Instruction/ maintenance manual of the product SR6001 Marantz
Go to page of 19
RS-232C Control Specification : Rev 00 Marantz America, Inc. 2007 All rights ar e reserved. Reproduction in whole or in part is pr ohibited without the written consen t of copyright. All specifications might be subj ect to change without notice. SR6001 RS-232C Control Specification Categ ory : A/V Receiver Document V ersion : 1.
SR6001 RS-232C Control Specification Page: 2 / 19 Document V ersion [1.00] Company Restricted T able of Contents 1. Introduction ................................................................................................................... ......
SR6001 RS-232C Control Specification Page: 3 / 19 Document V ersion [1.00] Company Restricted 1. Introduction 1-1. Purpose This document was written as a reference specification of products that are c ontroled by the hos t controller . 1-2. Scope This document would be using b y software or hardware en gineers for produc tion of the produc t.
SR6001 RS-232C Control Specification Page: 4 / 19 Document V ersion [1.00] Company Restricted 3. Det ailed Description The inter face specification between the product and a H ost controller is described below .
SR6001 RS-232C Control Specification Page: 5 / 19 Document V ersion [1.00] Company Restricted 3-2. T ransm ission dat a format 3-2-1. T ransmission data format from Host to Slave There ar e two kin ds of transmissio n dat a form from Ho st shown b elow .
SR6001 RS-232C Control Specification Page: 6 / 19 Document V ersion [1.00] Company Restricted 3-3. The trans action sequences and th e regulations 3-3-1. The t ransaction sequ ences The transac tions have three k inds of sequence. *A transac tion is a Command from Host then Slave will be an answer by S tatus answer , ACK or NAK.
SR6001 RS-232C Control Specification Page: 7 / 19 Document V ersion [1.00] Company Restricted 3-3-5. Examples of the handshaking flow chart 3-3-5-1. Example of su ccessful handshaking SL A VE HOST C o.
SR6001 RS-232C Control Specification Page: 8 / 19 Document V ersion [1.00] Company Restricted 4. Recommendations of Command, S tatus and Lay er definition - All Commands, S tatuses and Layers will be defined other spe cific document.
SR6001 RS-232C Control Specification Page: 9 / 19 Document V ersion [1.00] Company Restricted 5. Definitions of Command, S tatus and Lay er This section is told how to define “Command”, “S tatus” and “Layer” of this pr oduct. 5-1. Normal Command List This chapter will show the commands of this product.
SR6001 RS-232C Control Specification Page: 10 / 19 Document V ersion [1.00] Company Restricted 5-1-2. Display and Menu con tent s Command Reply from Sla ve V ALUE “SLP:0xx ” (xx=”00 ”~”90”.
SR6001 RS-232C Control Specification Page: 11 / 19 Document V ersion [1.00] Company Restricted 5-1-3. Surround content s Command Reply from Sla ve AUTO “SUR:00” STEREO “SUR:01” DOLBY “SUR:02.
SR6001 RS-232C Control Specification Page: 12 / 19 Document V ersion [1.00] Company Restricted Command Reply from Sla ve TOGGLE “NGT :0” OFF “NGT :1” NIGHT MODE ON “NGT :2” “NGT :0” (invalid) “NGT :1” (OFF) “NGT :2” (ON) VA L U E “LIP:0xxx” (xxx = value ms) UP “LIP:1” (up 10ms) Lip Sync.
SR6001 RS-232C Control Specification Page: 13 / 19 Document V ersion [1.00] Company Restricted 5-1-6. Multi Room content s Command Reply from Sla ve TO GGLE “M PW:0” OFF “MP W:1” Multi Room A .
SR6001 RS-232C Control Specification Page: 14 / 19 Document V ersion [1.00] Company Restricted Command Reply from Sla ve V ALUE “MSV :0xxx” UP “MSV :1” Multi RoomA Sp e a k e r VOLUME DOWN “MSV :2” “MSV :xxx” xxx = V ol.
SR6001 RS-232C Control Specification Page: 15 / 19 Document V ersion [1.00] Company Restricted 5-3. St atus request and S tatus an swer list 5-3-1. Normal St atus request an d S tatus (answer and feed.
SR6001 RS-232C Control Specification Page: 16 / 19 Document V ersion [1.00] Company Restricted S tatus reques t S tatus answer a nd feedback Digital Signal Format “SIG:?” x = ‘0’ :No detect ’1’ :D DIGIT AL AC-3 ‘2’ : D DIGIT AL AC-3 PL ‘3’ : D DIGIT AL SURR.
SR6001 RS-232C Control Specification Page: 17 / 19 Document V ersion [1.00] Company Restricted S tatus reques t S tatus answer a nd feedback OFF “MP W:1” Multi Room A POWER “MPW :?” ON “MP W.
SR6001 RS-232C Control Specification Page: 18 / 19 Document V ersion [1.00] Company Restricted 5-3-2. Layer of the statuses St a t u s Layer POWER “P WR:” 1 AUDIO A TT “A TT :” 3 AUDIO MUT E “AMT :” 1 VIDEO MUTE “VMT :” 1 VOLUME “VOL:” 1 TONE BAS S “TOB: ” 1 TONE TREBLE “TOT :” 1 SOURCE Select “SRC:” 1 7.
SR6001 RS-232C Control Specification Page: 19 / 19 Document V ersion [1.00] Company Restricted St a t u s Layer Multi Room A POWER “MPW :” 1 Multi Room A SPEAKER “MSP:” 2 Multi Room A AUDIO MU.
An important point after buying a device Marantz SR6001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marantz SR6001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marantz SR6001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marantz SR6001 you will learn all the available features of the product, as well as information on its operation. The information that you get Marantz SR6001 will certainly help you make a decision on the purchase.
If you already are a holder of Marantz SR6001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marantz SR6001.
However, one of the most important roles played by the user manual is to help in solving problems with Marantz SR6001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marantz SR6001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
