Instruction/ maintenance manual of the product UM140DST Makita
Go to page of 8
Recycling the battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1) Remove belt from the battery 2) Ship or take battery to your nearest Makita Factory Service Center or Distributor that sells Makita lead batteries.
IMPORTANT SAFETY INSTRUCTIONS __ 1 1 Name Plate 2 1 Screw M5x33 3 6 Tapping Screw 8T M4x16 4 1 Handle Set Wth Item 81 5 1 Inlet 6 1 Compression Spring 3 1 1 Lock.
Dec -19-'94 US 140 mm (5-1/2") Model UM140D BATTERY-POWERED GRASS TRIMMER 3 // 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. ck for alignment of mounting, and any r other part that.
IMPORTANT SAFETY INSTRUCTIONS ACCESSORIES 1. 2. 3. 4. 5. 6. 7. 8. 9. IO. 11. 12. 4 FOR BATTERY & CHARGER SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery is disconnected from the tool before attempting to perform inspection or maintenance. Cleaning the cap and safety guard After use, clean off the cap and safety I Safety guard guard with a soft brush.
ADDITIONAL SAFETY RULES FOR CHARGER 1. The Makita charger Model DC122 is specifically designed to charge only the Makita battery 121 or 122. Do not attempt to charge any other battery with this charger. 2. Handle the charger carefully. Do not drop or strike it.
Switch action To prevent the trigger from being acciden- tally pulled, a lock-off button is provided. To start the tool, push in the lock-off button and pull the trigger.
Installing the safety guard (safety cover) Install the safety guard on the motor hous- ing as shown in the figure. Then secure the safety guard with the screw. Install the blades onto the pins. Turn the cap and the blade retainer clock- wise until the pins fit into the holes in the blade retainer with a little click.
An important point after buying a device Makita UM140DST (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita UM140DST yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita UM140DST - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita UM140DST you will learn all the available features of the product, as well as information on its operation. The information that you get Makita UM140DST will certainly help you make a decision on the purchase.
If you already are a holder of Makita UM140DST, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita UM140DST.
However, one of the most important roles played by the user manual is to help in solving problems with Makita UM140DST. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita UM140DST along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
