Instruction/ maintenance manual of the product ST 250 Manhattan Computer Products
Go to page of 16
PLAZA MODELS ST 250 / ST 350 Digita l Satellite Receiver Instruction Manual (English) http://www.plaza - st.com ISSUE3.
2 INTR ODUCTION ..................................................................................................................................... 2 FEATURES ..........................................................................................
3 Welcome to the world of Manhattan digital satellite receiver that will make your life closer to your dream. Befo re using your new receiver, we suggest that you carefully read this manual and the following safety notice.
4 CONNECTORS AND DEFINITIONS Please do not connect the power to the re ceiver until all other connections have been made and checked. R1: AC IN (Power Cord) Connect this lead to the mains outlet (100 - 240 Volts AC, 50/60 Hz, 0.2Amps / 0.15Amps) R2: LNB IN (IF Input) Connect the IF cable from your LNB to this connector .
5 We recomme nd that you familiarize yourself with the remote control handset prior to installing the receiver. INSTALLATION For digital quality picture, connect the receiver to your TV using a fully wired SCART lead. If using the UHF TV OUT con nector then follow below step.
6 The re ceiver will automatically switch on and off at the stored times for each event. After the time has lapsed, it will reset that event to Off . On Time / Off Time: Using 0- 9 keys enter the time. STORE: After above settings move to store and press OK key SYSTEM INFORMATION This displays the software versions.
7 EXAMPLE: To configure four antennas Astra 2 (28.2E), select Antenna 1 and set DiSEqC to 1 Astra 1 (19.2E) select Antenna 2 a nd set DiSEqC to 2 Hotbird 1- 6 (13E), select Antenna 3 and set DiSEqC to 3 Thor 2, 3 (1W), select Antenna 4 and set DiSEqC to 4 12V: To select 12 volts output for relay type LNB switch.
8 €˜ TP All + D -- Selected TP for all Video, Radio and Data channels. €™ TP FTA -- Selected TP f or Free to Air Video and Radio channels. €š Manual All – Single TP for all Video and Radio channels. To select go to TP Data and press OK for sub menu.
9 CHANNEL SEARCH Go to Channel Search and configure following €¬ Search Index: Select index 1 €- Antenna: S elect reference 1 €® Satellite: Select satellite name. €¯ Search Mode: Select se arch option. €° TP Data: Select a lower band TP.
10 SORTING THE CHANNEL LIST Press Green key to sort channels alphabetically. Press Yellow key to sort channels Free To Air first followed by Scrambled. Press Red key to return to normal list. TO SELECT A CHANNEL FROM ANOTHER SATELLITE Press SAT key and t he combined channel and satellite list will appear.
11 TO SELECT SUBTITLES ON A CHANNEL Press SUB.T ( Blue ) key . S elect required language and press OK. The subtitles will appear after a few seconds. If not transmitted , it will state No Subtitles available . TO SELECT AUDIO LANGUAGE You can select an audio by pressing LANG key.
12 TO LOCK MENU AND CHANNELS ADVANCED INSTALLATION CHANNEL EDIT This section describes the use of the EDIT menu. It includes Channel, Satellite and TP edit functions. TO DELETE CHANNELS Select Delete and press OK. The cursor will move to TV channel list.
13 TO SORT SATELLITE LIST After adding a satellite select Sort and press OK. The list will be sorted by satellite positions in degrees. DELETING A TP TO DELETE A TP Select Delete and press OK, the cursor will move to TP list. Select the TP you want to delete and press OK.
14 TO RECORD PROGRAMS To sta rt recording, press REC key. The following record banner will appear. Please note that the picture will appear paused for a few seconds initially although there will be no pause in the actual recording. During recording you are actually watching the playba ck and therefore a pause is noticed before it begins.
15 TROUBLE SHOOTING GUIDE If you suspect there is a problem with yo ur receiver, please check the following trouble shooting guide before calling a Manhattan authorised service agent. WARNING! Do NOT attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric shock and will invalidat e your warranty .
16 POWER SUPPLY Type AP - 129B SMPS Input Voltage 100 -- 240 Volts AC, 50/60Hz, 0.2Amps / 0.15Amps Power Consumption Maximum 30W Protection Separate Internal Fuse Ambient Temperature Ra nge 0 – 45 Degrees C Usage This power supply is not for external use.
An important point after buying a device Manhattan Computer Products ST 250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Manhattan Computer Products ST 250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Manhattan Computer Products ST 250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Manhattan Computer Products ST 250 you will learn all the available features of the product, as well as information on its operation. The information that you get Manhattan Computer Products ST 250 will certainly help you make a decision on the purchase.
If you already are a holder of Manhattan Computer Products ST 250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Manhattan Computer Products ST 250.
However, one of the most important roles played by the user manual is to help in solving problems with Manhattan Computer Products ST 250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Manhattan Computer Products ST 250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
