Instruction/ maintenance manual of the product 3BARM Marvel Industries
Go to page of 12
Installation Operation and Maintenance Instructions R efrigerated Beverage Center 3BARM & 6BARM MARVEL REFRIGERA TED BEVERA GE CENTER.
Remove P ackaging Y our beverage center has been packed for shipment with all parts that could be damaged by movement securely fastened. Before using, be sure all packing materials and tape have been removed. Important Keep your carton packaging until your beverage center has been thoroughly inspected and found to be in good condi- tion.
INST ALLING Y OUR BEVERAGE CENTER Select Location The proper location will ensure peak performance of your appliance. Choose a location where the unit will be out of direct sunlight and away from heat sources.
Start Y our Appliance T o start your appliance, plug it into a power supply . Push and hold the “ ON/OFF ” button located on the display panel for three (3) seconds (see Figure 3).
4 MICROSENTR Y ™ REFRIGERA TION MONIT OR W arning Alarms Y our beverage center has been fitted with a MicroSentry ™ refrigeration monitor . This monitor will let you know if your cellar is not functioning properly for optimum wine and beverage storage.
Insert Wine Bottles The wine rack pull-out shelf holds four (4) bottles. See Figure 4 for typical wine bottle orientation. The wine rack can be located at the middle or bottom part of the inte- rior cabinet. F or red wines, place wine shelf at bottom shelf position in the cabinet.
6BARM BEVERA GE CENTER FEA TURES Insert Wine Bottles The wine rack pull-out shelf holds eight (8) bottles. See Figure 7 for typical wine bottle orientation. The wine rack can be located at the middle or bottom part of the inte- rior cabinet. F or red wines, place wine shelf at bottom shelf position in the cabinet.
7 Do NO T under any circumstance use a light bulb that exceeds 15 watts! T o replace the light bulb, disconnect power to the unit. Un- screw the old light bulb located behind the display housing at the top of the unit. Set the old light bulb aside. Screw the new light bulb into place.
Help Prevent T ragedies Each year children die because they climb inside a discarded refrigeration product, get trapped inside and suffocate. T ake precau- tions to prevent such tragedies by removing the door or by taping or chaining it shut before discarding.
9 OBT AINING SERVICE FOR Y OUR BEVERAGE CENTER If Y ou Do Need Service If you do need service, contact your dealer or Marvel Indus- tries. In any correspondence, refer to the model number and serial number of your unit which is located on the upper left hand side of the wall liner .
Entire Product Limited One Y ear P arts and Labor W arranty Marvel warrants that it will supply all necessary parts and labor to repair or replace in the end user ’s home or office, any component w.
Marvel Industries P .O. Box 997 Richmond, IN 47375-0997 800.428.6644 An AGA Company 41010735 Rev . E 03.03.08 www .lifeluxurymarvel.com All specifications and product designs subject to change without notice.
An important point after buying a device Marvel Industries 3BARM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marvel Industries 3BARM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marvel Industries 3BARM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marvel Industries 3BARM you will learn all the available features of the product, as well as information on its operation. The information that you get Marvel Industries 3BARM will certainly help you make a decision on the purchase.
If you already are a holder of Marvel Industries 3BARM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marvel Industries 3BARM.
However, one of the most important roles played by the user manual is to help in solving problems with Marvel Industries 3BARM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marvel Industries 3BARM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
