Instruction/ maintenance manual of the product OR-841-HDSDI Marshall electronic
Go to page of 24
OR-841-HDSDI Fully Featured 8.4” Rack Mountable / Camera-Top / Portable LCD Field Monitor Operating Instructions Marshall Electronics.
Contents Product Overview ............................................................................................................................................................................. 3 Features ........................................
Product Overview The Orchid OR-841-HDSDI is a single 8.4” fully featured camera-top and eld monitor system. The OR-841- HDSDI offers built-in W aveform Monitor , V ectorscope, Audio Bars, Built In Speaker with audio outputs, and several diagnostic tools.
Precision White Balance with Color T emperature Adjustment White balance adjustment is essential in order to render colors correctly . T o display colors correctly , gray scale should maintain identical color temperature. The white balance for ORCHID monitors defaults to D65 (6500K) so the user does not need to adjust white balance.
Installation and Initial Setup Unpacking Carefully unpack the OR-841-HDSDI monitor and verify that the following items are included: • OR-841-HDSDI Monitor • 12V 4A XLR Power Supply with 4-Pin Female XLR Connector • Operating Instructions Inspect the unit for any physical damage that may have occurred during shipping.
Power Button with Indicator Press power switch to turn on the Unit. The indicator LED will turn Green. Press again to put the OR-841-HDSDI into standby mode. The LED will turn Red. T ri-Color T ally Light 30mm T ri-Color tally lamp controlled via the Remote connector on the rear of the unit.
R ear Panel Features Parallel R emote RJ-45 Pin Assignments Pin 1 GPI 1 Pin 2 GPI 2 Pin 3 GPI 3 Pin 4 GPI 4 Pin 5 GND Pin 6 GPI 5 Pin 7 GPI 6 Pin 8 GPI 7 GPI Input RJ-45 connector for 7 user -assignable GPI inputs. Assignable using the on-screen menu.
OR -841-HDSDI Compatible Formats 8 Format HD/SD -SDI 480 / 60i ü 576 / 50i ü 480 / 60p 576 / 50p 720 / 60p ü 720 / 50p ü 720 / 30p ü 720 / 25 ü 720 / 24p ü 1080 / 60p 1080 / 50p 1080 / 60i (30P.
On- Screen Menu OR-841-HDSDI MENU STRUCTURE O VERVIEW INFO [1080i / 60] MODEL NAME OR-841-HDSDI OPTION CARD N/A OPTION S/N INPUT SDI INPUT FORMA T 1080i / 60 COLOR MA TRIX 709 COLOR TEMP D65 VERSION 0.
On- Screen Menu (continued) OR-841-HDSDI MENU STRUCTURE O VERVIEW AUDIO [ON] RETURN LEVEL METER ON / OFF METER BACKGROUND ON / OFF DISPLA Y CHANNELS 1~16 ACTIVE CH ONL Y ACTIVE, ALL METER COLUMNS DUAL.
USER ASSIGN F-1 THRU F-9 COLOR CHANNEL AUDIO PRESET 5 SCAN AUDIO PRESET 6 ASPECT AUDIO PRESET 7 ZOOM AUDIO PRESET 8 HV DELA Y LA YOUT A MARKER LA YOUT B AUDIO METER W A VEFORM MON AUDIO PRESET 1 VECTO.
On- Screen Menu (continued) REMOTE PIN 1 THRU 8 (Pin 5 is Ground) R T ALL Y G T ALL Y B T ALL Y LEFT R T ALL Y LEFT G T ALL Y LEFT B T ALL Y RIGHT R T ALL Y RIGHT G T ALL Y RIGHT B T ALL Y SETUP RETUR.
Contrast • V aries between 0 and 100 (80 is standard). • 80 is default value with 100% gain of video signal. Saturation • V aries between 0 and 100 (50 is standard). • 50 is default value with nominal color saturation. • Setting to 0 should display as monochrome.
SCREEN SUBMENU ■ Scan Normal (Zero Scan) • Whole picture should be visible without any cropping. • When in normal mode, it should not see non-active areas such as SA V , EA V . Over (End-User TV Pr oduction Scan) • 5 % of t h e p i ct ur e i s cr o p p e d a nd z o o m e d t o l l t he s c r e e n .
■ Shift V Use the RotoMenu control to change the value of this setting, which will shift the picture V ertically . Negative values will move the picture DOWN, while Positive values will move the picture UP . MARKER CONFIGURA TION SUBMENU ■ Marker Use this setting to enable or disable all on-screen markers.
■ Level Meter Selects whether or not to display audio level meters. ■ Meter Backgr ound Selects whether or not to display meter background. ■ Display Channels Selects how many audio meters you want to display . Y ou may select any number of channels from 1 to 16.
■ Save CH Preset T o > Use this menu to select which one of 8 memory locations where the user wants to store the current channel output assignments. ■ CH Preset Use this menu to Lock or Unlock the ability to save to the Ch Preset memory locations.
VECTORSCOPE SUBMENU ■ Layout Use this menu to choose from several available preset screen layouts. Choosing any of the preset layouts will override the settings in the V ectorscope, Size, and Position menus. ■ V ectorscope Use this menu to turn the V ectorscope display On or Off when in the Normal mode.
Y Limits (These values are shared with WFM settings) Set luminance upper and lower limits to be monitored. • Limits are displayed in IRE unit • V aries between -7.
REMOTE SUBMENU Event T rigger • T wo types of events are allowed. • The falling event is when you pull down to ground, and the rising event is when you remove the ground and the pin returns to normal high state. • Falling events occurs only once and on the event of power up sequence.
■ TimeCode Selects among to following options: OFF / L TC / VITC1 / VITC2. In the most cases, the value of L TC and VITC1 will be identical to each other . ■ Power Save • When enabled, the monitor will go to sleep after a predened time has passed when loss of picture occurs.
Specifications Screen Size 8.4” Diagonal Display Ar ea (h x v) 6.7” x 5” Aspect Ratio 4:3 Pixels 1024 x 768 Color Depth 8-bit (16.7M colors) V iewing Angle (h x v) 85 ° + 85 ° (H) 50° + 60° (V) Brightness 400 cd/m 2 Contrast Ratio 400:1 Dimensions (w x h x d) 8.
23 Maintenance / Color Calibration Procedure ■ Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V -HWP-K). A clean micro-ber cloth can also be used using only non-abrasive and ammonia-free cleaning agents.
W arranty Marshall Electronics warranties to the rst consumer that this OR-841-HDSDI LCD monitor will (under normal use) be free from defects in workmanship and materials, when received in its original container , for a period of one year from the purchase date.
An important point after buying a device Marshall electronic OR-841-HDSDI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marshall electronic OR-841-HDSDI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marshall electronic OR-841-HDSDI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marshall electronic OR-841-HDSDI you will learn all the available features of the product, as well as information on its operation. The information that you get Marshall electronic OR-841-HDSDI will certainly help you make a decision on the purchase.
If you already are a holder of Marshall electronic OR-841-HDSDI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marshall electronic OR-841-HDSDI.
However, one of the most important roles played by the user manual is to help in solving problems with Marshall electronic OR-841-HDSDI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marshall electronic OR-841-HDSDI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
