Instruction/ maintenance manual of the product 20 BIT DIGITAL TO ANALOG CONVERTER Manley Labs
Go to page of 11
MANLEY LABORATORIES, INC. OWNER'S MANUAL 20 BIT DIGITAL TO ANALOG CONVER TER.
CONTENTS INTRODUCTION 3 MAINS CONNECTIONS 4 FRONT PANEL 5 REAR PANEL 6 OPERATIONAL NOTES 7 WARRANTY 8 WARRANTY REGISTRATION 9 NOTES 10 SECTION PAGE.
INTRODUCTION THANK YOU!... for choosing the Langevin Digital To Analog Converter. The Langevin Digital To Analog Converter utilizes only the most modern componentry including the decidedly best 20 BIT Ultra Analog (TM) system, precision 1% metal film resistors, and highly regulated power rails.
MAINS CONNECTIONS Your unit has been factory set to the correct mains voltage for your country. The voltage setting is marked on the serial badge, located on the rear panel. Check that this complies with your local supply. Export units for certain markets have a moulded mains plug fitted to comply with local requirements.
OFF PROGRAM MUTE POWER ON 20 BIT Ultra Analog D TO A CONVERTER L R SET LEVEL FRONT PANEL A GAIN SET Factory set for a total gain of 8 dB, this control can be adjusted from as little as 3dB of gain to as much as 10dB To increase the volume of the Left channel turn control counter-clock-wise from center position.
REAR PANEL A IEC MAINS SOCKET Accepts standard 50/60 Hz AC mains voltage. B DAISY CHAIN (If provided) The incoming AC mains voltage is paralleled via this IEC plug and can power another unit simultaneously. C FUSE HOLDER To remove the fuse, push and turn the fuse holder cap.
OPERATIONAL NOTES SWITCHING ON The power switch is located on the right hand corner of the front panel. Flip the switch up to turn on the unit and down to turn off the unit.
SPECIFICA TIONS.
W ARRANTY All Manley Laboratories equipment is covered by a limited warranty against defects in materials and workmanship for a period of 90 days from date of purchase to the original purchaser only.
WARRANTY REGISTRATION We ask that you please fill out this registration form and send the bottom half to: MANLEY LABORATORIES REGISTRATION DEPARTMENT 13880 MAGNOLIA AVE. CHINO CA, 91710 Registration entitles you to product support, full warrenty benefits, and notice of product enhancements and upgrades.
NOTES.
An important point after buying a device Manley Labs 20 BIT DIGITAL TO ANALOG CONVERTER (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Manley Labs 20 BIT DIGITAL TO ANALOG CONVERTER yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Manley Labs 20 BIT DIGITAL TO ANALOG CONVERTER - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Manley Labs 20 BIT DIGITAL TO ANALOG CONVERTER you will learn all the available features of the product, as well as information on its operation. The information that you get Manley Labs 20 BIT DIGITAL TO ANALOG CONVERTER will certainly help you make a decision on the purchase.
If you already are a holder of Manley Labs 20 BIT DIGITAL TO ANALOG CONVERTER, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Manley Labs 20 BIT DIGITAL TO ANALOG CONVERTER.
However, one of the most important roles played by the user manual is to help in solving problems with Manley Labs 20 BIT DIGITAL TO ANALOG CONVERTER. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Manley Labs 20 BIT DIGITAL TO ANALOG CONVERTER along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
