Instruction/ maintenance manual of the product M-CR511 Marantz
Go to page of 133
. Network Receiver M-CR511 Owner’s Manual You can print more than one page of a PDF onto a single sheet of paper. Contents Connections Playback Settings Tips Appendix 1 Front/Top panel Rear panel Re.
Accessories 6 Inserting the batteries 7 Operating range of the remote control unit 7 Features 8 Multiple music formats are supported, all in a compact form factor 8 Easy operation 8 Part names and fun.
Playback Basic operation 29 Turning the power on 29 Selecting the input source 29 Adjusting the volume 30 Turning off the sound temporarily 30 Listening to Internet Radio 31 Listening to Internet Radi.
Settings Menu map 71 Menu operation 74 Inputting characters 75 Using the number buttons 75 Using the cursor buttons 76 General 77 Alarm 77 Clock 78 Clock Mode 78 Volume Limit 79 Speaker Response 79 La.
Tips Tips 93 Troubleshooting 95 Appendix Playing back USB memory devices 107 Playing back Internet Radio 109 Playing back Bluetooth devices 109 Bluetooth communications 109 Playing back files stored o.
Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Inserting the batteries A Remove the rear lid in the direction of the arrow and remove it. . B Insert two batteries correctly into the battery compartment as indicated. . R03/AAA batteries C Put the rear cover back on. NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one.
Features Multiple music formats are supported, all in a compact form factor 0 Supports Internet Radio and music streaming Supports AirPlay ® ( v p. 54) You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC.
Part names and functions Front/Top panel . G T op panel H G Fr ont panel H q r t o yi u we Q2 Q1 Q3 Q0 Contents Connections Playback Settings Tips Appendix 9 Front/Top panel Rear panel Remote control .
. G T op panel H G Fr ont panel H q r t yi u we A N mark ( Q ) Touch this mark with a Bluetooth device that includes the NFC function when pairing (registering) with it. ( v p. 51) B Cursor buttons ( uio p ) These select items. C ENTER button This determines the selection.
. G Fr ont panel H oQ 2 Q 1 Q 3 Q 0 I Input source select button (INPUT) Selects the input source. ( v p. 29) J Standby indicator The standby indicator changes as shown below according to the status of the unit. 0 Power on : Off 0 Normal standby : Off 0 iPod charge standby : Red ( v p.
Rear panel . y u i t e w q r Contents Connections Playback Settings Tips Appendix 12 Front/Top panel Rear panel Remote control unit Index.
. t e w q r yu i A AC inlet (AC IN) Used to connect the supplied power cord. ( v p. 27) B Speaker terminals (SPEAKERS) Used to connect speakers. ( v p. 18) C Wi-Fi CONNECT buttons (iOS/WPS) Used to connect to the wireless LAN. (See the separate “Quick Setup Guide”.
Remote control unit A Remote control signal transmitter This transmits signals from the remote control unit. ( v p. 7) B CLOCK button The current time appear on the unit. ( v p. 69) C SLEEP button This sets the sleep timer. ( v p. 69) D Input source select buttons These select the input source.
G FAVORITES ADD / CALL buttons 0 To add radio stations or files to the favorite list, press ADD button. ( v p. 40) 0 To call up a radio station or file registered in the favorite list, press CALL button. ( v p. 40) H TOP MENU button To back to the top of the menu.
O DIMMER button Adjust the display brightness of this unit. ( v p. 70) P POWER button ( X ) This turns the power on/standby. ( v p. 29) Q VOLUME buttons ( df ) These adjust the volume level. ( v p. 30) R Information button (INFO) This switches display items such as the artist name and album name in the playback screen.
o Contents Speaker connection 18 Connecting a digital device 20 Connecting an analog device 21 Connecting an iPod or USB memory device to the USB port 22 Connecting to a home network (LAN) 24 Connecting the power cord 27 NOTE 0 Do not plug in the power cord until all connections have been completed.
Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer.
Connecting the subwoofer Use a subwoofer cable to connect the subwoofer. . Subwoofer Connecting speakers . RL Contents Connections Playback Settings Tips Appendix 19 Front/Top panel Rear panel Remote .
Connecting a digital device You can connect this unit to devices with digital audio output (TV, digital gear, etc.). . AUDIO OPTICAL OUT Digital device NOTE 0 Linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.
Connecting an analog device You can connect this unit to various devices with analog audio output. AUDIO L R OUT L R L R AUDIO Analog device Contents Connections Playback Settings Tips Appendix 21 Fro.
Connecting an iPod or USB memory device to the USB port 0 To connect an iPod/iPhone to this unit, use the USB adapter cable that was supplied with the iPod/iPhone. 0 For operating instructions, see “Playing an iPod” ( v p. 41) or “Playing files stored on USB memory devices” ( v p.
o Supported iPod/iPhone models . • iP od classic • iP od nano • iP od touch • iPhone Contents Connections Playback Settings Tips Appendix 23 Front/Top panel Rear panel Remote control unit Inde.
Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows.
Wireless LAN . Internet Modem T o W AN side Router with access point 0 With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically. 0 When using this unit with the broadband router’s DHCP function enabled, this unit automatically performs the IP address setting and other settings.
NOTE 0 The types of routers that can be used depend on the ISP. Contact your ISP or a computer shop for details. 0 This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE. 0 Do not connect a NETWORK connector directly to the LAN port/ Ethernet connector on your computer.
Connecting the power cord After completing all the connections, insert the power plug into the power outlet. . Power cord (supplied) To household power outlet (AC 220 - 230 V, 50/60 Hz) Contents Conne.
o Contents Basic operation Turning the power on 29 Selecting the input source 29 Adjusting the volume 30 Turning off the sound temporarily 30 Playback a device Playing an iPod 41 Playing a USB memory .
Basic operation . Input source select buttons POWER X VOLUME df MUTE Turning the power on 1 Press POWER X to turn on power to the unit. 0 You can also switch the power to standby by pressing X on the main unit. Selecting the input source 1 Press the input source select button to be played back.
Adjusting the volume 1 Use VOLUME df to adjust the volume. The volume level is displayed. 0 You can also adjust the volume by turning VOLUME df on the main unit. Turning off the sound temporarily 1 Press MUTE O . “MUTING” appears on the display. 0 To cancel mute, either adjust the sound volume or press MUTE O again.
Listening to Internet Radio . FAVORITES ADD/CALL 1 / 3 INTERNET RADIO SEARCH uio p ENTER INFO 0 Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. 0 The broad cast station types and specifications supported by this unit for playback are as follows.
Listening to Internet Radio This unit memorizes the last played Internet Radio station. If you press INTERNET RADIO to switch to the Internet Radio function from another input source, the last Internet Radio station you listened to is played. 1 Prepare for playback.
Operation buttons Function 1 / 3 Playback / Stop FAVORITES CALL Call from the Favorite list FAVORITES ADD Add to the Favorite list SEARCH Character search 0 If the list is not in alphabetical order, you may not be able to perform a character search.
Using vTuner to add Internet Radio stations to favorites There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations.
Playing back files stored on a PC and NAS . 1 / 3 8 9 MUSIC SERVER SEARCH uio p ENTER INFO RANDOM REPEAT FAVORITES ADD/CALL 0 This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA.
Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. If you are using a Media Server, be sure to apply this setting first. o When using Windows Media Player 12 (Windows 7 / Windows 8) 1 Start up Windows Media Player 12 on the PC.
Playing back files stored on a PC and NAS Use this procedure to play music files or playlists. 1 Prepare for playback. A Check the network environment, then turn on this unit’s power. “Connecting to a home network (LAN)” ( v p. 24) B Prepare the computer ( v Computer’s operating instructions).
o Files that can be played back See “Playing back files stored on PC or NAS” ( v p. 110). 0 WMA Lossless files can be played when using a server supporting transcoding, such as Windows Media Player Ver.
Favorite function . 0 – 9, +10 CH +, – CLEAR FAVORITES ADD/CALL uio ENTER This section provides information on the Favorite function. 0 The Favorite function allows you to register your favorite broadcast stations and files in the Favorite List in advance so that you can call and listen to the stations or files right away, whenever you want.
Registering stations or files to the favorites list 1 Press FAVORITES ADD while the Internet radio station or file to register is played back. 2 Use ui to select a number to register the station or file, and press ENTER. “Added To Favorites” is displayed and the registration is competed.
Playing an iPod . 1 / 3 8 9 REAR USB uio p ENTER FRONT USB INFO MODE RANDOM REPEAT 0 You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod. 0 For information on the iPod models that can be played back with this unit, see “Supported iPod/iPhone models” ( v p.
Listening to music on an iPod 1 Connect the iPod to the USB port. ( v p. 22) When you connect iPod to the front USB port, the input source automatically switches to “Front USB”. 2 Press FRONT USB or REAR USB to switch the input source to “Front USB” or “Rear USB”.
Setting operation mode (“On-Display” mode) In this mode, various lists and screens during playback on the iPod are displayed on the body. This section describes the steps up to playing back tracks on the iPod in “On-Display”. 1 Press MODE and display “On-Display”.
Charging the iPod/iPhone You can charge your iPod/iPhone by connecting it to USB port. o Standby charging If the unit enters power standby mode while the iPod/iPhone is charging, the unit will switch to standby charging mode, and the iPod/ iPhone will continue to be charged.
Playing a USB memory device . SEARCH 0 – 9, +10 8 9 uio p ENTER RANDOM REPEAT REAR USB FRONT USB INFO 1 / 3 0 Playing back music files stored on a USB memory device. 0 Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit.
Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port. ( v p. 22) When you connect USB memory device to the front USB port, the input source automatically switches to “Front USB”. 2 Press FRONT USB or REAR USB to switch the input source to “Front USB” or “Rear USB”.
Listening to music on a Bluetooth device . Bluetooth 1 / 3 8 9 SEARCH ENTER INFO Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device.
Playing music from Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 Press Bluetooth to switch the input source to “Bluetooth”.
Operation buttons Function 1 / 3 Playback / Pause 8 9 Skip to previous track / Skip to next track (Press and hold) Fast-reverse / Fast- forward 0 Press INFO on the remote control unit during playback to switch the display between Artist name, Album name, etc.
Pairing with other Bluetooth devices Pair a Bluetooth device with this unit. 1 Activate the Bluetooth settings on your mobile device. 2 Press SEARCH when the input source is “Bluetooth”. The device will go into the pairing mode. 3 Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device.
Reconnecting to this unit from a Bluetooth device After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit. This operation also needs to be performed when switching the Bluetooth device for playback.
3 Play back music on the Bluetooth device. This unit outputs music from the Bluetooth device. 0 When “Network Control” is set to “On”, startup and connection can be performed even when the unit power is off. 0 When you touch the N mark ( Q ) on this unit with the Bluetooth device that is playing back music, this unit outputs that music.
. AUX Listening to DIGITAL IN 1 Prepare for playback. Check the connection, then turn on this units. 2 Press AUX to select “AUX:Optical In”. 3 Play the component connected to this unit. 0 Only 2-channel linear PCM digital audio signals can be inputted through the DIGITAL IN connector of this unit.
AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. 0 You can stop AirPlay playback by pressing o or choosing other input source. 0 To see song and artist names together, press INFO on the remote control unit.
Playing songs from your iPhone, iPod touch or iPad If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can stream music stored in your “iPhone/iPod touch/iPad” directly to this unit. 1 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit.
Selecting multiple speakers (devices) It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 Click the AirPlay icon ' and select “Multiple”. 2 Check the speakers you want to use.
Spotify Connect function Spotify is the world’s most popular streaming service. If you subscribe to Spotify Premium, you can control your new speaker with your phone or tablet. Because Spotify is built-in to your speaker, you can still take calls or use other apps - the music never stops.
Remote play function You can use your home network to play back with this unit music files stored on PC, NAS, smartphones and portable audio players. In this case, you use PC, smartphones and portable audio players for operations. 0 The relevant devices should comply with the DLNA (Digital Living Network Alliance) Ver.
Settings required for each device You must make settings on DMC and DMS for Remote Play. Make the following settings. Also see the owner’s manual of each device for settings. o Settings on computer and NAS Make settings on computer and NAS to exchange data with DMR devices.
o Remote Play operations Operations are different for each device, but the procedures for preparing for Remote Play are the same. The preparation procedures are shown below. 1 Turn on this unit. 0 Make sure that this unit is connected to the network. 2 Display the music file playback screen on DMC.
Web control function You can control this unit from a web control screen on a web browser. . PC Router This unit Tablet 0 This unit and the PC or tablet need to be connected to the network properly in order to use the web control function. “Connecting to a home network (LAN)” ( v p.
4 Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.0.2”, enter “http://192.168.0.2”. . Please select the menu. news(45) Wikipedia YouTube Yahoo! Japan apple Bonjour http://192.
6 Operate. G Example 1 H Network Setting 1 . Friendly Name Friend ly Nam e Set Set Default Network Connection Select Connection Wired [+]DHCP or Proxy Test Connection NETW ORK NETWORK FIRMWARE o u i t y n Friendly Name setting E To change the Friendly Name, enter the new name in the text box and click “Set”.
7 Operate. G Example 2 H Network Setting 2 . Friendly Name Set Set Default Network Connection Select Connection Wi-Fi Save DHCP Proxy Settings NETW ORK Wi-Fi Setup Manual Manual None Key1 --- S SID Security Security Key Defaullt Key Address Name ON OFF ON OFF 192.
o Update on web screen “Web control function” ( v p. 61) settings must be completed in advance on a computer belonging to the same network. For information on obtaining update files, please contact our customer service center. 1 Click D from step 5 for the “Web control function”.
4 When the following screen is displayed, updating is complete. . Firmware New Firmware: xxx.fw Firmware upload status: 100% completed. The upload process finished successfully. Please close this. 0 Button names may vary depending on the OS language used on your computer.
Convenience functions . SETUP uio p DIMMER SLEEP CLOCK DBB/ TONE VOLUME df Adjusting the tone 68 Sleep timer function 69 Checking the current time 69 Switching the display’s brightness 70 Contents C.
Adjusting the tone 1 Press DBB/TONE to select the tone parameter to be adjusted. 2 Use ui to adjust the “Dynamic Bass Boost”, “Bass”, “Treble”, “Balance” or “S.Direct”. n Dynamic Bass Boost Emphasizes the bass sound in stages according to the volume (maximum +8 dB).
Sleep timer function You can have the power automatically switched to standby once a set time has elapsed. This is convenient for listening while going to sleep. 1 Press SLEEP during playback and select the setting time. 0 The o indicator on the display lights.
Switching the display’s brightness 1 Press DIMMER. 0 The brightness of the display switches each time the button is pressed (5 levels). 0 If the buttons are operated when the display is turned off, information is displayed temporarily at a low brightness level.
Menu map For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. o Quick Setup Setting items Description Page Quick Setup Performs the network settings using a Wizard style window.
o General Setting items Description Page Alarm Sets the timer playback. 77 Clock Sets the current time. 78 Clock Mode The clock is constantly displayed. 78 Volume Limit Make a setting for maximum volume. 79 Speaker Response Set the output frequency characteristics.
o Network Setting items Description Page Network Information Displays various information about the network. 84 Network Control Performs the ON/OFF settings for the network function when in standby mode. 84 Friendly Name Edits a name displayed on the Internet.
. SETUP uio p ENTER TOP MENU Menu operation 1 Press SETUP. The menu is displayed. 2 Use uiop to select the menu to be set or operated, then press ENTER. 3 Use ui to change to desired setting. 4 Press ENTER to enter the setting. 0 To return to the previous item, press o .
Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. 0 Friendly Name ( v p. 85) 0 Character input for the network functions ( v p. 32) Using the number buttons 1 Display the screen for inputting characters.
Using the cursor buttons 1 Display the screen for inputting characters. 0 To change a character, use op to align the cursor with the character that you want to change. 2 Use ui to change the character. 0 The types of characters that can be input are as shown below.
General Make various other settings. Alarm Set the once alarm and everyday alarm. o Once Once Alarm Setting: Set the once alarm to on. Off: The alarm does not operate. o Every Day Every Day: Set the everyday alarm to on. Off: The alarm does not operate.
Clock o Set the current time You can automatically adjust the clock of this unit using the Internet. 0 To use this function, the unit must be connected to the Internet. 1 Use ui to select your time zone, then press ENTER. 2 Use ui to select the summer time, then press ENTER.
Volume Limit o Make a setting for maximum volume Limits the volume to ensure safe use of this product, and also makes it easier to adjust the volume from AirPlay or an app to an ideal range. 30 / 45 / 60(Full throttle) / Other (Default : 30) When “Other” is selected, the volume upper limit can be set within the range of 16 - 60.
Language Set the language for display on the menu. English / Deutsch / Française / Italiano / Nederlands / Español / Svenska / Русский / Polski (Default :English) Auto-Standby When “Auto-Standby” is set to “On”, and no operations are made in the stopped state for the set amount of time, this unit automatically enters standby mode.
Firmware Set whether or not to check for firmware update, update the firmware, and display update, upgrade and alert notifications. o Update Update the firmware of this unit. Check For Update: Check for firmware updates. Update Start: Execute the update process.
o Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. Upgrade package: Display the items to be upgraded. Upgrade Status: Display a list of the additional functions provided by the upgrade. Upgrade Start: Execute the upgrade process.
Reset Perform this procedure if the display is abnormal or if operations cannot be performed. Various settings are reset to the factory default values.
Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network via DHCP, set “DHCP” to On (use the default setting).
Friendly Name The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. o Select Name Selects Friendly Name from the list.
Settings You can make detailed settings for the network. To change the network environment, perform “Quick Setup”. (For details on the operations, see the separate “Quick Setup Guide”.
n Proxy Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. Proxy (Off) or Proxy (On): Set the proxy server.
n Auto-Scan This automatically searches for networks. 1 From the list of the networks, select the one you want to connect to. 0 Select “Rescan” if the network cannot be found. 2 Make the following settings. Default Key: Select the default key. 0 When connecting to a WEP encrypted network, “Default Key” menu is displayed.
n Web Browser Setup Use a web browser to set up Wi-Fi. A Wi-Fi device that can perform web browse operations is required. 1 Read the precautions on the screen, and press ENTER. 2 Select “Marantz M-CR511” from the Wi-Fi network list of the Wi-Fi device.
5 Operate. G Example 1 H Network Setting 1 . Friendly Name Network Connection Select Connection Select Connection Test Connection NETW ORK Friend ly Nam e Network C onnect ion S elect C onnecti on S elect C on n Tes t C onnect i NETW O R K NETWORK r n Network connection settings D Click to change the network connection method.
n Manual Sets the wireless connection manually SSID : Input the name of the wireless network (SSID). Security: Select the encryption method according to the encryption setting of the access point you are using. Default Key: Select the Default Key. 0 When connecting to a “WEP” encrypted network, “Default Key” menu is displayed.
o Contents Tips Simple operations in the power off state 93 Simple operations for iPod/USB 93 I only want to recharge my iPod 93 Specifying the iPod track with the alarm function 93 Specifying the des.
Tips Simple operations in the power off state 0 When a input source select buttons, 1 / 3 button or FAVORITES CALL button is pressed, the operation is performed at the same time as the unit switches on. (“Basic operation” ( v p. 29), “Favorite function” ( v p.
Changing or resetting the network environment 0 Prepare the provided Quick Setup Guide, and run Setup – “Quick Setup”. For detailed settings, run Setup - “Network” - Settings.
Troubleshooting 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
o Operations cannot be performed through the remote control unit Symptom Cause / Solution Page Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. 7 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
o No sound comes out Symptom Cause / Solution Page No sound comes out of speakers. 0 Check the connections for all devices. 18 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected.
o Desired sound does not come out Symptom Cause / Solution Page Left/right volume balance is unbalanced. 0 Press the DBB/TONE button on the remote control to adjust the balance. 68 No sound from the sub woofer. 0 Check the subwoofer connections. 19 0 Switch the subwoofer power on.
o Sound is interrupted or noise occurs Symptom Cause / Solution Page During playback from the Internet radio or USB memory device, sound is occasionally interrupted. 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
o iPod cannot be played back Symptom Cause / Solution Page iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported. 23 0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized.
o USB memory devices cannot be played back Symptom Cause / Solution Page “No Connection” is displayed. 0 The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device. 22 0 USB memory devices of a mass storage class or those compatible with MTP are supported.
o Bluetooth cannot be played back Symptom Cause / Solution Page Bluetooth devices cannot be connected to this unit. 0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the Bluetooth device to enable the Bluetooth function.
o File names on the iPod/USB memory device are not displayed properly Symptom Cause / Solution Page The file names are not displayed properly (“…”, etc.). 0 Characters that cannot be displayed are used. This is not a malfunction. On this unit, characters that cannot be displayed are replaced with a “.
o The Internet radio cannot be played back Symptom Cause / Solution Page The radio station list is not displayed. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. 24 Internet Radio cannot be played.
o Music files on PC or NAS cannot be played back Symptom Cause / Solution Page Files stored on a computer cannot be played. 0 Files are stored in a non-compatible format. Record in a compatible format. 110 0 You are attempting to play a file that is copyright protected.
o Cannot connect by Wi-Fi Symptom Cause / Solution Page Cannot connect to the network. 0 The network name and password (WEP, etc.) settings are wrong. Configure the network settings according to the setting details of this unit.
Playing back USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit is compatible with WMA META tags. 0 If the image size of an album artwork exceeds 600 kB, then music may not be played back properly. o Compatible formats Sampling frequency Bit rate Bit length Extension WMA z 1 32/44.
z 1 Copyright-protected files can be played on certain portable players compatible with MTP. z 2 Only files that are not protected by copyright can be played on this unit. Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded in WMA format when ripped from a CD, etc.
Playing back Internet Radio o Playable broadcast station specifications Sampling frequency Bit rate Extension WMA 32/44.1/48 kHz 48 – 192 kbps .wma MP3 32/44.1/48 kHz 32 – 320 kbps .mp3 MPEG-4 AAC 32/44.1/48 kHz 16 – 320 kbps .aac/ .m4a/ .mp4 Playing back Bluetooth devices This unit supports the following Bluetooth profiles.
Playing back files stored on PC or NAS 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit is compatible with WMA META tags. 0 If the image size of an album artwork exceeds 600 kB, then music may not be played back properly.
z 1 Only files that are not protected by copyright can be played on this unit. Content downloaded from pay sites on the Internet are copyright protected. Also, files encoded in WMA format when ripped from a CD, etc. on a computer may be copyright protected, depending on the computer’s settings.
Explanation of terms o Audio ALAC (Apple Lossless Audio Codec) This is a codec for lossless audio compression method developed by Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data compressed to approximately 60 – 70% can be decompressed to exactly the same original data.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Sampling frequency Sampling involves taking a reading of a sound wave (analog signal) at regular intervals and expressing the height of the wave at each reading in digitized format (producing a digital signal). The number of readings taken in one second is called the “sampling frequency”.
vTuner This is a free online content server for Internet Radio. For inquiries about this service, visit the vTuner site below. vTuner website: http://www.radiomarantz.com This product is protected by certain intellectual property rights of Nothing Else Matters Software and BridgeCo.
o Others Pairing Pairing (registration) is an operation that is required in order to connect a Bluetooth device to this unit using Bluetooth. When paired, the devices authenticate each other and can connect without mistaken connections occurring.
Trademark information . “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
Specifications o Audio section 0 Audio amplifier Rated output: 2-channel driving 50 W + 50 W (6 Ω/ohms, 1 kHz, THD+N 0.7 %) Dynamic power: 60 W + 60 W (6 Ω/ohms, 1 kHz, THD+N 10 %) Output terminals:.
o Wireless LAN section Network type (wireless LAN standard): Conforming to IEEE 802.11b Conforming to IEEE 802.11g Conforming to IEEE 802.11n (Wi-Fi ® compliant) z 1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Radio frequency: 2.
o Bluetooth section Communications system: Bluetooth Version 2.1 + EDR (Enhanced Data Rate) Transmission power: Maximum 2.5 mW (Class 2) Maximum communication range: Approx.
o Clock/Alarm/Sleep Clock type: Power line frequency synchronized method (Within ±60 seconds per month) Alarm: Once alarm/Everyday alarm: One system each Sleep: Sleep timer: Max. 90 minutes o General Power supply: AC 220 - 230 V, 50/60 Hz Power consumption: 50 W Power consumption in standby mode : 0.
o Dimensions Unit : mm . 292 71 6 302 46 36 218 210 35 35 30 2 o Weight : 2.6 kg Contents Connections Playback Settings Tips Appendix 122 Front/Top panel Rear panel Remote control unit Index.
Index v A AirPlay ............................................................ 54 Alarm .............................................................. 77 v B Bluetooth device ............................................ 47 v D Display’s brightness .
v V Volume ........................................................... 30 vTuner ............................................................ 34 v W Web control function ...................................... 61 Wired LAN .............................
License This section describes software license used for this unit. To maintain the correct content, the original (English) is used. o Boost http://www.
Definitions. “Articles” means, collectively, all articles written by Author which describes how the Source Code and Executable Files for the Work may be used by a user. “Author” means the individual or entity that offers the Work under the terms of this License.
You may distribute the Executable Files and Source Code only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy of th.
No term or provision of this License shall be deemed waived and no breach consented to unless such waiver or consent shall be in writing and signed by the party to be charged with such waiver or consent. This License constitutes the entire agreement between the parties with respect to the Work licensed herein.
0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 0 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
o License information for the software used in the unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies.
.
. 3520 10404 00AM Copyright ©2015 D&M Holdings Inc. All Rights Reserved. 132.
An important point after buying a device Marantz M-CR511 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marantz M-CR511 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marantz M-CR511 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marantz M-CR511 you will learn all the available features of the product, as well as information on its operation. The information that you get Marantz M-CR511 will certainly help you make a decision on the purchase.
If you already are a holder of Marantz M-CR511, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marantz M-CR511.
However, one of the most important roles played by the user manual is to help in solving problems with Marantz M-CR511. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marantz M-CR511 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
