Instruction/ maintenance manual of the product SR5300 Marantz
Go to page of 40
Model SR5300 User Guide AV Surround Receiver R.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.
20 . Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL .
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL .
iii AV SURROUND RECEIVER SR5300 UP SURROUND VOLUME DOWN MEMORY TUNING/PRESET MODE F/P CLEAR SLEEP S-DIRECT DIMMER MUTE A/D 6.1CH IN POWER ON/STANDBY PHONES STANDBY AUX INPUT S-VIDEO VIDEO L AUDIO R DS.
1 ENGLISH TABLE OF CONTENTS INTR ODUCTION ............................................ 2 DESCRIPTION ............................................... 2 FEA TURES .................................................... 3 FR ONT P ANEL FEA TURES ...........
2 ENGLISH INTRODUCTION Thank you for purchasing the Marantz SR5300 DTS/Dolby Digital Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR5300.
3 ENGLISH FEATURES BUILT-IN 6 CHANNEL POWER AMPLIFIER 90 watts to each of the six main channels ; the power amp section features an advanced, premium high- storage power supply capacitors, and fully discrete output stages housed in cast aluminum heat sinks .
4 ENGLISH FRONT PANEL FEATURES (SEE PAGE iii.) q POWER switch and STANDBY indicator When this switch is pressed once, the unit turns ON and display appears on the display panel.
5 ENGLISH REAR PANEL CONNEC- TIONS (SEE PAGE iii.) All connections to the rear panel should be made with the entire system powered off. To avoid errors, it is advisable to connect one cable at a time between the various components. a FM antenna terminal (75 ohms) Connect an external FM antenna with a coaxial cable, or a cable network FM source.
6 ENGLISH REMOTE CONTROL OPERATION OPERATION The provided remote control unit is a universal remote controller . The POWER button x , numeric buttons .
7 ENGLISH ⁄7 CLEAR button This button is used to cancel for certain memory or programming operations. ⁄8 DIMMER button When this button is pressed once, the display is dimmed. When this button is pressed twice, the display is turned off and the “ DISPLAY OFF ” indicator lights up.
8 ENGLISH OPERATION OF REMOTE CONTROL UNIT REMOTE CONTROL The distance between the transmitter of the remote control unit and the IR SENSOR of the SR5300 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.
9 ENGLISH CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround center and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units.
10 ENGLISH 120W 1A MAX UNSWITCHED 120W 1A MAX SWITCHED MODEL NO. SR5300 (75 Ω ) GND AM FM AUDIO CENTER REMOTE CONTROL OUT CENTER SURR. CENTER SURR. L R SPEAKER SYSTEMS AC OUTLETS (120V 60Hz) CENTER SURR.
11 ENGLISH (75 Ω ) GND AM FM AUDIO CENTER REMOTE CONTROL OUT CENTER SURR. CENTER SURR. 100W MAX SWITCHED L R SPEAKER SYSTEMS AC OUTLET (230V 50Hz) CENTER SURR.
12 ENGLISH AUDIO REMOTE CONTROL OUT CENTER SURR. CENTER SURR. 100W MAX SWITCHED L R SPEAKER SYSTEMS AC O (230V CENTER SURR.CENTER SURROUND FRONT TOR MONI S - VIDEO VIDEO OUT VCR2 DSS / VCR2 DSS / VCR1.
13 ENGLISH ADVANCED CONNECTING CONNECTING MULTI CHANNEL AUDIO SOURCE The 6.1CH INPUT jacks are for multi channel audio source such as SACD multi channel player, DVD audio player or external decoder. If you use these jacks, switch on 6.1CH INPUT and setup 6.
14 ENGLISH CONNECTING THE ANTENNA TERMINALS ASSEMBLING THE AM LOOP ANTENNA 1. Release the vinyl tie and take out the connection line. 2. Bend in the reverse direction. 3. Inserting into the hole to attach the loop antenna to the antenna stand. 4. With the antenna on top any stable surface.
15 ENGLISH SETUP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR5300 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote control unit.
16 ENGLISH INPUT SETUP (ASSIGNABLE DIGITAL INPUT) Four digital inputs can be assigned as the desired source. Use this menu to select the digital input jack to be assigned to the input source. 1. Select “ INPUT SETUP ” in SETUP MAIN MENU with or cursor button, and press the OK button.
17 ENGLISH SPEAKER DISTANCE (TIME ALIGNMENT) Use this parameter to specify the distance of each speaker ’ s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room.
18 ENGLISH PREFERENCE 1. Select “ PREFERENCE ” in SETUP MAIN MENU with or cursor button, and press the OK button. 2. To select a desired content, press or cursor button. TV AUTO: Select the TV AUTO ON/OFF function to enable or disable with or cursor button.
19 ENGLISH CS2 (CIRCLE SURROUND II) PARAMETER 1. Select “ CS2 ” in SETUP MAIN MENU with or cursor button, and press the OK button. 2. To Select desired contents as below, press or cursor button TRUBASS: Set the TRUBASS level between 0 and 6 level in 1 level interval with or cursor button.
20 ENGLISH BASIC OPERATION LISTENING TO THE TUNER MANUAL TUNING 1. To select the tuner as the source, press the TUNER button t on the front panel or press the TUNER button c on the remote. 2. Press the TUNER button t on the front panel or press the TUNER button c on the remote to select the desired frequency band if required.
21 ENGLISH STATION NAME PRESET (On PRESET display mode) The station name preset function allows the name of each preset channel to be entered using alphanumeric characters. The Station Name button is valid only in the tuner mode. Before station name preset operation, store stations with the preset memory operation.
22 ENGLISH ON SCREEN DISPLAY INFOMATION The on-screen display, which can be activated by the Main unit or remote, appears on the TV screen to show the current setting status of the SR5300. 1. GENERAL INFORMATION When the OSD button ¤2 is pressed, the current setting are displayed on the TV monitor.
23 ENGLISH SURROUND MODE The SR5300 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup.
24 ENGLISH STEREO This mode bypasses all surround processing. Stereo program sources the left and right channels play normally when PCM-audio or analog stereo is input. With Dolby Digital and DTS sources, the 5.1 multi-channels are converted to two channel stereo.
25 ENGLISH SURROUND INPUT SIGNAL OUTPUT CHANNELS FLUORESCENT INDICATOR MODE L/R C SL/SR SC SW FORMAT STATUS & SURROUND MODE TEMPORARY DISPLAY STATUS AUTO DOLBY DIGITAL(5.
26 ENGLISH SURROUND INPUT SIGNAL OUTPUT CHANNELS FLUORESCENT INDICATOR MODE L/R C SL/SR SC SW FORMAT STATUS & SURROUND MODE TEMPORARY DISPLAY STATUS CS2 CINEMA DOLBY DIGITAL(5.1CH) - - - - - CS2 MUSIC OLBY DIGITAL(2CH) - - - - - CS2 MONO DOLBY DIGITAL(2CH:Lt/Rt) - - - - - DOLBY DIGITAL EX(6.
27 ENGLISH CAUSE The power plug is not connected. Mute is on. The input cable is not connected correctly. The master volume control is turned all the way down. The function selector position is wrong. The headphones are connected to the headphone jack.
28 ENGLISH GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits.
29 ENGLISH TECHNICAL SPECIFICATIONS 1-1/16 inch (27 mm) 14-7/8 inch (378 mm) 16-3/4 inch (425 mm) 16/13 inch (20 mm) 6-7/16 inch (164 mm) 9/16 inch (14 mm) 5-7/8 inch (150 mm) 17-5/16 inch (440 mm) FM TUNER SECTION Frequency Range ....................
SETUP CODES CD Aiwa ........................................................................ 0151, 0184 Burmester .......................................................................... 0447 California Audio Labs ...................................
TV AOC ........................................................................ 0046, 0057 Admiral .................................................................... 0120, 0490 Aiko ...................................................................
VCR Admiral .................................................................... 0075, 0236 Adventura .......................................................................... 0027 Aiko ................................................................
DV D Aiwa .................................................................................. 0668 Apex .................................................................................. 0699 Denon ......................................................
Printed in China COUNTRY COMPANY ADDRESS ALGERIE Azur 2000 8, Lotissement Ben Hatadi, Alger, Algerie ARMENIA NGYIG Ltd. 47 A/75 St. Lalaiants, 375000 Yerevan, Armenia AUSTRALIA QualiFi Pty.
An important point after buying a device Marantz SR5300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marantz SR5300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marantz SR5300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marantz SR5300 you will learn all the available features of the product, as well as information on its operation. The information that you get Marantz SR5300 will certainly help you make a decision on the purchase.
If you already are a holder of Marantz SR5300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marantz SR5300.
However, one of the most important roles played by the user manual is to help in solving problems with Marantz SR5300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marantz SR5300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
