Instruction/ maintenance manual of the product JS1660 Makita
Go to page of 10
MODEL JS1660 Strokes per Mild steel Hard steel Stainless Aluminum minute Max. cutting capacities INSTRUCTION MANUAL Overall Net length weight DOUBLE INSULATION SPECIFICATIONS Manufacturer reserves the right to change specifications without notice. Note: Specifications may differ from country to country.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
Adjusting blade clearance Adjust the clearance between the side blades and the center blade according to the thickness of the workpiece. First use a screwdriver to loosen the screw. Workpiece thickness (mm) Less than 0.8 (1 /32") 0.8 - 1.3 (1/32" - 3/64") More than 1.
Switch action To start the tool, move the slide switch forward, and the slide switch will lock in the "ON" position. To stop, lightly depress the rear of the slide switch, and it will re- turn to the "OFF" position.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Workpiece Thickness Replacing carbon brushes Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark.
ACCESSOR I ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
May-08-'87 EN STRAIGHT SHEAR Model JS1660 Note: The switch, noise suppressor and other part configurations may differ from country to country. 8.
MODEL JS1660 'EM ,& DESCRIPTION 15 16 17 18 19 July-17-'89 US ';iM ,,& DESCRIPTION 1 1 1 1 1 MACHINE ~ 24 25 26 27 28 29 st 1 1 1 1 1 1 1 14 1 1 20 1 1 21 1 Pan Head Screw M4x35 (With Washer) Block Hex.
MAKmA LIMED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is wananted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita JS1660 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita JS1660 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita JS1660 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita JS1660 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita JS1660 will certainly help you make a decision on the purchase.
If you already are a holder of Makita JS1660, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita JS1660.
However, one of the most important roles played by the user manual is to help in solving problems with Makita JS1660. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita JS1660 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
