Instruction/ maintenance manual of the product UH3000DW Makita
Go to page of 16
Cordless Hedge Trimmer Effective cutting blade length 300 mm (1 1.314”) 300 mm (11-3/4”) MODEL UH3000D 300 mm (11-3/4”) MODEL UH3000DW With Fast Charger ~~ Strokes per min. 950 Dimensions (L x W x HI Net weight 1,6 kg (3,5 ,bs) 605 mm x 72 mm x 110 mm (23-718” x 2.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
13. DO NOT ATTEMPT TO REPAIR TRIMMER - Have repairs made by qualified 14. Hold the tool firmly with both hands. 15. It is extremely dangerous to grasp branches while cutting. If the blades jam, because of a piece of wire or impacted branch, switch off immediately and remove the material stuck in the blades.
9. Do not operate charger with damaged cord or plug - replace them im- mediately. IO. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 11. Do not disassemble charger or battery cartridge; take it to a qualified serviceman when service or repair is required.
Installing or removing battery cartridge Always switch off the tool before insertion or removal of the battery cartridge. .To remove the battery cartridge, pull out the set plate on the bottom of the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
Side grip Switch operation The switch has a special lock-off lever to prevent accidental operation or tampering. When the lever is pressed in the arrow direc- tion (see photo at right), the trigger can be pulled to put the trimmer ON; simply release the trigger to switch OFF.
2) Grip the trimmer with both hands and move it in front of your body. 3) To cut a hedge top evenly, it helps to tie a string or cord at the desired hedge height and to trim along it.
5) Trim boxwood or rhododendron from the base toward the top for a nice ap- pearance and good job. CAUTION : 1. Be careful not to accidentally contact a metal fence or other hard objects while trim- 2. Do not leave the tool in rain, or in wet location.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. After cutting is finished, clean off cutters (both sides) with a wire brush. Wipe off with a cloth and apply machine oil of low viscosity.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Mar-10-'92 EN 300 mm (11-3/4") CORDLESS HEDGE TRIMMER Model UH3000D Note: The switch and other part configurations may differ from country to country.
MODEL UH3000D 'i,'df ,&, DESCRIPTION 12 13 14 15 16 17 18 19 20 21 400 Mar -10-'92 EN 'LkM ,$& DESCRIPTION 1 1 1 1 1 1 3 1 1 2 1 MACHINE 10 11 41 51 61 71 81 91 1 1 Battery 7000 Set Plate nouslng set lwtth Item is1 Compression Spring 3 Lock-Oft Lever Switch Lever Battery Holder Switch Motor 1D.
13.
14.
.
The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 2. a). or b). 1 Ni-Cd 1.
An important point after buying a device Makita UH3000DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita UH3000DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita UH3000DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita UH3000DW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita UH3000DW will certainly help you make a decision on the purchase.
If you already are a holder of Makita UH3000DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita UH3000DW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita UH3000DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita UH3000DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
