Instruction/ maintenance manual of the product SR6200 Marantz
Go to page of 31
Model SR6200 User Guide AV Surround Receiver R.
vii CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSON.
i IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.
ii 19. Servicing-Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
iii AV SURROUND RECEIVER SR6200 UP SURROUND VOLUME DOWN MEMORY TUNING/PRESET MODE F/P CLEAR NIGHT ATT DISPLAY OFF SLEEP S-DIRECT DIMMER MUTE A/D 7CH INPUT POWER ON/OFF PHONES STANDBY AUX INPUT MUTE S-.
iv (75 Ω ) GND AM FM AUDIO CENTER REMOTE CONTROL OUT CENTER SURR. CENTER SURR. L R SPEAKER SYSTEMS CENTER SURR.CENTER SURROUND FRONT OUT VCR1 OUT VCR2 DSS / TOR MONI S - VIDEO VIDEO OUT OUT OUT VCR2.
v (75 Ω ) GND AM FM AUDIO CENTER REMOTE CONTROL OUT CENTER SURR. CENTER SURR. L R SPEAKER SYSTEMS CENTER SURR.CENTER SURROUND FRONT OUT VCR1 OUT VCR2 DSS / TOR MONI S - VIDEO VIDEO OUT OUT OUT VCR2 .
1 ENGLISH TABLE OF CONTENTS INTRODUCTION .............................................................................................................................................................. 2 DESCRIPTION .....................................
2 ENGLISH INTRODUCTION Thank you for purchasing the Marantz SR6200 DTS/Dolby Digital Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR6200.
3 ENGLISH FRONT PANEL FEATURES (SEE PAGE iii.) q POWER switch and STANDBY indicator When this switch is pressed once, the unit turns ON and display appears on the display panel.
4 ENGLISH REAR PANEL CONNECTIONS (SEE PAGE iii.) All connections to the rear panel should be made with the entire system powered off. To avoid errors, it is advisable to connect one cable at a time between the various components. a FM antenna terminal (75 ohms) Connect an external FM antenna with a coaxial cable, or a cable network FM source.
5 ENGLISH - IN OUTPUT INPUT 5-13VDC + INVERT OUT VIDEO/ EXT.CONT.IN 8 OHMS REMOTE CONT. SPEAKER SYSTEM (75 Ω ) GND AM FM AUDIO CENTER REMOTE CONTROL OUT CENTER SURR. CENTER SURR. VID O U I N IN TV DVD VCR1 VCR2 DSS / OUT TAPE TAPE / MD CDR CD R L IN VCR2 DSS / VCR1 OUT R L IN / OUT DIGITAL DIG.
6 ENGLISH REMOTE CONTROL OPERATION • The remote control unit (RC6200SR) provided with the SR6200 is a “ learning ” -type, programmable unit capable of controlling almost any component in your system, as well as the Marantz D-BUS components (RC-5).
7 ENGLISH n P.SCAN (preset scan) This button is used to start preset scan when SR6200 is selected TUNER mode. m MEMO button Memory enable button for various preset functions. , CONTROL buttons These buttons are used when operating the CD player, TAPE deck, etc.
8 ENGLISH ¤6 Input system selector buttons/ FUNCTION SELECTOR buttons (AUDIO/ VIDEO INPUT) Press one of these buttons once or twice to select a particular source component. For example, to set the amplifier or receiver to the DVD input, press the DVD button ¤6 twice within 2 seconds.
9 ENGLISH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 TOTAL SYSTEM KEY NO.
10 ENGLISH OPERATION OF REMOTE CONTROL UNIT 1. Remote control The distance between the transmitter of the remote control unit and the IR SENSOR of the SR6200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control ma y not be possible .
11 ENGLISH SET-UP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY (OSD) MENU SYSTEM The SR6200 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote controller.
12 ENGLISH OSD MAIN MENU 1. Press the AMP button ¤6 . 2. Press the MENU button ¤0 to display the “ MAIN MENU ” of the on- screen display menu. Choose a desired item in the contents with or button, and press the OK button to select. Display will change to menu for each item.
13 ENGLISH SPEAKERS SETUP The home theater system you already have installed should function provided that there are left, center and right front speakers, left and right rear/surround speakers and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units.
14 ENGLISH SURROUND MODE SOURCE DIRECT : Switch the source direct ON or OFF with or button. This bypasses the surround processing and crossover for the main speakers (front left and right will be full range and the subwoofer will be ON) Note: Surround mode cannot be changed in Source Direct mode.
15 ENGLISH BASIC OPERATION LISTENING TO THE TUNER MANUAL TUNING 1. To select the tuner as the source, press the TUNER button t on the front panel or press the TUNER button ¤6 on the remote. 2. Press the TUNER button t on the front panel or press the TUNER button ¤6 on the remote to select the desired frequency band if required.
16 ENGLISH STATION NAME PRESET (On PRESET display mode) The station name preset function allows the name of each preset channel to be entered using alphanumeric characters. The Station Name button is valid only in the tuner mode. Before station name preset operation, store stations with the preset memory operation.
17 ENGLISH SETTING THE SLEEP TIMER Set the sleep timer while the power is turned on. 1. Turn the power ON and press the SLEEP button o / c . 2. Press the SLEEP button o / c the number of times to set the desired sleep time in minutes.
18 ENGLISH 2. FUCTION SELECT & SURROUND MODE When a function selector button or surround mode button is pressed VIDEO: Displays the current video source. When TV,DSS, DVD, VCR1 or AUX is selected with the function selector, both AUDIO and VIDEO shows the same name.
19 ENGLISH SURROUND MODES The SR6200 incorporates digital signal processors (DSP) which can reproduce various surround effects you experience in concert halls and movie theaters, etc. These Surround Modes, are provided to reproduce a variety of surround sound effects, according to the content of the source to be played.
20 ENGLISH The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector knob of the SR6200 or the remote control unit. However, the sound from the speakers depend upon the relationship between the selected surround mode and the input signal.
21 ENGLISH CAUSE The power plug is not connected. Mute is on. The input cable is not connected correctly. The master volume control is turned all the way down. The function selector position is wrong. The headphones are connected to the headphone jack.
22 ENGLISH GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits.
TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................................................................................................................................. 87.5 - 108.0 MHz Usable Sensitivity ...........
R is a registered trademark. Printed in China 01/05 MITi 321W851250 COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA Jamo Australia Pty. Ltd.
An important point after buying a device Marantz SR6200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marantz SR6200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marantz SR6200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marantz SR6200 you will learn all the available features of the product, as well as information on its operation. The information that you get Marantz SR6200 will certainly help you make a decision on the purchase.
If you already are a holder of Marantz SR6200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marantz SR6200.
However, one of the most important roles played by the user manual is to help in solving problems with Marantz SR6200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marantz SR6200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
