Instruction/ maintenance manual of the product HR5000 Makita
Go to page of 15
n Capacities Core bit Tungsten carbide bit Hume pipe 50 mm 150 mm 255 mm 12"1 15 71B"I 110") 50 mm (2") MODEL HR5000 Overall Net No load Blows speed IRPMl minute per length weight .
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don’t carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
ADDITIONAL SAFETY RULES 1. Wear a hard hat (safety helmet), safety glasses and/or face shield. It is also highly recommended that you wear a dust mask, ear protectors and thickly padded gloves. 2. Be sure the bit is secured in place before operation. 3.
Side handle The side handle can be secured in four positions (right, left, up and down). To secure the side handle, tighten the wing nut securely. Never secure the side handle in other than the above four positions. Side grip The side grip is convenient for downward drilling or chipping operations.
Selecting action mode Rotation with hammering: For drilling in concrete, masonry, etc., rotate the change lever to the posi- tion. Hammering only: For chipping, scaling or demolition opera- tions, rotate the change lever to the ? posi- tion. CAUTION : .
Hammer drilling operation Position the bit at the location for the hole, then pull the trigger. Do not force the tool. Light pressure gives best results. Keep the tool in position and prevent it from slipping away from the hole. Do not apply more pressure when the hole becomes clogged with chips or particles.
To remove the core bit, follow the procedures (1) or (2). 1) Rotate the change lever to the posi- tion. Then rest the core bit on the con- crete and turn the tool on. The core bit will come loose from the hammering action. 2) Hold the adapter with the wrench, in- sert the rod into the hole in the core bit and tap with a hammer to unscrew.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes When the resin insulating tip inside the carbon brush is exposed to contact the commutator, it will automatically shut off the motor.
Lubrication Lubricate the tool every time the carbon brushes are replaced. Run the tool for several minutes to warm it up, then rest the tool on the table with the bit end pointing upwards. This will allow the old grease to collect inside the crank housing.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessoreis or attachments might present a risk of injury to eprsons. The accessories or attachments should be used only in the proper and intended manner.
Core bit 0 Rod Part No. 256815-5 H~~~~~ grease 30 cc Part No. 181490-7 0 Hex wrench 4 Part No. 783202-0 0 Hex wrench 6 Part No. 783204-6 0 Steel carrying case Part No. 181997-3 0 Hex wrench 5 Part No. 783203-8 0 Lock nut wrench 35 Part No. 782407-9 0 Grip 32 Part No.
50 mm (2") @7hnKitrr ROTARY HAMMER Sep-084l8 EN Model HR5000 Note: The switch, noise suppressor and other part configurations may differ from country to country.
MODEL HR5000 ';'OM {2D DESCRIPTION MACHINE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 .
MAKKA LIMED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita HR5000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita HR5000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita HR5000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita HR5000 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita HR5000 will certainly help you make a decision on the purchase.
If you already are a holder of Makita HR5000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita HR5000.
However, one of the most important roles played by the user manual is to help in solving problems with Makita HR5000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita HR5000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
