Instruction/ maintenance manual of the product Q300 Manitowoc Ice
Go to page of 45
Q MODEL DISPENSER Q160/290/300 Service Manual Thank you for selecting a Manitowoc Dispenser, the dependability leader in ice making equipment and related products. With proper care and maintenance, your new Manitowoc Dispenser will provide you with m any years of reliable and economical performance.
Safety Notices Installation and start-up of this equipment should be done by a qualified service technician. When using or servicing a Q Model Dispenser, be sure to pay close attention to the safety notices in this manual. Disregarding the notices may lead to serious injury and/or damage to the dispenser.
Table of Contents i Table of Contents Section 1 – Troubleshooting Model/Serial Number Location ................................................................................................... ........................... 1-1 Model Numbers Covered in Manual .
Table of Contents ii THIS PAGE INTENTIONALLY LEFT BLANK.
Section 1 Troubleshooting 1-1 Troubleshooting This manual is a reference guide for the owner/operator, service agent and installer of this equipment. Please read this manual before installation or operation of the machine. If you encounter a problem, first consult the Trouble shooting Guide or Adjustments sections of this manual.
Troubleshooting Section 1 1-2 Warranty Information The packet containing this manual also includes warranty information. Warranty coverage begins the day your new dispenser is installed. Important Complete and mail the OWNER WARRANTY REGISTRATION CARD as soon as possible to validate the installation date.
Section 1 Troubleshooting 1-3 Equipment Overview The operation of the Q Series ice dispenser can be divided into three main operations. They are Dispenser Activation, Ice Pick-Up and Ice Delivery. Dispenser Activation Dispenser activation can be accomplished with a number of different mechanisms.
Troubleshooting Section 1 1-4 Room Key Card Activation 1. User places ice bucket under ice chute. 2. User places their hotel room key card into a slot on the dispenser which is labeled “Insert Room Key Card”. The room key activates the microswitch.
Section 1 Troubleshooting 1-5 WARNING Unplug unit before servicing or cleaning. Ice dispenser bin contains parts that can move at any time and will cause injury if hands are in the way. WARNING Unplug unit before servicing or cleaning. The agitator is operated by a timer and can agitate at anytime Electric Shock Hazard.
Troubleshooting Section 1 1-6 Problem: Ice Does Not Dispense When Ro cking Chute is Depressed. (continued) Problem Possible Cause To Correct The gearmotor runs, but the dispensing paddle wheel does not turn. Remove the paddle wheel pin. Is this pin broken, damaged, or missing? Remove the agitator and paddle wheel.
Section 1 Troubleshooting 1-7 Problem: Dispenser Crushes Ice as it Dispenses Problem Possible Cause To Correct Dispenser crushes ice as it dispenses. The ice in the bin is not the proper size and type? Is the ice being used a full size piece of ice, i.
Troubleshooting Section 1 1-8 THIS PAGE INTENTIONALLY LEFT BLANK.
Section 2 Component Disassembly 2-1 Disassembling the Dispenser Parts For Cleaning WARNING Unplug unit before servicing or cleaning. The agitator is operated by a timer and can agitate at anytime. Electric Shock Hazard. 1 Shut off water to ice machine.
Component Disassembly Section 2 2-2 Disassembling the Dispenser Parts For Cleaning (continued) 5 Lift the front panel off the catch hooks and set the panel aside. Removing the Drain Pan 1 The drain pan is visible when the front panel of the dispenser is removed.
Section 2 Component Disassembly 2-3 Removing the Drain Pan (continued) 4 Remove the inner drain pan. Clean the inner drain pan with sanitizing solution. (See page 4-9.) 5 After cleaning, place inner drain pan back into outer drain pan. 6 Slide drain pan back into place.
Component Disassembly Section 2 2-4 Disassembling the Rocking Chute/Door (continued) 3 Remove door lock. 4 Loosen the two thumbscrews of the metal support bracket.
Section 2 Component Disassembly 2-5 Disassembling the Rocking Chute/Door (continued) 8 Remove the two thumb screws from the plastic paddle wheel guard retainer. 9 Remove the paddle wheel guard retainer 10 Pull the stainless steel paddle wheel guard from the slot that is cut into the chute… 11 …and remove the paddle wheel guard retainer.
Component Disassembly Section 2 2-6 Re-Installing the Paddle Wheel Guard 1 When re-assembling the rocking chute/door, the paddle wheel guard is placed in the slot in the ice chute. Notice that a cylinder hinge is welded to the top front side of the paddle wheel guard, as shown in the picture above.
Section 2 Component Disassembly 2-7 Disassembling the Dispenser Parts For Bin Cleaning WARNING Unplug unit before servicing or cleaning. Ice dispenser bin contains moving parts that can move at any time and will cause injury if hands are in the way.
Component Disassembly Section 2 2-8 Disassembling the Dispenser Parts For Bin Cleaning (continued) 5 Move the agitator to one side and slide the agitator forward until the rear of the agitator shaft is clear of the bushing. 6 Remove the agitator from the bin area.
Section 2 Component Disassembly 2-9 Removal of the Gearmotor WARNING Unplug unit before servicing or cleaning. Electric Shock Hazard. 1 Remove the front panel from dispenser. (See pages 4-1 and 4-2.) 2 Remove paddle wheel pin, agitator, and paddle wheel.
Component Disassembly Section 2 2-10 Gearmotor Shaft Seal Replacement WARNING Unplug unit before servicing or cleaning. The agitator is operated by a timer and can agitate at anytime Electric Shock Hazard. 1 If the dispenser is top mounted with an ice machine, remove the ice m achine front panel.
Section 2 Component Disassembly 2-11 Gearmotor Shaft Seal Replacement (continued) 5 Locate the shaft seal on the underside of the bin insulator plate. CAUTION Know which side of the shaft seal you are accessing, the convex side or the concave (ridge) side.
Component Disassembly Section 2 2-12 Gearmotor Shaft Seal Replacement (continued) 8 Press the bin insulator plate back into place. 9 Replace the three bolts. Using a 7/16” nut driver, tighten a quarter turn past tight. 10 Replace the paddle wheel, agitator and paddle wheel pin in the dispenser.
Section 3 Electrical 3-1 Agitation Timer 121$'-867$%/(7,0(5:7(673,16 7KHQHZWLPHULVHTXLSSHGZLWKWHVWSLQV7KLV DOORZVRXWR.
Electrical Section 3 3-2 5H:LULQJ3URFHGXUH $ZLULQJFKDQJHPXVWEHPDGHLIWKHH[LVWLQJWLP HU RQWKHGLVSHQVHULVZLUHGZLWKWKHHOORZ.
Section 3 Electrical 3-3 121$'-867$%/(7,0(5 7KHDJLWDWLRQWLPHULVVWDQGDUGHTXLSPHQWIRUWKH IORRUVWDQGLQJGLVSHQVHU7KHSXUSRVHRI.
Electrical Section 3 3-4 $'-867$%/(7,0(5 7KHDJLWDWLRQWLPHULVVWDQGDUGHTXLSPHQWIRUWKH IORRUVWDQGLQJGLVSHQVHU7KHSXUSRVHRIWKH.
Section 3 Electrical 3-5 Adjusting the Coin Mechanism Timer 5HPRYHWKHFRQWUROER[FRYHU2QWKHLQVLGHRI WKHFRQWUROER[WKHUHLVDZKL.
Electrical Section 3 3-6 Wiring Diagrams 43$43$4)$ 3+ %HIRUH6HULDO1XPEHUV 32:(5 &25' 69 25$1*( %/$&.
Section 3 Electrical 3-7 43$43$4)$ 3+ 6HULDO1XPEHUVWR 25$1*( %/$&.
Electrical Section 3 3-8 43$43$4)$ 3+ $IWHU6HULDO1XPEHUV 32:(5 &25' 69$ 25$1*( %/$&.
Section 3 Electrical 3-9 43$43$4)$ %HIRUH6HULDO1XPEHUV 69 25$1*( %/$&.
Electrical Section 3 3-10 43$43$4)$ 6HULDO1XPEHUV.
Section 3 Electrical 3-11 43$43$4)$ $IWHU6HULDO1XPEHUV.
Electrical Section 3 3-12 45$45$&$5'23(5$7(' 3+ 3+ %HIRUH6HULDO.
Section 3 Electrical 3-13 45$45$&$5'23(5$7(' 3+ 3+ $IWHU6HULDO1XPEHUV 69$ $*,7$ 7,217,0(5 < :+,7( %/$&.
Electrical Section 3 3-14 45$45$&$5'23(5$7(' 3+ %HIRUH6HULDO1XPEHUV 69 $*,7$ 7,217,0(5 <(//2: :+,7( %/$&.
Section 3 Electrical 3-15 45$45$&$5'23(5$7(' 3+ %HIRUH6HULDO1XPEHUV $*,7$ 7,217,0(5 <(//2: :+,7( %/$&.
Electrical Section 3 3-16 4&$4&$&2,123(5$7(' 3+ 3+ %HIRUH6HULD.
Section 3 Electrical 3-17 4&$4&$&2,123(5$7(' 3+ 3+ $IWHU6HULDO.
Electrical Section 3 3-18 4&$4&$&2,123(5$7(' 3+ %HIRUH6HULDO1XPEHU $*,7$ 7,217,0(5 <(//2: :+,7( * %/8( 25$1*( 5(' %/$&.
Section 3 Electrical 3-19 4&$4&$&2,123(5$7(' 3+ After Serial Number 0405000000 $*,7$ 7,217,0(5 <(//2: :+,7( * %/8( 25$1*( 5(' %/$&.
.
W e reserve the right to make product improvements at any t ime. Specifications and design are subje ct to cha nge wi thou t noti ce. MANITOWOC ICE, INC. 2110 South 26th Street P.O. Box 1720 Manitowoc, W I 54221-1720 Phone: ( 920) 682-0161 Service Fax: ( 920) 683-7585 W eb Site - www.
An important point after buying a device Manitowoc Ice Q300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Manitowoc Ice Q300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Manitowoc Ice Q300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Manitowoc Ice Q300 you will learn all the available features of the product, as well as information on its operation. The information that you get Manitowoc Ice Q300 will certainly help you make a decision on the purchase.
If you already are a holder of Manitowoc Ice Q300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Manitowoc Ice Q300.
However, one of the most important roles played by the user manual is to help in solving problems with Manitowoc Ice Q300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Manitowoc Ice Q300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
