Instruction/ maintenance manual of the product PM4000 Marantz
Go to page of 9
1 Model PM4000 User Guide INTEGRA TED AMPLIFIER.
4 English English FOREWORD This section must be read before any connection is made to the mains supply. WARNINGS Do not expose the equipment to rain or moisture. Do not remove the cover from the equipment. Do not push anything inside the equipment through the ventilation holes.
5 English English !4 !4 !4 !4 !4 VOLUME CONTROL Adjusts the volume level. Turn the knob clockwise to increase the volume. !5 !5 !5 !5 !5 BALANCE CONTROL Turn the knob to correct an unbalanced program source such as stereo broadcast or to vary the output level of the left or right channel.
6 English English TAPE DECK OPERATION Control used for operating the tape deck. TAPE PLAYBACK 1. Set the INPUT SELECTOR switch A A A A A to TAPE or CD-R/MD . 2. Play a prerecorded tape on the tape deck. 3. Adjust the volume with the VOLUME control B B B B B .
7 English English REMOTE CONTROL UNIT RC8000PM The RC8000PM can be used to control a Marantz AV component equipped with a remote sensor as well as other Marantz compo- nents connected to the first component through the Remote Control Bus.
8 English English CARE AND MAINTENANCE This section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz equipment. CLEANING OF EQUIPMENT EXTERNAL SURFACES The exterior finish of your PM4000 will last indefinitely with proper care and cleaning.
49 MODEL PM4000 TECHNICAL SPECIFICATIONS (DIN) Power output RMS 8 Ohms/4 Ohms (40 Hz – 20 kHz) .................................................................................................................................. 30 / 40 W DIN 8 Ohms / 4 Ohms .
50 Figure 1 OUT IN OUT IN TAPE CD-R/MD AUX TUNER CD R L R L SYSTEM 2 SYSTEM 1 SPEAKER SYSTEMS SYSTEM 1 : 4 -16 OHMS SYSTEM 2 : 4 -16 OHMS SYSTEM 1+2 : 8 -16 OHMS L R PHONO GND Tighten the terminal 5 mm Loosen the terminal Inset the core Connection of speaker cable CD player Analogur output jacks or AV components, video disc player, etc.
51 Model PM4000 N V ersion Figure 2 OUT IN OUT IN TAPE CD-R/MD AUX TUNER CD R L R L SYSTEM 2 SYSTEM 1 SPEAKER SYSTEMS SYSTEM 1 : 4 -16 OHMS SYSTEM 2 : 4 -16 OHMS SYSTEM 1+2 : 8 -16 OHMS L R PHONO GND .
An important point after buying a device Marantz PM4000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marantz PM4000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marantz PM4000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marantz PM4000 you will learn all the available features of the product, as well as information on its operation. The information that you get Marantz PM4000 will certainly help you make a decision on the purchase.
If you already are a holder of Marantz PM4000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marantz PM4000.
However, one of the most important roles played by the user manual is to help in solving problems with Marantz PM4000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marantz PM4000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
