Instruction/ maintenance manual of the product UMLOOOD Makita
Go to page of 12
m Effective cutting width 100 mm 14") 100 mm (4") MODEL UMlOOOD 100 mm (4") MODEL UMlOOODW With Fast Charger Net weight 1 kg 12 2 lbsl Strokes per min 1,000 Dimensions IL x W x HI 320 m.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- READ ALL INSTRUCTIONS. 1.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) AWG Size of Cord 1. SAVE THESE INSTRUCTIONS - This manual 25 50 100 150 18 18 18 16 contains important safety and operating instructions for battery charger.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0 Always switch off the tool before insertion or removal of the battery cartridge. .To remove the battery cartridge, pull out the set plate on the bottom of the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
Switch action To prevent the trigger from being acciden- tally pulled, a lock-off lever is provided as a safety feature. To start the tool, slide the lock-off lever in the direction of the arrow and pull the trigger.
When trimming twigs and foliage, do not I attempt to trim too much at a time. Pro- ceed gently. Also, do not attempt to cut thick branches. NOTE : You can expect up to 45 minutes running time on a single charge.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. Blade maintenance If the blades become dull or slightly dam- aged by contact with foreign matter, they can usually be restored to their original performance by sharpening with a file.
Removing or installing blade Seriously damaged blades or blades that have been sharpened numerous times should be replaced. Replacement is accom- plished by loosening the screws and remov- ing the blades. When installing the new blades rotate the I gear so that its ring is positioned in the Gear blade guide hole.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Mar -10-'87 EN 100 mm (4") CORDLESS GRASS SHEAR Model UMIOOOD Note: The switch and other part configurations may differ from country to country.
EODEL UMlOOOD 13 14 15 16 17 18 19 20 21 22 23 Apr 19-85 EN 1 1 1 1 1 1 1 1 1 5 1 ‘;“OM ,& DESCRIPTION 10 11 12 11 21 31 44 51 61 I1 81 91 1 1 1 sponge Seal Stop Ring E-4 Pen 5 Pan Head Screw .
An important point after buying a device Makita UMLOOOD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita UMLOOOD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita UMLOOOD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita UMLOOOD you will learn all the available features of the product, as well as information on its operation. The information that you get Makita UMLOOOD will certainly help you make a decision on the purchase.
If you already are a holder of Makita UMLOOOD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita UMLOOOD.
However, one of the most important roles played by the user manual is to help in solving problems with Makita UMLOOOD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita UMLOOOD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
