Instruction/ maintenance manual of the product TT-15S1 Marantz
Go to page of 19
Model TT -15S1 User Guide T ur ntab le.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPOR T ANT SAFETY INSTR UCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.
20. Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
1 CONTENTS CONTENTS ............................................................................................................................................1 BEFORE USE ..............................................................................
2 This section must be read before any connection is made to the mains supply. 7 Equipment Main P ower Setting Your Marantz product has been prepared to comply with the household power and safety requirements that exist in your area. TT-15S1 can be powered by 120V AC only.
3 A CCESSORIES Before using the turntable, please make sure that you have all of the following accessories. 1. T ur ntab le chassis 2. Center shaft 3. T one ar m 4.
4 A CCESSORIES 9. 2 Drive belts (1 spare belt) 10. Bear ing oil 11. T ur ntable sheet 12. 3 Allen wrenches (large/medium/small) 1 adjustment screwdriv er 13. Record clamp ( “ Cle v er clamp ” produced by Souther n Engineering) 14. Counter weight 15.
5 ASSEMBLING AND ADJUSTING 1. Installing the ground wire Connect the ground wire to the turntable shaft base. 2. Inserting the center shaft Insert the center shaft into the turntable chassis. 3. Installing the turntable Place the turntable onto the center shaft.
6 ASSEMBLING AND ADJUSTING b-2) Direction The direction position is correct when the tone arm is parallel with the side of the turntable base. b-3) When you have determined the height and direction of the tone arm attachment position, tighten the tone arm fixing screw using the Allen wrench (large).
7 ASSEMBLING AND ADJUSTING c) Attach the cartridge that you attached in the previous step to the tone arm. • When using the included cartridge Attach to the front attachment hole position on the tone arm. • When using a different cartridge Attach the cartridge so that it is 32mm from the stylus tip.
8 ASSEMBLING AND ADJUSTING d) Lower the lifter lever, and rotate the counter weight to balance the tone arm so that it is parallel with the turntable. e) After finding the balance, raise the lifter lever and attach the anti-skating adjustment screw. 7.
9 ASSEMBLING AND ADJUSTING 9. Attaching the motor pulle y Attach the motor pulley to the motor. Using the adjustment screwdriver included to fix the pulley ’ s 3 plastic screws. Be careful not to turn the screws with too much force, as they are made from plastic and can break easily.
10 NAMES AND FUNCTIONS q P ower switc h (OFF , ON) When it is switched ON, the turntable rotates. w Pulley This is changed to suit the rpm speed of the record to be played. 33 1/3 rpm record ....................................[Lower side] 45 rpm record .
11 CONNECTIONS AND OPERA TION 7 Connections Make sure that the power supply to both this turntable and the amplifier are OFF before you start connecting. 1. Connect the PHONO cables (L: white, R: red) that are connected to the toner arm to the corresponding L and R [PHONO] input terminals on your amplifier.
12 TR OUBLE SHOO TING If you think a malfunction has occurred, first check the points listed below. 7 Are each of the connections correct? 7 Are y ou operating the turntable correctly as described in this instruction manual? If the turntable does not operate correctly, check all of the items in the following table.
13 SPECIFICA TIONS AND EXTERNAL DIMENSIONS DIA GRAM 7 T urntable section RPM ................................................33 1/3 rpm, 45 rpm Drive system ..........................................Belt drive system Turntable ........................
14 The section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz equipment. 7 Cleaning external surfaces of equipment The exterior finish of your unit will last indefinitely with proper care and cleaning, Never use scouring pads, steel wool, scourging powders or harsh chemical agents (e.
www .marantz.com You can find your nearest Marantz Authorized Dealer on our website. U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.
An important point after buying a device Marantz TT-15S1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marantz TT-15S1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marantz TT-15S1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marantz TT-15S1 you will learn all the available features of the product, as well as information on its operation. The information that you get Marantz TT-15S1 will certainly help you make a decision on the purchase.
If you already are a holder of Marantz TT-15S1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marantz TT-15S1.
However, one of the most important roles played by the user manual is to help in solving problems with Marantz TT-15S1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marantz TT-15S1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
