Instruction/ maintenance manual of the product K00375 Manitowoc Ice
Go to page of 2
K00375 ADAPTER KIT Installation Instructions The K00375 kit is used for installing Q-1400 or Q-Dual ice machines on a C-730 bin. 1. Note: Bin must be level before installation of ice machine. A. Remove the foam tape from the front and sides of the bin where the stainless deflector will be located.
Deflector Instructions 1. Remove the splash shield, water pump, and water trough from the ice machine. 1. Install the ice deflector, as shown, using two #10-32 mounti ng screws and tapping plate. Center the ice deflector directly beneath the water trough.
An important point after buying a device Manitowoc Ice K00375 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Manitowoc Ice K00375 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Manitowoc Ice K00375 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Manitowoc Ice K00375 you will learn all the available features of the product, as well as information on its operation. The information that you get Manitowoc Ice K00375 will certainly help you make a decision on the purchase.
If you already are a holder of Manitowoc Ice K00375, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Manitowoc Ice K00375.
However, one of the most important roles played by the user manual is to help in solving problems with Manitowoc Ice K00375. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Manitowoc Ice K00375 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center