Instruction/ maintenance manual of the product ST100 Manhattan Computer Products
Go to page of 15
Digita l Satellite Receiver PLAZA MODELS ST 100 / ST 120 ST 200 / ST 300 PLAZA MODELS ST 100 / ST 120 ST 200 / ST 300 Instruction Manual (English) http://www.
2 INTRODUCTION ..................................................................................................................................... 2 FEATURES ...........................................................................................
3 FEATURES €• 1 LNB input, IF signal loop through, supports Universal, Single, C Band and Wide Band LNB €‚ Multiple LNB switching 0/12V, 14/18 volts, 22KHz and DiSEqC 1.2 €ƒ 2 SCART, TV (CVBS / RGB) and VCR/DVD with loop through facility €„ S- Video output on mini DIN.
4 CONNECTORS AND DEFINITIONS Please do not connect the power to the receiver until all other connections have been made and checked. R1: AC IN (Power Cord) Connect this lead to the mains outlet (100 - 240 V AC 50/60 Hz) R2: LNB IN (IF Input) Connect the IF cable from your LNB to this connector .
5 F13: IRDETO CARD SLOT (For Models with embedded Irdeto) Insert your smart card into this slot. We recommend that you familiarize yourself with the remote control handset prior to installing the receiver. INS TALLATION For digital quality picture, connect the receiver to your TV using a fully wired SCART lead.
6 The receiver will automatically switch on and off at the stored times for each event. After the time has lapsed, it will reset that event to Off . On Time / Off Time: Using 0- 9 keys enter the time.
7 EXAMPLE: To configure four LNB Astra 2 (28.2E), select LNB No 1 and set DiSEqC to 1 Astra 1 (19.2E), select LNB No 2 and set DiSEqC to 2 Hotbird 1- 6 (13E), select LNB No 3 and set DiSEqC to 3 Thor .
8 Search Mode: Select search option for each satellite. See below for options. Options with + D will also in clude data channels €“ Auto All - All TP, Video and Radio channels. €” Auto All + D - All TP, Video, Radio and Data channels. €• Auto FTA - All TP for Free To Air Video and Radio channels.
9 Set Multisat Sear ch 2, LNB No 2 and select horizontal TP from low band. Adjust skew ( externally ) to - value for maximum signal and quality. Set Multisat Search 3, LNB No 3 and select vertical TP from high band. Adjust skew ( externally ) to + value for maximum signal and qua lity.
10 SATELLITE LIST Press SAT key and the combined channel and satellite list will appear. Select a channel from this list and exit. SELECTING RADIO CHANNELS P ress TV / RADIO key once and it will change to Radio mode. Press it again to change back to TV mode.
11 This menu is pre - configured and ready to upgrade. Select Start and press OK. If you have a motorized antenna, it will automatically move to Hot Bird 1- 6 (13.
12 ELECTRONIC PROGRAM GUIDE (EPG) INSTALLING FAVORITE CHANNELS There are 11 TV and 11 Radio channel lists you can create. You can rena me the headings to your requirement. Go to INSTALL menu and select Favorite Channels. Follow below steps. To delete a favorite channel Select Delete and press OK, the cursor will move to channel list on the right.
13 group and this will highlight these in red. When finished, press EXIT. Then store the settings. TO RENAME CHANNEL Select Rename and press OK. Select channel and press OK, a keypad will appear. Select char acter and press OK. After naming press EXIT.
14 4. When finis hed the slave receiver will reboot and come up with a channel. TROUBLE SHOOTING GUIDE If you suspect there is a problem with your receiver, please check the following trouble shooting guide before calling a Manhattan authorised service agent.
15 RF MODULATOR Frequenc y 470MHz to 860 MHz Channel Range UHF CH21 to 69 TV standard PAL BG/ I /K PAL M, NTSC M POWER SUPPLY Input Voltage 100 -- 240 V AC, 50/60Hz ~ Type SMPS Power Consumption Max 3.
An important point after buying a device Manhattan Computer Products ST100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Manhattan Computer Products ST100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Manhattan Computer Products ST100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Manhattan Computer Products ST100 you will learn all the available features of the product, as well as information on its operation. The information that you get Manhattan Computer Products ST100 will certainly help you make a decision on the purchase.
If you already are a holder of Manhattan Computer Products ST100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Manhattan Computer Products ST100.
However, one of the most important roles played by the user manual is to help in solving problems with Manhattan Computer Products ST100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Manhattan Computer Products ST100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
