Instruction/ maintenance manual of the product B1800 Manitowoc Ice
Go to page of 2
B1300/1800 W A TER TROUGH CONVERSION KIT Installation Instructions BEFORE STARTING, DISCONNECT POWER SUPPLY 1. Remove front panel. 2. Disconnect water pump and rotate outlet. A. Remove white distribution tube from water pump. B. Remove water pump mounting screws at bulkhead.
A. Install new insulation (supplied). B. Attach tube to dump valve. C. Attach 90 barbed elbow (supplied) to other end of tube and clamp (supplied). D. Attach other end of 90 barbed elbow to white distribution tube. 11. Reinstall water pump. A.
An important point after buying a device Manitowoc Ice B1800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Manitowoc Ice B1800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Manitowoc Ice B1800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Manitowoc Ice B1800 you will learn all the available features of the product, as well as information on its operation. The information that you get Manitowoc Ice B1800 will certainly help you make a decision on the purchase.
If you already are a holder of Manitowoc Ice B1800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Manitowoc Ice B1800.
However, one of the most important roles played by the user manual is to help in solving problems with Manitowoc Ice B1800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Manitowoc Ice B1800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center