Instruction/ maintenance manual of the product WLAR-L11-L Makita
Go to page of 12
Straight Shear Steel up to 400 N/mmz 1.3 mm (18 ga.) MODEL JS1300 Steel up to 600 Nlmm' 1 .O mm (20 ga.) Steel up to 800 N/mm2 0.5 mm (26 ga.) Aluminum up to 200 N/mmz 2.5 mm 113 ga.) INSTRUCTION MANUAL Strokes per minute 0 - 2,500 Overall length Net weight 302 mm (1 1-718") 1.
GENERAL SAFETY RULES USA002-1 (For All Tools) WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 1. Keep your work area clean and well lit.
11. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. 12. Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.
Specific Safety Rules USE01 1~2 1. Hold the tool firmly. 2. Secure the workpiece firmly. 3. Keep hands away from moving parts. 4. Edges and chips of the workpiece are sharp. Wear gloves. It is also recom- 5. Do not put the tool on the chips of the workpiece.
FUNCTIONAL DESCRIPTION Switch action CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released Switch trigger 1 Hook The hook is convenient for temporary hanging the tool.
ASSEMBLY Replacement of blades CAUTION: *Always be sure that the tool is switched off and unplugged before replacement of the blades. Never remove the blades with bare hands. Wear gloves. Otherwise it can cause injury. Removing cutting head Use the hex wrench to loosen the three screws which secure the cutting head.
Installing cutting head CAUTION: Secure the cutting head firmly. Otherwise it can rotate during operation and can cause serious injury. Insert the cutting head into the tool with turning it left and right alternately. Then tighten the three screws with the hex Cutting head 7 wrench.
MA1 NTE NANCE CAUTIO N : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Lubrication Before operation, lubricate the contact point of the center blade and the side blades R/L. And, also lubricate the point of the center blade near the cutting head.
ACCESSORIES CAUTION These accessories or attachments are recommended for use with your Makita tool specified in this manual The use of any other accessories or attachments might present a risk of inju.
10.
ITEM NO. DESCRIPTION 1 2 3 4 5 6 1 8 10 11 12 13 14 15 16 11 18 19 20 22 23 24 25 26 21 28 29 30 31 32 33 34 35 36 31 38 39 40 41 42 43 44 45 46 41 48 CENTERBLADE SIDE BLADE R SLEEVE 5 SIDE BLADE L CUTTING HEAD COMPLETE HEX.
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of Califomia] to cause cancer, birth defects or other reproductive harm.
An important point after buying a device Makita WLAR-L11-L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita WLAR-L11-L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita WLAR-L11-L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita WLAR-L11-L you will learn all the available features of the product, as well as information on its operation. The information that you get Makita WLAR-L11-L will certainly help you make a decision on the purchase.
If you already are a holder of Makita WLAR-L11-L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita WLAR-L11-L.
However, one of the most important roles played by the user manual is to help in solving problems with Makita WLAR-L11-L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita WLAR-L11-L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
