Instruction/ maintenance manual of the product UML03DST Makita
Go to page of 16
Battery-Powered Grass Shear 100 mm (4”) MODEL UMl03D 100 mm (4”) MODEL UMl03DST With Battery & Charger INSTRUCTION MANUAL Effective cutting width Strokes per min.
IMPORTANT SAFETY INSTRUCTIONS (For Gardenina Atmliances) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS.
operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual.
IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY & CHARGER -~ Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger.
ADDITIONAL SAFETY RULES FOR BATTERY 1. Always charge the Makita battery 122 immediately after purchase. 2. Always recharge the Makita battery 122 after use. 3. Be sure to charge the Makita battery 122 for approx. one week every six months, when not using it for long periods.
ADDITIONAL SAFETY RULES FOR CHARGER 1. The Makita charger Model DC122 is specifically designed to charge only the Makita battery 121 or 122. Do not attempt to charge any other battery with this charger. 2. Handle the charger carefully. Do not drop or strike it.
DC122 122 Approx. 1 hour 121 Approx. 2 hours 4, u/ Adaptor cord--, DC121 Approx. 2 hours Approx. 4 hours Connector Adaptor cord Inlet CAUTION : 0 Always charge the Makita battery 122 immediately after purchase. 0 Always recharge the Makita battery 122 after use.
Switch action To prevent the trigger from being acciden- tally pulled, a lock-off button is provided. To start the tool, push in the lock-off button and pull the trigger.
0 per at ion Turn the tool on and hold it so that the "foot" of the tool rests on the ground. Then gently move the tool forward into the area to be cut. When trimming around curb, fence or trees, move the tool along them. Be careful not to contact them with the blades.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery is disconnected from the tool before attempting to perform inspection or maintenance. Blade maintenance After operation, clean off the blades (both sides) with a stiff brush.
When installing the new blades, rotate the I gear so that its ring is positioned in the blade guide hole. With the blades held Ring I in this position, replace the screws and tighten them securely. Guide hole CAUTION : Do not remove the grease on the gears or ring when replacing the blades.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Dec.-19-'94 US 100 mm (4") Model UM103D BATTERY-POWERED GRASS SHEAR Note: The switch and other part configurations may differ from country to country.
Dec.-19-’94 US MODEL UMlO3D 14 21 31 41 51 61 71 81 ‘:,‘OM ,& DESCRIPTION 10 11 12 13 14 15 16 $2D OESCRIPTION 91 1 1 1 1 1 4 1 Tapping Screw 4x20 HOUsmg Set IWllh Item 51 Switch Inlet Housi.
15.
Recycling the battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1) Remove belt from the battery 2) Ship or take battery to your nearest Makita Factory Service Center or Distributor that sells Makita lead batteries.
An important point after buying a device Makita UML03DST (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita UML03DST yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita UML03DST - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita UML03DST you will learn all the available features of the product, as well as information on its operation. The information that you get Makita UML03DST will certainly help you make a decision on the purchase.
If you already are a holder of Makita UML03DST, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita UML03DST.
However, one of the most important roles played by the user manual is to help in solving problems with Makita UML03DST. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita UML03DST along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
