries 61ARMBSFR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
