Instruction/ maintenance manual of the product HRIGODH Makita
Go to page of 20
Cordless Rotary Hammer Equipped with electric brake 16 mm (5/8”) MODEL HRIGODH 16 mm (518”) MODEL HRl6ODWH With Fast Charger INSTRUCTION MANUAL 13 mm (112”) SPEC I FI CAT1 0 N S Model HRIGODH 20 mm 16 mm ~ 950 ~~ 3,600 296 mm x 70 mm x 232 mm 2.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool.
IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
ADDITIONAL SAFETY RULES 1. Wear a hard hat (safety helmet), safety glasses and/or face shield. It is also highly recommended that you wear a dust mask, ear protectors and thickly padded gloves. 2. Be sure the bit is secured in place before operation. 3.
Installing or removing the battery cartridge Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool.
Side grip (auxiliary handle) The side grip swings around to either side, allowing easy handling of the tool in any position. Loosen the side grip by turning it counterclockwise, swing it to the desired position and then tighten it by turning clockwise.
Turn the change ring in the direction of the arrow until the 1 mark on the change ring is aligned with 0 mark on the rubber cap to secure the bit. Depth gauge The depth gauge is convenient for drilling holes of uniform depth. Insert the depth gauge into the hole in the grip base.
Reversing switch action I This tool has a reversing switch to change the direction of rotation. Move the lever to the ' position for clockwise rotation or the * position for counterclockwise rotation u Switch trigger ~ CAUTION: Always check the direction of rotation before operation.
Torque limiter The torque limiter will actuate when a certain torque level is reached. The motor will disengage from the output shaft. When this happens, the bit will stop turning. CAUTIO N : As soon as the torque limiter actuates, switch off the tool immediately.
6. Rotate the chisel so that the chisel faces toward the direction suitable for your work. Then secure the chisel and chisel dapter to the tool using the clamp screw on the chisel adapter. 7. Set the action mode changing knob to "hammering only".
CAUTIO N : Never use "rotation with hammering" when the drill chuck assembly is installed on the tool. The drill chuck assembly may be damaged. Also, the drill chuck will come off when reversing the tool. NOTE: If you need assembled the drill chuck and chuck adapter assembly, proceed as follows.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replace- ment parts.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Bit grease 100 g; 3.5 oz Part No 181 573-3 Dust cup Part No. 421342-3 Dust extractor attachment Part No. 1921 76-8 Plastic carrying case Part No. 824445-6 Stopper pole Part No. 321 144-6 Safety goggle Grey lens: Part No. 191684-A Clean lens: Part No. 191685-A Fast charger Model DC1201 Part No.
Sep -08-'94 US CORDLESS ROTARY HAMMER Model HRIGODH Note: The switch and other part configurations may differ from country to country. 18.
MODEL HHlGODH Sep -08-'94 US ~~ MACHINF 11 158 37 431 __ 7:' , 1 OR~nqli IFOM ED DESCRIPTION MhE 37 1 38 I 1 39 j 1 40 1 41 1 42 ~ 1 43 ~ 1 44 1 45 ~ 1 48 , 1 46 1 41 1 49 1 50 1 51 1 52 ~ 1.
The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. i Ni-Cd To recycle the battery: 1. Remove the battery from the tool 2.
An important point after buying a device Makita HRIGODH (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita HRIGODH yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita HRIGODH - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita HRIGODH you will learn all the available features of the product, as well as information on its operation. The information that you get Makita HRIGODH will certainly help you make a decision on the purchase.
If you already are a holder of Makita HRIGODH, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita HRIGODH.
However, one of the most important roles played by the user manual is to help in solving problems with Makita HRIGODH. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita HRIGODH along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
